REPAIRS TO B/R WORKS ALONGWITH ROOF TREATMENT AND REPAIRS/MAINT TO EATHING AND ALLIED CONNECTED WORKS TO OTM ACCN BLDG AT AF STATION HIGH GROUND

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area not exc. 1.5sqm each and removing from site all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete.

Refixing shutters of any description exceeding 1 Sqm and not exc 2 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete..

Resuring or easing & adjusting, without taking down, shutters of any description exceeding 1 Sqm and nexc 2 Sqmeach complete.

S&F 125 x 60mm pressed steel frames 1.25mm thick for doors,windows with one or more rebates incl necessary fixing lugs,hinges lock, strike plate etc.

S&F 105x60mm pressed steel frames 1.25mm thick for doors,windows with one or more rebates incl necessary fixing lugs,hinges lock, strike plate etc.

S&F factory made solid PVC single door frames of size 50 x 47mm made out of 5mm plain colour PVC Sheets reinforeced with MS Square tubbing in opening as per specification.

S/F Framed work of rolled mild steel conforming to Fe-290 (GdeE165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc, drilled for fixing of steel sheeting or other covering; doors etc to be prepared for hanging or sliding with and including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting, running rails & guides) and hanging, fastening & fixing complete.

Supply and fixing factory made 35mm thick 2nd class hard wood plane framed panneled shutter (two panel) with pannels of 9mm BWP /12mm veneered particle board with commercial veneered on both faces as specified & directed. de tapering from 10mm to 5mm around the panel on one side fitted to chowkats. The size of rail and style as per IS 1003 (Part-1)Kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fixing factory made 35mm thick glazed and Skelton shutter (two panel) of 2nd class hardwood (Hollock) open rebated and prepared to receive glass,gauge etc.divided into squares with plain chamfered or rounded mitred and rebated sash bars any number, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. Size of members of shutters as specified in SSR Part-1 clause 8.20(a) all as specified.

S/FFactory made solid PVC moulded door shutter with particle board core, 28 to 30 mm thick (stiles) with 2 raised panel design with 2 mm thick Moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face complete.

S&F 28-30mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides complete shall be provided with beading all around complete as specified and directed.

S&F fixed in repair block boards grade I quality exterior grade to timber frame work 19 to 20mm thick and shall be provided with beading all around complete as specified and directed.

S&F factory made box type steel ventilator fixed type with one shop coat of zinc chromate primer complete all as specified and directed.

S&F factory made box type steel window with pintol hinges and 2 Nos 150mm mild steel tower bolt, 2Nos of steel handle and 1 Nos of peg stay to each shutter, with glazing bars incl flat iron 12x3mm for securing Gauze/Glass,dovetailed or welded with one shop coat of zinc chromate primer complete all as specified

S/F Mild steel conforming to Fe-290-0 GdeE-165 complete. in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete.

Supply & Fixing 300 mm size MS door spring including roller and roller plate by means of welding complete all as directed by Engineer-in-Charge

Supply & Fixed in Repairs MS door spring of any size/any pattern including roller and roller plate by means of welding complete all as directed by Engineer-in-Charge

Supply and Fixing Stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and as directed.

Supply and Fixing in Repairs Stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including replacement of old damaged wooden bedding incl applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or fixed with wooden beads having area not exc, 0.50sqm in each pane complete all as specified.

S&F 4mm thick Pin Headed sheet glass and glazing with oil putty or fixed with wooden beads having area not exc, 0.50sqm in each pane complete all as specified.

Hacking out old broken glass from metal frame or wooden frames incl punching or drilling out old glazing pins/spring clips of any area

S & F mild steel butt hinges medium weight cold rolled ISI marked of size100mm complete all as specified and directed.

S & F mild steel butt hinges medium weight cold rolled ISI marked of size 75mm complete all as specified and directed.

S & F double leaged floor door stopper of over all length of cover plate 140 mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor all as specified

S & F in Repairs double leaged floor door stopper of over all length of cover plate 140 mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor all as specified

S&F hasp & staple 100mm size safety type, Brass with mild steel hinges pin including bolt of hinge plate & fixed with screw complete all as spd & directed.

S&F aluminium handle 125 mm size,cast type, anodised complete all as specified & directed.

S&F in Repairs aluminium handle 125 mm size,cast type, anodised complete all as specified & directed.

S & F aluminium anodized barrel tower bolt 150 mm long of extruded section complete all as specified & directed

S & F in Repairs aluminium anodized barrel tower bolt 150 mm long of extruded section complete all as specified & directed

S&F aluminium alloy anodised sliding door bolts 250mm with hasp, staple (bolt type) & fixing clip of sheet cast or extruded section & fixing bolt & sliding bolts of extruded section or cast aluminium alloy all as specified & directed.

S&F in Repairs aluminium alloy anodised sliding door bolts 250mm with hasp, staple (bolt type) & fixing clip of sheet cast or extruded section & fixing bolt & sliding bolts of extruded section or cast aluminium alloy all as spd & directed.

S&F in Repairs door seal strip with plastic beading complete all as specified and directed by Engineer-in-Charge. Make : BEETA.

Material and Labour Cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete.

Material and Labour for Preparing New surfaces of wood and wood based materials of any description over 10cm in width or girth and applying two coat of synthetic enamel paint Over one coat of Pink Primer complete.

Material and Labour for Preparing new or previously untreated steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over & including a coat of red oxide primer complete.

S&F aluminium anodized frame for door, windows, ventilators, partition walls of section 100mmx44mmx1.62mm with one or more rebates including joining cleats for fixing necessary lugs frame work complete all as specified and directed by Engr-in-Charge.

M&L for anodised aluminium door shutters single/double leaf, side hung type, with top rail of size 44.45X101.60X1.60mm thick, bottom & lock rail 44.45X101.60X1.60mm thick styles/meeting styles shall be of size 44.45X85X1.60mm thick including jointing cleats, rubber beading snap fit clips, aluminium screws etc, panels fitted with prelaminated particle board/glass including builders hardware ie aluminium tower bolt 150mm long 2 nos to each shutter , aluminium door handle 150mm long 2 nos to each shutter, and mortice lock 100 mm size 6 levers complete all as specified.(Prelaminated board and glass to be measured & paid separately).

Supply and fixing aluminium anodised window.ventilator shutters, side hung type without sash bars, aluminium secton of size 83.85mm x 44.45mmx1.6mm thick including necessary jointing cleats glazing clips, rubber packing aluminium anodised snap beading, screw, aluminium beadings such as peg stay 150mm long-01 No, Aluminium handle size 100mm -01 No hinges type B-21, 100mm long (2 Nos) on each shutter to be fitted with glass panes etc complete all as specified and as directed. (Note :- Glass panes to be measured & paid separately.

S&F anodised aluminium grills,7.5mm wide ,6mm thick fixed to aluminium windows/partitions/door frames including all fixing arrangements like aluminium channels, screws etc complete all as specified & directed by Engr-in-charge.

S&F plain sheet glass, ordinary quality 4.8mm thick in panels of aluminium doors/windows/partitions fixed with aluminium glazing clips & rubber beading complete all as specified.

S&F double action floor spring for aluminium door shutters fixed in repairs all as specified.

S&F in repairs hydraulic door closer of aluminium fixed to door shutters of designation 2 all as specified.

Supply and fixing, drapery rod of mild steel 25mm dia, ribbed/fancy type, PVC powder coated, any shade, including set of fixing brackets, for span not exceeding 2m, fixed to wall in repairs, with PVC finols/funnels, connected accessories, rubber packing, required screws and PVC rawal plugs as required complete all as specified and as directed.

Material and Labour for Welding in repairs not exceeding 2.5cm in length (thickness of metal to be welded not exceeding 6mm) including cleaning preparing the surface and holding the members in true position for maintenance of steel items such as gates, grills, doors, windows etc., complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins arches pillars all as specified.

Material and Labour for brick work sub class “B” bricks straight or curved in plan exc. 6mtr mean radius with old size bricks in CM 1:6 complete all as specified.

Material and Labour for brick work sub class “B” bricks straight or curved in plan exc. 6mtr mean radius with old size bricks in CM 1:6 except brick complete all as specified.

Taking down cement plaster including racking out joints hacking for key scrubbing down with water complete all as specified.

M/L for Rendering 15mm thick in cement mortar 1: 6 on faces of brick work or concrete surfaces,finished even and fair without using extra cement complete.

M/L for Rendering 15mm thick in cement mortar 1: 4 on faces of brick work or concrete surfaces,finished even and smooth without using extra cement complete.

Preparation of new wall surfaces plastered or unplastered and applying three coats of white, complete all as specified and directed.

Preparation of new plastered surface and applying two coats of cement base paint on walls , complete all as specified and directed.

Demolition of cement concrete as in ground floors and in paving not exc 15cm thick below or above ground level all as specified.

M/LCement concrete 1:5:10 type E-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors complete.

Material and Labour Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, 50mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc, laid beded and pointed in any mortar

Dismantling floor, hearth or wall tiling, terrazzo toping/ dado, including cement mortar bedding/backing and removing rubbish off the premises of MoD land, including preparation of dismantled surface area to receive backing coat/bedding layer for tiles, complete all as specified and directed.

S/F Vitrified Ceramic tiles Light shade 10mm thick( square/rectangle) Polished area of each tile not exceeding 0.36sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over 15mm thick screed bed of cement mortar 1:6 complete.

M/L Glazed ceramic coloured tiles in vertical surface 300mm x 450mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over 10mm thick cement plaster of cement mortar 1:3 and making the surface rough to receive the tiles complete.

M/L Non skid joint free coloured ceramic tiles 7 to8mm thick ( square/rectangle) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm,in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over 15mm thick screed bed of cement mortar 1:6 complete.

M/L machine cut Kota stone slab flooring 20-25 mm thick over 15mm thick screed bed of cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M/LKota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar, laid over 10mm thick cement plaster of cement mortar 1:3 and making the surface rough to receive the tiles and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.

25 mm thick plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in sub base for flooring complete, all as specified.

Demolition of mud phuska on roofs any thickness including mud plastering (whether full thickness removed or only a part thereof) and removal to a distance exceeding 100 metre, complete all as specified

Dismantaling brick tiles or terracing tiles single layer in roof complete.

Taking down existing water proofing treatment and existing bituminous coating and cleaning the surface and washing down with water and roughening the surface and removing the rubbish off the premises to a distance exeeding 150 mtr and n. exc 250 mtr all as specified

Material & labour cutting out cracks to V section in existing RCC roof slab or terracing, cleaning out wetting grouting with cement and sand slurry in cement mortar (1:3), complete all as specified.

Material & labour plain cement concrete (1:2:4) type B-1, using 20 mm graded mechanically crushed stone aggregates as in,roof kerb ,padding to roof to maintain the required slope and finished the surface rough to receive the top layer, complete all as specified.

Material & labour cutting groove in brick wall 75 mm wide and 65 mm deep for inserting APP polymer membrane and shaping horizontal face of groove with cement mortar 1:3, including removal of rubbish outside MoD land, complete all as specified.

Material and labour, 10mm thick cement plaster in CM (1:4) mixed with WPC as per manufacturer’s instructions @ 3% by weight of cement on concrete surfaces, finished even and smooth without using extra cement, after applying neat cement slurry @ 3Kg/Sqm, including wire brushing, cleaning, washing and preparing roof surface, complete all as specified and directed. Note : WPC shall be measured and paid separately

Cleanig the new or old plastered concretre surfaces and applying a coat of primer @ 0.30 litre/ Sq. m and applying a layer of APP based polymeric membrane 3mm thick weighing not less than 3.60 Kg/ Sq.m reinforced with non wovenpolyester with 100 mm side lap and 150mm end over with LPG torch flame application, complete all as specified and directed.

Material & labour, 40 mm thick brick tiles laid on roof and including 15 mm thick screed bed in CM (1:6) and jointed grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement over and complete all as specified and directed.

-Ditto- all as per item No 76 above but except brick tiles.

S/F PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls, 110mm double socketed

S/F PVC (SWR) bend 110 mm

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessoriesr

Demolition wall and ceiling boards (fibre pulm, insulation etc )or insulation board/slabs/blanket, any thickness including cover fillets

False ceiling at all heights of 600 mmx600 mm x16 mm mineral fibre ceiling tiles of type classic lite RH-99 fine texture of 'Amstrong' laid on exposed grid system . The frame work comprises of main runner spaced at 1200mm maximum (centre to centre) . Hangers (GI wire of 4.0mm dia) to be fixed by approved roof plug , level ajdusters and screws etc. The last hanger at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200 mm long croos tess ( with double stiching ) to be interlocked between main runner at 600mm shall be 'T' shape section with single rotary stiching made of GS sheet and of size 15mm x32mm and 3000 mm long , crossed runner shall be 'T' shaped with double rotary stiching made of GS sheet and size 15mm x32x 1200mm long and perimter wall and angle shall be made from GS sheet and of size 19mm xand 3000mm long, colour , white center to form 1200mmx 600mm modules, cut cross tess longer than 600mm to be supported independently, 600mm x 600mm modules to be formed by fitting 600mm long flush fitting cross tess centrally between the 1200mm cross tess. Perimeter trim to be wall angle secured to walls at 450mm maximimum (centre to centre), PVC clips to hold the ceiling tile, complete all as specified.

S&F False ceiling at all heights of 600 mmx600 mm x16 mm mineral fibre ceiling tiles of type classic lite RH-99 fine texture of 'Amstrong' laid on exposed grid system .

Dismantling of timber scantling under40sqcm framed work for rafter purlin etc in any position

S/F roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. FE -290 Gde E-165

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings , complete all as specified and directed.

PCC (1:3:6), type C-2, using 40 mm graded mechanically crushed stone aggregates as in foundations, filling and mass concrete , hard standing etc., complete all as specified.

S & F Prepainted galvalume aluminum zinc coating GI based ,corrugated steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self tapping screws complete, all as specified and directed as in repair.

Taking up or down steel water tubing and connection including cleaning for refixing or removal to store of 15mm bore all as specified.

Taking up or down steel water tubing and connection including cleaning for refixing or removal to store of 20mm bore all as specified.

M&L for GI tubing 15mm bore fixed to walls, ceilings or laid in floors medium grade all as specified.

M&L for G1 tubing 20mm bore fixed to walls, ceilings or laid in floors medium grade all as specified.

S&F in repair100mm dia ‘P’ or ‘S’ trap.

S & F in repair cast iron 100mm bore sand cast soil waste or vent pipe as in any length with or w/o ears with cement joints fixed to wall and laid in floor in complete.

S & F in repair cast iron 100mm bore sand cast soil waste or vent pipe as in any length with or w/o ears with cement joints fixed to wall and laid in floor in complete.

S & F in repair cast iron floor trap 75mm, incl 125mm dia CP grating incl jointing to waste pipe, fixed in cement concrete 1:2:4 complete.

S&F PVC connections 600mm long including back nuts and washers fixed to 15 mm bore of pipe fixed in repairs.

Wash basins, vitreous china coloured (flat back or angle back type) of size 450x400 mm , including cutting of and pinning in ends of brackets or erecting stand but including 15 mm CP pillar cock, CP waste coupling , PVC waste pipe, PVC connection etc, complete all as specified. (Fixed in repairs).

Vitreous china ware white wash down water closet pan (pedestal pattern) with plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminum hinging device (excluding flush pipe and flushing cistern) including connection to trap and to flush pipe anti syphonage pipe etc complete including making good to floor complete, all as specified and as directed .(Fixed in repairs)

S/F in Repairs Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60 gms) complete.

Vitreous china bowl urinal flat back sizeof 465x355x265mm white (minimum) with grating and union for discharge pipe complete including providing and fixing plugs,bedding, urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing 5 ltr CI automatic flushing cistern with brackets, flush pipe, gating and union for discharge pip complete, all as specified and as directed. (Fixed in repairs).

Vitreous china water closet (squatt pattern) squatting pan, 'Orrisa' pattern, size 580x440mm white, with integral foot rests with 'P' or 'S' trap (excluding flushing cistern and flush pipe) , complete all as specified. (Fixed in repairs).

PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity , low level, white, with inlet, ball valve, float and handle including brackets , complete all as specified.

Bib taps, CP cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe 15 mm dia size complete, all as specified and as directed.(Fixed in repairs).

15 mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or with out lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of size 15 mm dia , fancy type, complete all as specified.(Fixed in Repairs)

Stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union and fixed of 15 mm dia size, complete all as specified.(Fixed in Repairs

Stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union and fixed of 20 mm dia size, complete all as specified.(Fixed in Repairs)

15 mm dia stop valves, cast copper alloy chromium plated , concealed type with long shank and cap screwed down high pressure with crutch or butterfly handle for iron pipe or for union, complete all as specified and as directed. (Fixed in repairs).

S & F in repair stainless steel sink, 1.00mm thick for kitchen, with waste coupling, PVC waste pipe, washers, including, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x330mm x 160mm complete all as specified and as directed

S&F in Repairs PVC kitchen waste coupling/waste pipe with rubber warsar of design and pattern suit to existing waste couplings with and including 32mm PVC waste pipe heavy duty complete

S/F in Repairs Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete.

S/F in Repairs Waste coupling of PTMT 32 mm (half or full threaded) (Minimum weight 32mm-45gms complete

S/F in Repairs Pillars taps of PTMT any colour high pressure screwed for iron pipe of 15 mm bore fancy type (minimum weight 120 gms) complete.

S/F in Repairs Bib tap standard of PTMT any colour high pressure screwed for iron pipe of 15 mm bore (minimum weight 90 gms) complete.

S/F in Repairs Stop valve of PTMT any colour high pressure screwed for iron pipe of 15 mm bore (minimum weight 90 gms) complete.

Dismantling PVC water storage tank of capacity exceeding 250 litre but not exceeding 500 litre , complete all as specified and directed.

Rotational moulded PVC, double layered, water storage tanks of capacity 500 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple etc. but excluding ball valve , complete all as specified and directed.

S/F Ball brass valves, high pressure, with polythene float and fly nut, screwed for iron pipe or brass ferrule 20 mm bore complete.

Supply only integral water proofing compound , complete all as specified.

M&L for 20 TO 25 mm thick rendering in cement 1:3 on faces of concrete surface(edges of chajjas, roof, roof projectios and similar items) in two layers with finished surface even and smooth w/o using extra cement with and incl taking down broken surfaces of concrete and applying two coats of existing finishes and shade.( Double scaf folding and necessasry shuttering deems to be included in the rate)

M&L as in patch not exc 1 Sqm for 20 TO 25 mm thick rendering in cement 1:3 on faces of concrete surface(edges of chajjas, roof, roof projectios and similar items) in two layers with finished surface even and smooth w/o using extra cement with and incl taking down broken surfaces of concrete and applying two coats of existing finishes and shade.( Double scaf folding and necessasry shuttering deems to be included in the rate)

Material and labour for repair of edges of jambs cills and soffits of door window and other opening of width exc 5 cm and not exc 10 cm each side by taking down cement plaster and plastering the same with cement mortar 1:4 and make good with 2 coats of existing finishes complete all as specified and directed by Engineer-in-charge

M&L for preparation of old decorated plastered surfaces of walls by rubbing down,washing,& stopping of distempered surfaces and applying two coat of oil bound distemper (Ist quality) complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old decorated plastered surfaces of walls by rubbing down,washing,& stopping of distempered surfaces and applying one coat of oil bound distemper (Ist quality) complete all as specified and directed by Engineer-in-charge.

M&L for preparation of plastered or un-plastered old decorated surfaces of walls, cornices etc such as brooming down or steel wire brushing, scraping down smoke shoots, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of white wash on ceiling complete all as specified and directed by Engineer-in-charge.

M&L for preparation of plastered or un-plastered old decorated surfaces of walls, cornices etc such as brooming down or steel wire brushing, scraping down smoke shoots, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of cement base paint on wall complete all as specified and directed by Engineer-in-charge.

M & L for Preparation of old wooden surface, of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.

M & L for Preparation of old steel surface, of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old decorated plastered / Brick surfaces of by rubbing down and applying one coat of exterior grade acrylic emulsion alkali proof ( Ist quality) all as specified and as directed by Engineer-in-charge.

Preparing new steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint including a coat of red oxide primer complete.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete.

Taking down & refixing steel gate of any design or section Height up to 8 mtr & refixing the same to same opening after minor addition & alteration with and incl repair and providing 4 no heavy duty wheel and pintal hinges (box type heavy duty),with welding work and greashing tp make it functional

Taking down rolling shutters to carry out minor repair including bearing, shaft etc and greasing of size n exc 3.5 mtr height and refixing in the same opening , complete all as specified and directed.

Supply and fixing rolling shutter spring as per requirment nexc 3.5 mtr height , complete all as specified and directed.

Taking down rolling shutters minor repair and greasing exc 3.5 mtr height , Gear type and refixing in the same opening, complete all as specified and directed.

Supply and fixing rolling shutter spring as per requirment size, exc 3.5 mtr height , complete all as specified and directed.

S&F in Repairs Mortice lock 100mm vertical type complete all as specified and directed.

Material and labour, earthing complete with GI earth plate electrode of size 600mm x 600mm x 6mm thick buried directly in ground vertically (depth of pit not less than 2.25m below normal ground level), with top edge of earth plate not less than 1.5m below normal ground level, earth plate surrounded from all sides by 15cm thick packed alternate layers of charcoal dust and common salt, electrode connections using galvanized iron strip of size 32mm x 6mm thick (upto body of equipment) by means of nuts, bolts, check nuts & GI washers, connected to main switch board or main control board or test point, protected by galvanized iron pipe light grade 40mm dia bore and watering pipe 20mm dia bore GI medium grade with funnel & wire mesh including all necessary excavation & earth work PCC chamber in PCC (1:2:4) type B-1 & RCC cover, all as shown in electrical plate No 3 of MES Schedule Part-I (2009), testing on completion, complete all as specified and directed.

Material and labour, earthing complete with galvanized steel earth plate electrode of size 60mm x 60mm x 6.00mm thick, buried directly in ground vertically (depth of pit not less than 2.25m below normal ground level), with top edge of earth plate not less than 1.5m below normal ground level, earth plate surrounded by 15cm thick packed alternate layers of charcoal dust and common salt, connected with and including earth lead of GI wire 4mm dia (8 SWG) by means of bolts, nuts check nuts and washers of galvanized iron or thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm dia bore including watering pipe 20mm dia bore GI medium grade (ISI marked with of size 32mm x 6mm thick (upto body of equipment) by means of nuts, bolts, check nuts & GI washers, connected to main switch board or main control board or test point, protected by galvanized iron pipe light grade 40mm dia bore and watering pipe 20mm dia bore GI medium grade with funnel & wire mesh including all necessary excavation & earth work PCC chamber in PCC (1:2:4) type B-1 & RCC cover, all as shown in electrical plate No 3 of MES Schedule Part-I (2009), testing on completion, complete all as specified and directed.

Material & Labour for earthing kit, developed on concentric pipe technology concept with mild steel tubes, one inside the other hot dipped galvanized and filled with high conductive and crystalline conductive mixture. Backfill compound put around the electrode should retain moisture and should act as excellent ground enhancer. Earthing electrode 80mm with 3 meter long pure copper pipe with 50kg of back fill chemical earthing as per IS-3043, complete including dismantling of existing earthing, complete all as specified and directed. Make :- OBO, JMB,JMV, ENOV, Power track, Tirupati

Material and labour for GI strip 32x6mm as in earth continuity conductor, complete all as specified and directed.

Material and labour for GI strip 25x4mm as in earth continuity conductor, complete all as specified and directed.

Material and labour for aluminum strip 25x3mm as in earth continuity conductor, complete all as specified and directed

Material and labour for copper strip 20x3.15mm as in earth continuity conductor, complete all as specified and directed.

Material and labour for test point made out of copper strip 32x6mm, 200mm long – 02 Nos and 12mm dia brass nuts bolts 40mm long- 03 Nos, complete all as specified and directed.28

Material and labour for test point made out of GI strip 50x6mm, 200mm long – 02 Nos and 12mm dia GI nuts bolts 40mm long- 03 Nos, complete all as specified and directed.

Material and labour, air termination, single pointed aluminum rod 12mm dia and 300mm long fixed with GI pipe bracket, complete all as specified and directed.

Supply and fixing factory made box type steel section window, fixed type without glazing bars and with one shop coat of zinc chromate primer complete all as specified and directed.

Note:- Amount of credit of Rs.74605.00 for retrieved materials is mentioned in Schedule of Credit Page No 113 & 114 of tender documents in pdf form which will be deducted offline while acceptance of tender

M/S V K Construction Co

HARISH SALES CORPORATION