16/EE/DIV/IND/2023-24

Amount

Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Extra for cutting reinforcement bars manually / by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer in-charge.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :

(a) 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for :

(a) Columns, Pillars, Piers, Abutments, Posts and Struts

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels.

(a) Thermo-Mechanically Treated bars of grade Fe-500D or more.

Steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

(a) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and fixing bolts including nuts and washers complete.

Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand).

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).

Disposal of dismantled RCC materials by mechanical means from the site to out side the village boundary i/c loading unloading and transportation charges.

Dismantling and dismembering of 40M high ground based tower and MARR tower and stacking of tower members within lead of 50 mtr. including stacking, sorting & numbering of all material i/c all fasteners, mounts, base plate, platforms, ladder, vertical cable tray, anteena, RF cable, electrical cable etc. all complete as per direction of ingineer in charge. Note:- The rate of this item shall include the cost of all labour, T&P other equipments etc. required for all operations specified above including scaffolding, saftey measures, belts, insurance of labour etc. The rate includes all the above operations and nothing extra shall be paid.

Sorting of structural steel members of tower size wise as per standard drawing inside the store yard after un-loading and stacking the same for measurements within the lead of 100 metres and placing the nuts / bolts in Poly bags as directed by the Engineer in Charge.

Labour charges for hoisting, fixing and erection of 100 mm diameter and 9.00 metre high poles arrangement (three pipes of 3.00 meter height / length in each column) with all its necessary components i.e. climbing ladder and fixing with bolts, nuts and spring washers and all safety measures. The job shall include necessary welding and cost of scaffolding etc. wherever required all complete in all respect as per direction of the Engineer-in-charge. (The payment of steel structural works, nut, bolts and washers etc. will be paid separately) (The poles are to be supplied by the department from the store of the BA)

Painting with LUXOL high gloss synthetic enamel paint or equivalent in two or more coats over and including base coats of etching primer (BISON wash primer or equivalent) and BISON HB Zinc phosphate primer or equivalent to required shade and colour. (The colour of painting shall be of international white and orange). The painting should be done in accordance with IS standard.

Transportation charges by mechanical transport of 100 mm dia MS pipes (9 Nos x 3.00 meter each) from Ujjain / Shajapur BSNL store to Kanad i/c loading, unloading and lifting charges upto all levels) etc. all complete as per direction of E in C.

Transportation of dismantled tower material (of One 40 metre tower and MARR tower) from the specified site at Kanad to the Telecom stores yard at Ujjain/Shajapur by mechanical transport including loading , unloading, stacking, watch and ward etc. complete as per direction of Engineer-in-Charge.

(a) Lead up to 50 Kms.

Credit of tor steel / TMT bars recovered from RCC work

Kanchan raj construction