ZILA PANCHAYAT KARYALAY ME FALSE CEILING, PANNELING EVAM ANYA KARYA

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping groundwithin 50 metres lead.

12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 fine sand.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work

Painting or varnishing new iron work in small areas or new wood with one coat (up ton one sq. meter ) of ready mixed priming paint and one coat of approved superior quality ready mix paing (2n quality synthetic enamel paint of approved brand such as British paint, Shalimar, Asian or equivalent as approved by E/I) or Varnish including supply of all materials, labour, T&P etc. required for proper completion of the work. Paint to be used should confirm the I.S.I. No. 103-1950. S.I. No.641

Providing and fixing false ceiling at all height, including providing and fixing of framework made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive), as per specifications and drawing, with 24 mm wide T-section exposed flanges having 0.33 mm thick web and 0.50 mm thick flanges of mild steel zinc coated and the ceiling system laid on hangers fixed with GI cleats and steel expansion fasteners, including 12 mm thick mineral fibre ceiling tiles of approved texture, design and shade, laid in grid, complete as per direction of Engineer-in-Charge.

supply and fixing of electric wiring with wall fan and light and switch board, complete as per direction of Engineer-in-Charge

Providing and fixing PVC wall panneling of low quality to provide the base surface for BWR wooden panneling, complete as per direction of Engineer-in-Charge

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections appropriate z section and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasterners of required dia and size, including necessary filling up the gaps at junctions. i.e. at top, bottom and sides with required EPDM rubber neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing paneling, C.P. brass stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion:21.1.1.1 - Anodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, minimum anodic coating of grade AC 15)

Providing and fixing fly proof wire gauze to windows,clerestore window and door with M.S. flat 15x3mm and nut and bolts complete:10.29.2 stainless steel wire guaze of 0.5 mm dia wire and 1.4mm aperture on both sides.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubbers/ neoprene gasket etc. complete as per the architectural drawings and the direction of engineers incharge . (cost of aluminium snap beading shall be paid in basic items) : 21.3.2 with float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)

Providing and fixing 19 mm thick BWR grade plywood panelling with decorative laminated sheet on exposed side, fixed on wooden frame / aluminium framework, including necessary adhesive, nails, screws, edge beading and polishing of unexposed surface, complete as per direction of Engineer-in-Charge

supply and fixing of all sanitary fitting , complete as per direction of Engineer-in-Charge

Supply and installation of LOGO of lettering to designate the office name.

Please Enable Macros to View BoQ information