Ranipet District, Kaveripakkam Town Panchayat,SBM 2.0 2024-2025 Scheme

Amount

Dismanling of exsisting Pcc wall including cost and conveyance of materials to work site & labour charges complete with standard specifications

Earthwork excavation in all soils and subsoils except hard rock requiring blasting with initial lead and lift as initial lead of 10.0 m and lift 0f 2.00 m including re-filling the sides of foundation in layer of 15cm. thick watering ramming depositing the surplus earth in the premises as directed by the departmental officers etc., complete complying with standard specification.

Plain Cement concrete 1:4:8 (One cement Four sand and Eighte aggregate ) using 40mm ISS size hard broken granite metal for foundation and flooring including de-watering wherever necessary and laid in layers not more than 15cm. thick to required thickness , including cost and conveyance of materials to work site & labour charges complete with standard specifications

Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86.

Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3.

Reinforced Cement Concrete 1:1½:3 Mix (One Part of cement, one and half Part of M- Sand and three Part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications. TNDSS NO: 30 V, VI (S3), VII-3.

Plain Cement Concrete 1:2:4 Mix (one Part of cement, two Part of M- Sand and four Part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

Brick Work in Cement Mortor 1:5 Mix (one cement, five M- Sand) using new best II Class Bricks of size 9 ” x 4 3/8 “x 2 3/4 ” from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.(For 10 M3)

Plastering in Cement Mortor 1:5 Mix (one cement, five M- Sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Plastering in Cement Mortar 1:3 Mix (one Cement, Three M- Sand ) 20mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications

Supplying and fixing RCC Pre cast50mm thick slab in RCC 1:1 1/2:3 mix including cost of reinforcement grill but including moduling, finishing watering curing and fixing in position etc., Complete as per std., Specifications.,

Supplying and fixing in position best white glazed earthenware INDIAN WATER CLOSET with "P" and "S" trap with double flapped sheet cover with brace hinges and 10 Liter capavity PVC low level flushing tank with all internal fittings in position with 40mm brick jelly concrete 1:2:5 mix (one lime, two sand and five brick jelly) and finishing the top with a required slope and incluiding giving connection to the AC soil straks by dismantling the masonry floor or RCC works and rejoining the same to the original condition without any leakage etc., complete as directed by the departmental officers.

Supplying and fixing RCC jally including cost of reinforcement grill but including moduling, finishing watering curing and fixing in position etc., Complete as per std., Specifications.,

Dadooing the walls with glazed tiles of 30 c.m x 20 c.m 6mm size laid in cement mortor 1:2 mix 10mm thick and pointing with 0.40 kg white cement per m2 etc.

Supplying and fixing over the floors best quality of scratch ceramic tiles of 30 c.m x 30c.m x 6mm size of approved colour laying with cement mortor 1:3 mix pointing the joints with colour pigments etc. Complete.

Fabricating, supplying and fixing in positon of SOLID PVC DOORS with frames of different sizes as per the specifications given below: PVC door frames made out of best quality PVC extruded section of 40mm * 58 mm * 2.50 mm +/- 0.3 mm thick, having multichamber cross section and duly reinforced with steel to be mitre cut at the corners and welded including providing tie rod at the bottom and necessary weather seal etc., and PVC door shutters made out of extruded plastic section of 60 mm * 24 mm size in the configruation of an "A" section for shutter frames and multi-chamber hollow plastic section of 200 mm *200 mm*1 mm (average thickness) with tongue and groove section for panels etc., with necessary holdfasts, rubber beedings, furniture fittings, locking arrangements etc., complete including dimantling the masnery, making chippings, holes in the RCC column, beam etc., wherever necessary with power drill to the extent required and redoing the same to the original condition after fixing etc., complete as per specifications and as directed by the departmental officers.

Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm

Painting Two Coats on new Iron works with best synthetic enamel paint of approved colour and quality – 10m2.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch withpainting of suitable colour for open PVC light point SD-20

Supply and fixing of 7/9 Watts LED (Like OSRAM,PHILIPS Etc) Including all charges as Directed by the Departmental Officers Etc,Complete,

Supply and fixing of 24 watts L Angle pipe lamp fitting conveyance of materials to work site & labour charges complete with standard specifications

Supplying and fixing in position best Indian make white glazed earthenware WASH HAND BASIN of 560x406mm with a a pair of C.I. Brackets, 15mm dia C.P. Pillar tap, 32mm G.I. Waster water pipe, 32mm dia C.P. Brass waster coupling, plug with chain, 15mm dia PVC connection, 15mm G.M. wheel valve with ISI mark and necessary G.I. union and G.I. Elbow, including fixing wash hand basin in position with white lead, clamps, teakwood plugs, screws, rubber washer etc., complete without any leakage complying with standard specifications.

Supply and fixing of Face mirror fitting conveyance of materials to work site & labour charges complete with standard specifications

Supply and fixing of water tap fitting conveyance of materials to work site & labour charges complete with standard specifications

Supply and fixing of Towel rod fitting conveyance of materials to work site & labour charges complete with standard specifications

Supply and fixing of bath room soap tray fitting conveyance of materials to work site & labour charges complete with standard specifications

7/20 service wire

25mm Pvc pipe

110mm pvc pipe

110mm pvc Elbow

110mm pvc Tee

Conduction geophysical survey quality and quantity test an transportation charges etc., (Rate as adopted by TWAD board)

Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs, fuel, labour and drilling bentonite and water required for drilling at site ( Site will be shown by the TWAD Board Officers)

Supply and fixing of200 mm dia PVC casing pipe as IS 12818/1992 Including cost and conveyance to the site etc. completeTWAD SOR P{39)

Labour Charges for inserting PVC Casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC Couplers with Cement paste etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the executive engineers of TWAD Board

Supply and delivery of Single phase submersible pump set suitable 150mm dia Borewell with ISI mark IS 8034 Without pannel board of 20 lpm x 100m head etc complete

Supply and delivery of Single phase pannel board suitable for 2.HP submersible motor with DOL with two level guard and auto start etc. complete

Supplying and Delivery and Fixing of 1000liter Capacity H.D.P.E tank as per IS No: 12701/1996 Including Loading And Unloading Charges For Fixing of G.I Pipes and Specials for Pipe Connection works Including Cutting Therding and Fixing Charges etc Complete As per Std Speciations.

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,

Supply and delivery of following GI pipes and specials confirming to IS 554/86 GI pipes IS 1239/1990 part I required

a. 32 mm GI pipe medium (B class)

b. 32 mm PVC pipe

c. 32mm GI Bend

d. 32mmGI Flange set

e.32 mm MS clamp set

f. 32mm GM Non- return valve

g. 32 mm GI coupling

f. 32 mm GM Gate valve

h. 2.5 sqm flat copper submersible cable

i. Fuse carrier 32A, 415V

j. Isolater 4p, 40A, 415v

Nylone rope

Labour charges for the erection of up to 2HP submersible pump set in the deep bore well including fixing and jointing submersible cable with Proper clamps upt to the starter to required depth and also fixing of riser pipes, valves erection, erection of Panel board consisting of TPICN switches and laying & jointing the cables and twin earthing asper IE rules, etc complete.

Painting the walls with two coats of exterior plastic emulsion paint over base coat as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications.