SPECIAL REPAIRS TO BUILDING NO. P-111 AT AF STATION DEOLALI

Amount

(A)B/R ITEMS INCLUDING AREA DRAINAGE AND COMPOUND WALL, FENCING & GATE Taking down chowkats or frame with shutters (without taking off shutters from the frame ) n.exc. 1.5 sqm each complete all as specified and as directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame ) exc. 1.5 sqm but n.exc. 4.0 sqm each complete all as specified and as directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame ) exc. 4.0 sqm but n.exc. 10.0 sqm each complete all as specified and as directed.

Supply and fix pressed steel frame made out of 1.25 mm thick M S sheet and of size 105 x 60 mm for doors/ windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., and filling with PCC 1:3:6,type C-0 using 12.5 mm graded stone aggregate and painting with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete, as specified and directed.

Supply and fix 2nd class hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed.

Supply and fix 2nd class hard wood 35 mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated and fitted to chowkats all as specified and directed.

Supply & fix factory made solid panel PVC door frame of size 50mm x 47mm made out of 5mm thick wood grain printed PVC sheet & edges to printed to match with printed sheet, reinforced with MS Square tube, complete all as specified and directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing and all as directed.

Supply & fix rolled steel sections conforming to Fe-290 (Gde E165) as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etall as specified and directed.

Material and labour for expanded metal exceeding 4.0 kg per sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members all as specified.

Material and labour for 18 to 19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in kitchen cabinet and similar locations all as specified and directed.

Supply and fix aluminium powder coated sections (min. thickness of powder coating 50 micron) as in frames and other members of doors and windows/ventilators/Partition walls/fixed type window etc of size as approved and fixed all as specified and directed Note : (i) Paneling such as glass , Gauge etc will be measured and paid saperately.(ii) The rate quoted under this item shall be deemed to include for necessary jointing cleates, glazing clips, alluminium beading, screws, rubber packing and locking devices & in built handles for sliding windows. However, no element on account of weight will be taken into consideration for these item.(iii) Floor door spring/locks/tower bolts/ handles/ door closure/hinges for doors measured saparately.(iv) Size of door / windows shall be all as directed at site.(v) Grills will be measured saparately.(vi) Second class hard wood batten of appropriate size to be inserted inside the frame for fixing hinges and the same is included in the rate quoted.

Supply and fix anodized aluminium sliding window two/three (Bombay sliding window) made out of hollow extruded aluminium section as mentioned below and glazed with tinted glass 4mm thick fixed with glazing clips, rubber beding/gasket anodized aluminium beading screws and star lock type handles of size 75mm 2 Nos aluminium tower bolt 150mm long etc complete all as specified and directed with the following sizes:- (a) Shutter & bottom size 37.5x15x1.60mm thick & 40x18x1.09 mm thick (b) Shutter inner lock size 37.50x15x1.60mm thick, 40x18x1.00 mm thick (c) Shutter side (handle) size 37.50x15x1.36mm, 40x18x1.09 mm thick (d) Chowkhat bottom size 50.30x26x1.00mm, 92x31.75x1.10 mm thick (e) Chowkhat top & sides size 50.30x15x1.00mm, 92x31.75x1.05 mm thick Note : One window in each bedroom should be made with provn of AC opening with top hung shutter fixing with hinge and fixing of aluminium grill all as directed .

Supply and fix 10-12mm thick frosted toughened glass door with logo of Air Force and name as specified and directed with two nos of stainless steel handles for each shutter, 250mm long of decorative quality, floor spring of heavy duty in each shutter alongwith all fitting and fixtures and locking arrangements of approved make all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges all as specified and directed .

Supply and fix pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick (TCT) of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and directed.

Supply and fix pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick (TCT) of in ridge any colour having tensile strength of 550 Mpa as in ridge with self tapping screws complete all as specified and directed.

Supply and fix pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick (TCT) of in ridge any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip and straight flashing including cutting and bending to required shape and welding and fixed with self tapping screws complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

Material and Labour for anodised aluminium snap grid of size 605x605 mm frame work for false ceiling with aluminium angles of size 23.5 x 23.5 x 1.5mm fixed to wall with GI screws and aluminium tee section of size 37.5 x 37.5 x 1.5mm in main and cross runners fixed 60 cm c/c and tied to existing roof/truss/rafters with and including 4 mm dia GI wire of required length @ 1.2mc/c complete all as specified and directed

Taking down eaves gutters and rain water pipes any dia and pattern, including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accesso complete all as specified and directed.

Supply and fix PVC (SWR) pipe 110mm bore of pipe waste and vent pipes etc.,single socket in any length with rubber ring joint, fixed to walls and floor all as specified and directed.

Supply and fix mild steel framed work such as grills, gratings door chowkats etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0all as specified and directed.

Material and labour for collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc all as directed.

Supply and fix steel work in tubular trusses, purlins and similar work including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161,1979 grade St-240 all as specified and directed.

Supply and fix rolled steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment steel conforming Fe 410 -W (Gde E- 250) quality A all as specified and directed.

Material and labour for mild steel as in wind ties, hold fast and brackets for holding boarding etc., posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer on steel based surfaces exc. 10cm width or girth including preparation of new or previously untreated surfaces all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer on steel based surfaces not exc. 10cm width or girth including preparation of new or previously untreated surfaces all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint on steel based surfaces exc. 10cm width or girth including preparation of old surfaces all as specified and directed.

Material and labour for applying one coat of synthetic enamel paint on steel based surfaces exc. 10cm width or girth including preparation of old surfaces all as specified and directed.

Material and labour for applying one coat of synthetic enamel paint on steel based surfaces not exc. 10cm width or girth including preparation of old surfaces all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint over a coat of pink primer on wood/ wood based steel surfaces of any description over 10 cm width or girth including preparation of new surfaces all as specified.

Material and labour for applying two coats of synthetic enamel paint on steel based surfaces exc. 10cm width or girth including preparation of old surfaces all as specified and directed.

Supply and fix brass mortice lock 4 lever vertical type 100 mm size all as directed.

Supply and fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, orstainless steel wire staples all as specified & directed.

Supply and fix aluminium (extruded aluminium section body) Door closer hydraulically regulated,designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight 61 to 80 kg complete all as specified and as directed

Supply and fix double action floor door stopper/spring hydraulically regulated made up of minium 1.25 mm thick aluminium alloy sheet foundation bore, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty as in fixed including taking down and refixing aluminium shutter in the same opening.all as specified and as directed.

Supply and fix Continuous (piano) hinges, mild steel, bright finish or electrogalvanished(Width of flap 30 mm) all as specified and directed.

Supply and fix 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified and directed.

Supply and fix 100 mm long cold rolled mild steel Butt hinges, medium weight, cold rolled and fixed all as specified and directed.

Supply and fix for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed all as specified and directed.

Supply and fix 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified and directed.

Supply and fix aluminium wardrobe hook (Single) 50 mm to 60 mm all as specified and directed.

Supply and fix 100 mm long hasp and staple , mild steel , wire type stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply only pre -coated fancy type mild steel drapery rod as approved 28mm dia fixed with fancy type matching pair of brackets fixed with screw all as specified and directed. Note : Brackets will be measured seprately..

Supply and fix fancy type brackets suitable for 28 mm dia pre-coated drapery rod all as approved and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc all as directed.

Material and labour for brick work by using sub class 'B' bricks obtained by demolition vide item no. 49 above, straight or curved on plan to any radius, built in cement mortar 1:6 all as specified

Material and labour for brick work with old size fly ash bricks straight or curved on plan to any radius, built in cement mortar 1:6 all as specified.

Material and labour for brick work with fly ash old size bricks, straight or curved on plan to any radius in half brick thick walls,built in CM (1:4) all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water etc all as specified and as directed.

Material & labour for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

Material & labour for rendering 5mm thick in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement all as specified and as directed.

Material & labour for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

Material & labour for rendering or plastering work 10mm thick in CM 1:3 on fascia / edging / ceiling of chajjas / roof projections etc, including taking out peeled off plaster / concrete and making the line in true shape and finishing the surface without using extra cement all as specified and as directed.

Material & labour for rendering 15mm thick in cement mortar 1:4 on other than fair faces of brick work or stone masonry surfaces finished even and smooth without using extra cement all as specified and as directed.

Material and labour for applying two coats of cement based paint over a coat of alkali resistant primer over newly plastered surface of walls and chajjas including preparation of surfaces complete all as specified and as directed.

Material and labour for preparing new /old wall surface including making surface clean, dry and free from any loose paint film, dirt, chalk, grease, fungus and algae and applying two coats of acrylic antifungal emulsion exterior weather proof paint on external surfaces, complete all as specified.

Material and labour for preparation of newly plastered surface on wall and applying two coats of distemper oil emulsion over one coat of wall care putty of not less than 2.0 mm thick including preparation of surfaces complete all as specified and directed.

Material and labour for applying three coats of white wash over newly plastered surface of ceiling including preparation of surfaces complete all as specified and as directed.

All as per item no. 63 here in before but on walls.

Material and labour for complete removal of existing treatment and applying two coats of distemper oil emulsion over one coat of wall care putty of not less than 2.0 mm thick including preparation of surfaces of old plastered surfaces of wall complete all as specified and directed.

Material and labour for complete removal of existing treatment and applying two coats of cement based paint over a coat of alkali resistant primer over old plastered surface of walls including preparation of surfaces complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar all as directed.

Demolition of reinforced cement concrete (reinforcement shall be cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings (below or above ground level) not exceeding 15 cm thickness complete all as specified and as directed.

Material and labour for 75mm thick PCC 1:3:6 mix type C1using 20 mm graded stone aggregate as in plinth protection and surface to be finished fair and even including joints at every 2.5 m and at all corners filled with 85/25 grade bitume and sand mixed in 1:2 ratio by weight complete all as specified and as directed.

Material and labour for 150mm thick PCC 1:4:8, type D-2 using 40 mm graded stone aggregate as in sub base of floor all as specified and as directed.

Material and labour plain cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate 40 mm thick as in floor topping finished fair and even complete all as specified.

Material and labour for glass dividing strips, 38 mm wide and 3mm thick and inserted in position all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer on concrete surfaces exc. 10cm width or girth including preparation of new or previously untreated surfaces all as specified and directed.

Material and labour for 75 mm thick PCC 1:4:8, type D-2 using 40 mm graded stone aggregate as in sub base of floor all as specified and as directed.

Material and labour plain cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate 25 mm thick as in floor topping finished fair and even complete all as specified.

Material and labour for coloured (light shade) vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles n. exc 0.36 Sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match and the shade of the tiles including 15mm screed bed or bedding layer in CM 1 : 6 all as specified and directed.

All as per item no. 77 here in before but of dark shade as approved.

Material and labour for coloured (light shade) vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles n. exc 0.36 Sqm in skirting/ vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match and the shade of the tiles including 10mm screed bed or bedding layer in CM 1:4 all as specified and directed.

Material and labour for joint free non-skid ceramic coloured tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11 sqm but not exc. 0.18sqm , laid in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match with over and including cement mortar screed of 15mm thick in CM 1:6 all as specified and directed.

Material and labour for joint free non-skid ceramic coloured tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11 sqm but not exc. 0.18 sqm , as in skirting / dado/ risers of steps set and jointed in neat cement slurry and pointed in white or coloured cement to match with over and including cement mortar screed of 10mm thick in CM 1:4 all as specified and directed.

Material and labour for glazed ceramic coloured tiles (diital printed design) of size 450x300x7 mm on vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with and over and including 10 mm thick screed bed in CM 1:4 including dismantling of floor hearth tiles etc., and disposing off rubbish from site all as specified and directed.

Material and labour for sand (dry)as in filling of under layer of paving including watering and compacting all as specified all as specified and as directed.

Material and labour for machine pressed precast prepolished concrete interlocking paver block any shape /pattern and size with pointed with grey cement and no pigments conforming to IS 15658-2006 of 60mm thickness M-35 grade all as specified and as directed.

Material and labour for machine cut kota stone in flooring 18-20 mm thick (Pre-mirror polished), over and including 20 mm thick cement screed base in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the floor including rubbing and polishing complete and moulding at edge if required all as specified and directed.

Material and labour for 18-20 mm thick Kota stone tiles (Pre-mirror polished), in riser of steps, skirting,dado etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles including rounding the edges of kota stone over and including 10mm thick backing coat in cement mortar (1:4), surfaces finished even and rough to receive tiles, all as specified and directed.

Material and labour for 20 mm thick Granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills, cooking platforms & like in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite over 15 mm thick cement screed/rendering in CM 1:4 including roughening surfaces of old/new concrete floor/wall by picking, sweeping clean and washing down with water to remove dust etc., and brushing neat cement slurry with 3.00 kg per sqm all as specified and directed.

Material and labour for chamfering, splays or arris in firework for cudappah stone not exceeding 15mm wide complete all as specified and directed.

Material and labour for cutting opening in cement concrete/ brick/ stone walls (any description/ any size without reinforcement for door, window and other openings (with or without reveals) or enlarging existing openings, including trimming surfaces and filling uop/ making good surface with PCC 1:2:4, type B0 complete etc., all as specified and as directed.

Material and labour for cutting channels, grooves or rebates n. exc 15cm girth, and trimming surface all as specified and directed.

Material and labour for reinforced cement concrete type B1 (1:2:4) nominal mix using 20 mm graded broken stone aggregate as in beam, bands, cantilevers, bressumers, lintels over 1.5 m span etc., all as specified and as directed.

Material and labour for reinforced cement concrete type B1 (1:2:4) nominal mix using 20 mm graded broken stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, shelves and the like all as specified and as directed.

Material and labour for reinforced cement concrete type B1 (1:2:4) nominal mix using 20 mm graded broken stone aggregate as in chajja all as specified and as directed.

Use and waste of formwork to sides and soffits of floor/roof beams , shelves including supports for fair finished surface of concrete,all as specified & directed.

Use and waste of form work to chullah hoods, chajjas, troughs and similar items including edges (flat) for a rough finished surfaces all as specified and directed.

Supply and fix mild steel TMT bar of 10 mm dia and over cut length bent to shape required including cranking and binding with mild steel annealed wire not less than 0.9 mm dia complete all as directed.

All as per item no. 97 here in before but of 6 to 8 mm dia bars as in stirrups, spacers etc.,

Taking up or down steel water tubing including connections 15 mm bore all as specified and as directed.

All as per item no. 99 here in before but of 25 mm dia pipes.

Supply & fix Galvanised iron water tubes 15mm bore medium grade with and including all fittings(ISI marked) complete and fixed to walls and ceiling or laid in floors all as specified and as directed.

Material & labour for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing and making good cutting not exc 10 cm girth complete all as specified and as directed.

Supply & fix Galvanised iron water tubes 25mm bore medium grade with and including all fittings(ISI marked) complete and fixed to walls and ceiling or laid in floors all as specified and as directed.

Supply and fix bib tap in repairs of 15 mm bore, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of approved make and all as directed.

Supply and fix stop cock in repairs of 15 mm bore, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of approved make and all as directed.

Supply and fix sinks with drainage board made of 1mm thick stainless steel sheet for kitchen or laboratery with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fix in repairs vitreous china wash hand basin, of approved colour, flat back of size 550 x400mm excluding taps, chain and plug and porcelain stopper but including CI brackets and CP waste fittings and PVC waste pipe of 32mm dia complete all as specified and directed.

Supply and fix in repairs 10 litres PVC valveless symphonic action type flushing cistern high/low white complete with inlet,ball valve float and handle including brackets and 32 mm PVC bend and joint with WC complete all as specified and as directed

Supply & fix in repairs Vitreous china wash down water closet pan (pedestal pattern), white, complete including fixing to trap, Incl Supply and fixing of PVC seat and cover closed pattern with flat bottom and cover and mild steel chromium plated hinge device for pedestal pan and connecting to drain or out going pipe and to flushing pipe etc., complete all as specified and as directed.

Supply & fix in repairs 15 mm bore fancy type pillar cock, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed

Supply and fix brass chromium plated tubular towel rail D type 20mm dia 600 mm long between flanges all as directed.

Supply & fix in repairs, Liquid soap container of PTMT as approved fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 105 gms) all as specified and as directed.

Supply and fix in repairs 10 litres PVC valveless symphonic action type flushing cistern high/low white complete with inlet,ball valve float and handle including brackets and 32 mm PVC bend and joint with WC complete all as specified and as directed

Material and labour for rotational moulded polyethylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 25 mm dia ball float valve with polythene float dismantling the old one as directed complete. complete all as specified and directed .

Supply and fix in repairs 15 mm bore gun metal, globe or gate valve cast copper chromium plated fancy type with iron wheel head , screwed both ends for iron pipe with crutch or buttrtfly handles all as directed.

All as per item no. 116 here in before but of 25 mm dia.

Supply and Fix 110 mm dia bore PVC (SWR) bend all as specified and directed.

Supply & fix cast iron floor trap diameter of outlet in 100mm with grating including jointing to waste pipe fixed in cement concrete including jointing with solvent cement all as specified and as directed.

Material and labour for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in padding on roof , surface finished even and smooth without using extra cement all as specified and as directed.

Material and labour for ement concrete (1:2:4) type B1, (using 20 mm graded stone aggregate) as seismic, plinth and similar bands, coping, kerbs, cills, steps, parapets, apex stones, bed plates, kerbs, railings up to 60 cm in height, water troughs and the like rounded or chamfered on edges including necessary form work all as specified and as directed. Note: This item is also applicable in broken RCC chajjas and roof projection.

Rendering 20mm thick cement plaster in cement mortar 1:4 on concrete surface of roof and finished even and smooth using liquid WPC all as specified and as directed. Note : WPC measured separately as supply only.

Material and labour for cleaning the newly plastered surfaces of roof slab, Chajja, canopy, parapet etc., thoroughly with wire brushes and providing water proofing treatment all as specified here in after :- (a) Bituminous primer @ 0.30liter per sqm conforming to IS 3384-1986 (b) 3mm thick approved APP polymeric membrane minimum weighing 3 Kg/Sqm (one layer) laid by torch application method with over laps of 100 mm joints on traverse direction and 75 mm at longitudinal direction duly thermofused by flame torch all as specified in application manuel of the company (c) Painting with one coat of bitumin grade 85/25 @ 1.2 Kg/Sqm. (d) Applying two coats of aluminium paint @ 100ml/Sqm

Supply only approved liquid water proofing compound

Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth, in any type of soil for foundations etc and getting out complete all as specified.

Returning, filling in and ramming with excavated soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick all as specified.

Removing excavated material to a distance not exc.50 metres and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed.

Material and labour for approved moorum brought from outside MD land as in filling under floors or pavings in layers not exc. 15 cm thick spread, levelled and well rammed including watering complete all as specified and directed.

Material and labour for plain cement concrete 1:3:6, type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified.

Material & labour for plain cement concrete 1 : 2 : 4, type B1 (using 20 mm graded stone aggregate) as in surface channel and drains all as specified and as directed.

Material and labour for brick work with old size sub class 'B' bricks straight or curved on plan to any radius, built in cement mortar 1:4 as in walls of drains, manhole etc., all as specified.

Material and labour for ement concrete (1:2:4) type B0, (using 12.5 mm graded stone aggregate) as seismic, plinth and similar bands, coping, kerbs, cills, steps, parapets, apex stones, bed plates, kerbs, railings up to 60 cm in height, water troughs and the like rounded or chamfered on edges including necessary form work all as specified and as directed.

Material & labour for rendering 10mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete/ brickwork and making good disturbed ground all as directed.

Dismantling fencing wire mesh, any type all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil all as specified and as directed.

Material and labour for plain cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified.

Material and labour for plain cement concrete 1:2:4, type B-2 using 40mm graded stone aggregate as in base concrete for fixing posts/ struts complete all as specified.

Material and labour for plain cement concrete 1:2:4, type B-2 using 40mm graded stone aggregate as in base concrete for fixing posts/ struts complete all as specified.

Material and labour for 100mm thick PCC 1:4:8, type D-2 using 40 mm graded stone aggregate as in sub base of floor all as specified and as directed.

Material and labour for 100mm thick PCC 1:2:4, type B-2 using 40 mm graded stone aggregate as in path finished fair and even all as specified and as directed.

Material and labour for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified.

Material and labour for rolled mild steel sections conforming to Fe-410W(GdeE-250) quality B framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete all as specified and as directed.

Material and labour for mild steel sections as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as specified.

Material and labour for mild steel round 10mm dia as in Tie bars with screwed ends, nuts, washers and mild steel plates for walls, chimneys, roofs, arches, etc. king rods and straining bolts confomiing to Fe290 Gde-E-165 all as specified and as directed.

Supply and fix Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, dia of bolt 12mm and length exc. 5cm and not exc. 10 cm all as specified and as directed.

Supply and fix chain link fencing made of 3.8 mm to 4mm dia galvanised mild steel wire and size of mesh 50 mm x 50 mm including line wires and weight exceeding 4 kg / sqm and binding wires etc., complete all as specified and as directed.

Supply and fix Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. (each line wire to be measured), complete all as specified and as directed.

Demolition of reinforced cement concrete (reinforcement shall be cut as required to facilitate demolition) in ground floor (below or above GL) not exceeding 15 cm thickness all as specified and directed.

Material and labour for reinforced cement concrete M-25 (Design mix) using 20 mm graded stone aggregate as foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc., basement slabs, all as specified and as directed.

All as per item no. 151 here in before but in columns, pillars, piers, posts and struts.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter (flat) for rough finished surface of concrete,all as specified & directed.

All as per item no. 153 here in before but to columns, pillars, piers, posts and struts.

Material & labour for rendering 5 mm thick in cement mortar 1:4 on exposed new concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

E/M ITEMS Taking down carefully copper/aluminium point wiring (light, fan, socket or power etc) on TW batten/PVC casing caping, steel surface /PVC conduit including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Material and labour for point wiring with two single core, PVC insulated, unsheathed, multi stranded bright annealed copper conductor cable, 1.5 Sq.mm 1100 Volts, FR grade drawn through and including heavy duty PVC casing and capping not less than 25 mm width and accessories surface mounted on walls, ceilings etc. on & including PVC box and plate for mounting switches, sockets, regulators etc and one run of 1.5 Sq.mm PVC insulated, unsheathed, multistranded, copper conductor cable FR grade as earth wire and connected to common earth dully complete for one light/ fan/ bell point all as specified and directed complete.

All as per item no. 157 hereinbefore but for one 3 pin socket out let 5 Amps on same board.

All as per item no. 157 hereinbefore but for one 3 pin socket out let 5 Amps on independent board.

All as per item No 157 herein before but two runs of copper condutor of size 2.5 sqmm as in socket outlet / power point 15 Amps.

Supply and fix switch piano type flush button 5 Amps single pole one way all as specified and all as directed.

Supply and fix switch piano type flush button 15 Amps single pole one way all as specified and all as directed.

Supply and fix Bell push 5 Amps single pole one way suitable for 230 Volts flush type all as specified.

Supply and fix electric bell ding dong AC 230 Volts, Single pole complete all as specified and as directed.

Supply & fix socket out let 2 in 1, 5 pin 5 Amps flush type complete all as specified and as directed.

Supply & fix socket out let 2 in 1, 3 pin 5 and 15 Amps flush type complete all as specified and as directed.

Supply and fix in repairs ceiling rose of 3 phase/PVC/ polycarbonate, insulated body 65 x 50mm two or three terminals all as directed.

Supply and fix in repairs lamp holder PVC/ Polycarbonate type with back plate suitable for batten fitting Single Phase AC 230 Volts complete all as directed.

Supply and fix in replacement of stepped type electronic fan regulator flush type 2 modules for 1200/1400mm sweep fans on the existing laminated sheet complete all as directed.

Supply and fix in repairs MCB SP 5 to 30 Amps 240 volts B series 10 KA all as directed.

Supply and fix in repairs MCB SPN 5 to 30 Amps 240 volts. B series 10 KA all as directed.

Supply and fix in repairs sheet metal enclosure for DB’s with bus bar , MCB SPN 8 way, 240 volts double door with detachable gland plate all as directed.

Supply and fix sheet metal enclosures Distribution board 415 volt, Vertical TPN 8 way with provision for DPx160 series MCCB of approved make as incomer and SP/TP MCBs as outgoing as per IS including compact insulated bus bar and rounded neutral bar, double door etc., complete surface/recess mounting IP-43 IK-09 protection with the following complete all as directed :- (i) MCCB DPx160 series thermal magnetic, 25 KA rupturing capacity,125A, 4 pole as incomer - 01 No (ii) MCB SP 6 to 32 Amp,10 KA - 19 Nos (iii) MCB TP 10-30 Amp,10KA - 03 Nos.

Supply and fix in repairs LED light fittings 1x18/20 watt 4 feet long complete with LED rode 18/20 watt, spring loaded rotary holder, connector etc. complete and connecting up with and including 23/00.0076 size 3 core copper flexible wire from connector to ceiling rose/adoptor including all necessary fixing arrangements complete all as directed. Make: Crompton fitting DMLN1LT8-16, 1X18/20W and LED rod LT8-20-865-2 or equivalent in Philips/Bajaj/Havells/Wipro as approved.

Supply and fix in repairs flood light fittings 140 watt LED energy saving, environmental friendly long life versatile die cast aluminium housing with IP 66 protection, 10 KV external SPD with high power LED and acessories fixed on new GI pipe braket/ angle iron fixed on building and connection with PVC aluminium 1.5 sqmm 3 core cable etc complete all as directed. Make: Crompton Cat Part No: LFLN11-140-CDL/60 or equivalent in Philips, Havells, wipro as approved by GE

Supply and fix in repairs sub main wiring with PVC insulated un armoured heavy duty copper conductor 1100 Volts FR grade 2 runs of single core 2.5 Sq.mm cable and one run of 2.5 Sqmm copper earth wire for continuous earth fixed on wall/ceiling/ floor etc. drawn in PVC casing capping complete all as specified and as directed. Note :- Two runs of current carrying conductor and one run of earth conductor alongwith PVC casing/capping shall be measured as one unit.

Supply and fix in repairs sub main wiring with PVC insulated un armoured heavy duty copper conductor 1100 Volts FR grade 2 runs of single core 4 Sq.mm cable and one run of 4.0 Sqmm copper earth wire for continuous earth fixed on wall/ ceiling/ floor etc., drawn in PVC casing capping complete all as directed. Note :- Two runs of current carrying conductor and one run of earth conductor alongwith PVC casing/capping shall be measured as one unit.

Disconnect and insulate electric supply wire and taking down carefully ceiling fan of any make 1200 mm sweep,dismantling and opening for checking the bearing, bushes overhauling including oiling, greasing, replacement of cotter pins, including scrapping the old existing paint and painting with two coats of synthetic enamel paint over one coat of red oxide primer, writing the MES No.and replacement of flexible cord size 23/0.0076 and rubber bushes etcand hanging the ceiling fan to its orignal position by connecting with new 3 core copper conductor cable PVC insulated and sheathed, from ceiling rose to fan connector including replacement of clamps rubber shackle and fixed with necessary bolts , nuts,washers, etc., including testing completeas directed. Note: Replacement of winding measured separately

All as per item no. 178 here in before but of exhaust fan of 450 mm sweep.

Material and labour for removing the burnt winding and rewinding the ceiling fan 1200 mm sweep with super enamelled copper winding wire of suitable gauge, insulating, putting sleeves etc complete all as specified and directed.

All as per item no. 180 here in before but of exhaust fan of 450 mm sweep.

Labour charges for machine work for enlargement of bushing housing to house bearing 6201 in place of bushing in modification for longer services and supply and fix fan clamp assembly consisting of nut, bolts, washers and split pin alongwith suitable size rubber real for mounting of fan down rod all as directed.

Material and labour for insulated copper flexible conductor 3 core 1 sqmm all as directed.

Supply and fix fan clamp assembly consisting of nuts, bolts, washers and split pin alongwith suitable size rubber seal for mounting of fan down rod as per standard practice complete all as directed.

Supply and fix capacitor for ceiling fan of 2.5 MFD all as directed.

Supply and fix in repiars ball bearing of size 6201 suitable for fans all as directed.

Supply and fix in repiars ball bearing of size 6202 suitable for fans all as directed.

Supply and fix in repairs louvers & shutters complete for exhaust fan of size 380 mm sweep all as directed.

Supply and fix wall hanging PVC fans 230 V, 400 mm sweep including connection accessories complete of approved make all as directed. Make: Havells model SWING, Single phase or equivalent in specified makes as approved.

Supply and fix in repairs ceiling light fittings 36W LED energy saving, environmental friendly long life and with accessories fixed to false ceiling of grid 60 cm x 60 cm including connection with PVC copper 1.5 sqmm 3 core cable etc., complete all as specified and as directed. Make: Crompton model no. LCTLRN-36-CDL or equivalent in Philips/ Havells/ Wipro as approved.

Material and labour for providing earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 metres deep below ground level) surrounded with alternate layer of charcoal and salt of 15 cm thick, 3 feet x 3 feet all around the electrode as directed with top edge of the plate not less than 1.5 mtres below normal ground level,

connected to galvanised earth strip of size 25 x 4.0 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion including earthing pit in PCC 1:3:6 type C-0 & 40mm thick precast RCC cover in 1:2:4 type B1 reinforced with 8mm dia TMT bar @ 75mm c/c both ways with 02 Nos lifting handles of 12mm dia MS plain bar, GI pipe 20mm dia light grade with funnels & wire mesh for watering and 40mm dia light grade GI pipe for earth lead protection etc including necessary excavation and earth work in any type of soil complete all as specified and as directed. Note:- GI strip and protection pipe upto 7.5mtr is deemed to be included in the quoted rate.

Note:- The amount of schedule of credit on page No. 50 shall be deducted from the amount quoted against sch 'A' while deriving at the contract sum for accptance.

NIKAASH INFRACON

N.U. MIRZA

Manak landmarks