Karnataka

Active

Works

Bridges/Culverts

Rehabilitation or Improvements of Vrishabhawathi Bridge at Ch 18 10 km on Bangalore Magadi Road - SH-85 to Gunjur Road - SH-35 via Gangappanahalli Cross Chandrappa Circle Doddaladamara Ramohalli Kumbalgodu Agara Thathaguni Kaggalipura Bannerghatta Road Hommadevanahalli Bettadasapura Wipro Junction NH-7 Hosur Road Konappana Agrahara Sarjapura Main Road Kodathi Gate Kachamaranahalli and up to Gunjur State Highway

Public Works Department

PWD Division Office Bengaluru | Bangalore, Karnataka

Amount: Refer DocsCloses: 1 Jul 2026

Tender Value

Refer Docs

EMD Value

₹4.2 L

Closing Date

1 Jul 2026, 9:30 pm

Similar Past Results

Similar tender results from the same govt authority in the past 3 years.

Tender Inviting Organisation

Name

Public Works Department

Work Description

Rehabilitation or Improvements of Vrishabhawathi Bridge at Ch 18 10 km on Bangalore Magadi Road - SH-85 to Gunjur Road - SH-35 via Gangappanahalli Cross Chandrappa Circle Doddaladamara Ramohalli Kumbalgodu Agara Thathaguni Kaggalipura Bannerghatta Road Hommadevanahalli Bettadasapura Wipro Junction NH-7 Hosur Road Konappana Agrahara Sarjapura Main Road Kodathi Gate Kachamaranahalli and up to Gunjur State Highway

Tender Information

Tender ID

307530

Reference Number

PWD/2025-26/BR/WORK_INDENT34531/CALL-2

Tender Type

Open

Product Category

Bridges/Culverts

Location

PWD Division Office Bengaluru

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredAnnual Turnover Certificate and Balance sheets Certified from Registered Chartered Accountant with UDIN Number compulsory mentioned in turnover certificate.

RequiredKPWD Class II and above Registration Certificate

RequiredWork Done Certificate for Similar nature work, duly attested by the Officer Not below the rank of E.E.

RequiredGST Certificate, Pan Card & Tin Certificate

RequiredBanker Certificate - Line of Credit in the prescribed form

RequiredINCOME TAX Balance sheets and Annual Turnover Certificate issued by the CA with Membership No. with UDIN -2021-22 to 2025-26

RequiredExisting Commitments work details - B-Value - should be furnished duly attested by the concerned Executive Engineer as per Standard Tender Documents

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

Conditional tenders will not be accepted

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

The employer is not responsible for any delay in accessing KPPP Portal.

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders.

Materials like bitumen, steel, cement etc., required for the work shell be procured by the tenderer themselves and should get tested by the quality control authority before use on the work.

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labor welfare fund.

All scanned documents to be uploaded shall be in original, Submit the original document at the time of technical bid opening or next day and the Executive Engineer reserves the right to verify the original documents before approval.

If any, additional information required, the same may be obtained from the office of the Executive Engineer, PWD, Bangalore Division, BANGALORE during office hours on all working days. It may be noted that if any of the dates mentioned above happened to be a General Holiday, the next working day will be considered.

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons.

The contractors assessed available tender capacity shall be more than the tender value, it will be calculated as per the STD tender document Attached.

The Tender processing fee shall not be refundable.

Tenderer who qualifies in the technical bid such tenderers financial bid will be opened.

Contractor should establish a fully functional laboratory at site at no extra cost in order to carry out all the required tests for the materials being used in the project.

Contractor should take all precautions to ensure that no damage is caused to the existing similar structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

Contractor should carryout additional test required to test the suitability of materials before using the same to the work.

Formation levels and other data furnished are bare minimum, the contractor should make all efforts to validate and to get additional data if required at his own cost. Contractor should execute the project with least impact to the environment.

When Structure constructed disputes arising on account of damages to the existing bunds, Structure and other private properties, if any, has to be resolved by the contractor. All precautions should be taken by the contractor so that there are no damages to such public /private properties.

Contractor should take all precautionary measures to avoid any damage to the utilities during excavation as well as utility shifting. To that extent the contractor should indemnify the client.

Contractor should follow strictly the prevailing rules of labour act.

The Bidder shall not furnish any fake/fabricated/false information or withhold facts etc., if the bidder is found to have violated any of these above (found either during evaluation or after awarding the tender), the tender shall be rejected and action as per rules and regulations shall be taken against the Bidder.

If the Successful Bidder has quoted lesser rates than the estimated rates then he should without fail remit the Unbalanced Tender Amount along with the Security Deposit within the stipulated time as that shall be specified in the Letter of Acceptance, failing which the tender of the Successful Bidder shall be rejected.

All the items of work as Maintained in the Bill of Quantity (BOQ) are including lead and lift charges loading and unloading charges labour charges all incidental charges hire charges of all machinery and equipment required for successful completion of work etc., complete. The work shall be executed as per standard technical specification and directions of Engineer in charge of the work.

Terms and condition of Contract as per Approved STD KW-4

Uploaded original BG or EMD to be submitted to The Executive Engineer, PWD Bangalore Division, Bangalore before the date of opening of the tender otherwise tender will be rejected for non-submission of EMD.

The Defect liability period of the work is 24 Months from the date of completion of work.

Contractor shall be Class-II & Above

Progress of Work will be reviewed monthly / at the end of each Milestone. In case the Progress achieved falls short by more than 10% of the Cumulative Programmed, the Reasons for such Shortfall shall be examined and a Record made thereof apportioning the Responsibilities for the Delay between the Contractor and the Employer.

The increase in GST shall not be paid in the extended period of contract for which the Contractor alone is responsible for delay as determined by the authority while granting the extension of time.

The Item rates are Exclusive of GST

The rates should be quoted Exclusive of GST. (As per the GOVT Order FD 417 Exp-12/2024 Dt:09.08.2024.)

The quantities for the necessary deviation road and cofferdam are provided on a one-time basis in the BOQ and any additional quantities required for completion of the work shall be deemed included in the Contractors rates no extra payment shall be admissible, and such works shall be executed at the Contractors own cost and risk.

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

3.2(b) To qualify for award of this contract each tendered in his name should have in the last five years period. 2021-22 to 2025-26. Mandating satisfactory completion as a prime contractor for at least one similar BRIDGE WORK to an extent of 50% of the cost of the work, such as BRIDGE WORK of value not less than Rs. 141.17 Lakhs.

Work Done Certificate

3.2(c) Executed in any one year, the following minimum quantities of work usually 80 percent of the peak annual rate of construction Earthwork excavation / Embankment---3525.00 Cum, PCC/RCC--700.00 Cum, T.M.T Steel-----24.55 Tonne, Micro Concrete---58.68 Cum & Carbon Fibre Laminate---3101.04 m

Work Done Certificate

Financial Status

3.2(a) To qualify for award of this contract, each Tenderer in his name should have financial turnover in the last five years i.e. 2021-22 to 2025-26. achieved in at least two financial years a Minimum financial turn over (in all classes of civil engineering construction works only) of Rs. 564.68 lakhs lakhs

Audited CA Certificate of Annual Turnover

3.3 b liquid assets and /or availability of credit facilities of no less than Rs 94.11 lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. (usually the equivalent of the estimated cash flow for three months in peak construction period). (Submit Unconditional document).

Line of Credit

Others

3.6 A-Maximum value of civil engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress. N-Number of years prescribed for completion of the works for which tenders are invited. 09 Months B-Value, at 2026-27 price level of existing commitments and on-going works to be completed during the next 09 Months

Others -- Ongoing and Existing Commitments work details

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹4.2 L

Important Dates

Last Activity

22 Jun 2026

Published

22 Jun 2026

Bid Opening

2 Jul 2026

Download Ends

29 Jun 2026

Pre-Bid Meeting

25 Jun 2026

BOQ Preview

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Chipping unsound weak concrete material from slabs. Beams, columns & roofs upto 50mm by manual means or by standard power driven percussion type including cleaning reinforcement with ...

•

Sealing of crack / porous concrete with Epoxy Grout by injection through nipples complete as per clause 2803.1. Ref to MoRT&H : IRC - 2803 ---- Including all lead lifts loading unloading transportatio...

•

Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as ...

•

Epoxy bonding of new concrete to old concrete. Ref to MoRT&H : IRC - 2805 ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost...

•

Cleaning of reinforcement from rust by Alkaline solution thoroughly as per direction of Engineer in charge of work. ---- Including all lead lifts loading unloading transportation labour hire charges o...

•

Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, ...

•

Guniting concrete surface with cement mortar applied with compressor after cleaning surface and spraying with epoxy complete as per Technical Specification. Ref to MoRT&H : IRC - ...

•

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of ...

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification - Granular material. Ref to MoRT&H : IRC - 710.1...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Shear Connectors - Drilling 25 mm / 32 mm dia. Holes vertical or inclined in concrete /masonry / rock by percussion drilling method using jack hammer asdirected to specified depth including cost of al...

•

Grouting with cement mortar 1:1 proportion by weight using pneumatic grout pump through grout holes under pressure using clean & approved sand including cost of all materials, machinery, labour etc., ...

•

Micro Concrete Encasement of grade M30

•

Providing concrete encasement for RC members with micro concrete using 8mm down size aggregate (graded, free from dust) with super plasticizer, with centring and...

•

Carbon Fiber laminates Providing and applying Carbon Fiber FRP Pultruded Laminate strips to the prepared substrate using thixotropic epoxy adhesive . The FRP laminate used shall be of zero degree unid...

•

Protection works

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat o...

•

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direc...

•

Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, ...

•

Repair of RCC Railing - Carrying out repair of RCC M30 railing to bring it to the original shape. ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing...

•

Painting on concrete surface - Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and apply...

•

Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2705 ---- Including all lead lifts loading unloading transportation labour hire charges ...

•

Boundary pillar / Guard Stone Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting PWD 202...

•

Providing and fixing of retro- reflectorised cautionary, mandatory and informartory singn as per IRC-67-2022 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick alimininum sheeting...

•

water diversion

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

•

PIPE CULVERTS - Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row - Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding...

•

Providing and placing sand bags consisting of empty cement bags filled with 35 to 40 kg locally available sand for forming ring bund including cost of all materials, labour, plugging joints with selec...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW-4 34531 Revised.doc

Tender Document • 1.65 MB

Ready to Participate?

Download all tender documents and submit your bid