Construction work of painting, tiles, toilet fitting, gate, etc. in the community building in Ward-47, Mohalla Purva Ahiran.

Dismentalling reinforce cement concrete or reinforce brick work including staking of matrial as directed by the Engineer-in-charge within a distance of 60 meter (200 feet)

Scraping old white or colour wash including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 metre (200 feet).

Cement Concrete with 4 cm gauge approved stone grit, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.

M-150 brick work in 1:4 one cement and four course sand mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work.

12 mm thick plaster 1:4 with Cement and four course sand including supply all material and labour, T & etc.

Providing wall putty on old surface with approvel quality material of Berger/J.K./Birla or similar make 2 coats

Finishing wall with water proof paint of approved make and quality with three coat as per

paniting roofs or other iron work in large areas with two coat priming and one coat of approved (above one Sq Metre) paint (British antesol or equivalent) including supply of all materials labour Tools & plants etc required for proper completion of the work paint to be used ISI Marked.

R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 in Slab excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire.

M.S. (tor steel or plain) in Plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire.

Supply and fixing 6 mm. (¼") China white glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and Tools and Plants.

Supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600x600 mm size in flooring and skirting with 1:3 approved cement and coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work. as per direction of Engineer - in- charge

Supply and fixing of Kota stone ln flooring 20 mm thick and

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White glazed earthen ware(Indian Type)/Neycer W.C. Pan 580 mm Dia.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 30x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : urinal pot a) 15 mm nominal bore

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever require:,white vittreous china wash basin size 630x450 mm with a pair of 15 mm C.P. brass piller tapsa.

Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge 15mm dai

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI: 12701 marked(Sintex or equivalent) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as per direction of Engineer-in-charge.

M.S. or iron work in stair case roilling in heavy sizes such as trusses, built up gates, records racks, roof work, Gates etc including rivetting or welding where necessary. S.I.

S/ fixing sing board at site +all comp of work