Construction of contron room and errection of chain link fencing for shooting House at SKPA Udhampur

Amount

Earth work in excavation in foundation trenches or drains (not exceeding 1.5M in width as well as 10Sqm on plan) including dressing of sides ramming of bottoms lift up to 1.5M including getting out the excavated soil and disposal of surplus excavated soil within a lead of 50M from edge cutting, disposed earth to be leveled and neatly dressed in all kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1Cement: 4 fine sand: 8 grade stone aggregate 40mm nominal size) (crushed) including all carriages and cost of material involved.

Providing and laying in position cement concrete of specified grade excluding C/o centering and shuttering all work upto plinth level in 1:3:6 (1 cement : 3 course sand : 6 stone agg. using 20mm nominal size) including curing complete including all carriages and cost of materials involved.

Providing and laying in position cement concrete of 1:2:4 mix (1 Cement: 2 course sand: 4 graded crushed Stone aggregate 20mm nominal size) excluding the cost of centering and shuttering. All work upto plinth level, incl carriage of all materials involved.

Reinforcement cement concrete work in beams, suspended floors, roofs having slope upto 15 degree, landings, balconies, shelves, chajjas, lintels, bands plain window sills, stair cases and spiral stair cases upto floor five level excluding the cost of centering, in 1:1.5:3 (1 Cement: 1.5 coarse sand: 3 graded Stone aggregate 20mm nominal size) including all carriages and cost of materials involved upto site of work complete including head load 300 mtr complete.

Brick work with FPS bricks of class designation 75-A in super structure up to floor V-level In cement mortar 1:6 (1cement: 6 fine sand). including all carriages and cost of material involved.

15mm cement plaster on rough side of single or half Brick wall of mix: 1:6 mix (1 cement : 6 fine sand) including all carriages and cost of materials involved.

12mm cement plaster on rough side of single or half Brick wall of mix: 1:6 mix (1 cement : 6 fine sand) including all carriages and cost of materials involved.

6mm cement plaster on ceiling of mix: 1:3 mix (1 cement : 3 fine sand) including all carriages and cost of materials involved.

15mm cement plaster on rough side of single or half Brick wall finished with a floating coat of neat cement of mix: 1:4 mix (1 cement : 4 fine sand) including all carriages and cost of materials involved.

Centering and shuttering including strutting propping etc. and removal of form work in foundations, footings, basses of columns etc.

Centering and shuttering including strutting, propping etc. and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering including strutting, propping etc. and removal of form work for suspended floors, roofs, landings, balconies, stairs, landings, spiral stair cases and access platforms.

Centering and shuttering including strutting, propping etc. and removal of form work for Edges of slabs and breaks in floors and walls under 20cms wide

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes.

P/F Hi rib corrugated G S colour sheet roofing 0.50mm thick including vertical/ curved surface fixed Pre-colour coated sheets roofing polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G I limpet washers or with G I limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing of PVC false ceiling of approved make and quality having thickness minimum 8mm of approved design complete in all respects including the cost of frame work, hanger bars, screws, all fitting and fixtures as directed by EIC (floor area of the room/ hall is to be measured for the payment) including the cst of material and carriages complete.

Reinforcement for RCC works including straightening, cutting, bending placing in position and binding all complete. Mild steel and medium tensile steel bars. Including all carriages and cost of material involved.

Providing and fixing of G I chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per the direction of EIC. Made of G I wire of dia 4mm including all carriages and cost of material involved.

Steel work in single section angle 50x50x6mm iron posts embedded in cement concrete including fixing of flat iron 40x6mm fixing in proper position with nuts and bolts including applying of primer coat of red-oxide primer and all carriages and lifts, incidential consequential costs complete (work to be executed as per relevant IS codes and as directed EIC at site complete.

Painting with ready mixed synthetic enamel paint of approved brand and manufacture to give an even shade (two or more coats) on steel work including all carriages and cost of material involved.

Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and including priming coat with cement primer. including all carriages and cost of material involved.

Finishing walls with 100% premium acrylic emulsion paint having VOIC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives. New work (two or more coats applied @ 1.43 ltre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

P/ laying vitrified floor tiles of sizes 60x60cm of approved brand (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS :15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. including all carriages and costs of material involved and as directed by EIC complete.

Providing and fixing ceramic glazed floor tiles 300x 300mm (thickness to be specified by the manufactures) of Ist quality conforming to IS:13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as white, ivory, grey, fume Red, brown laid on 20mm thick be bed of cement mortar 1:4 (1 cement :4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete incl. all carriage and costs of material involved.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:13753 of minimum thickness 5mm of approved make (12x18) like NITCO. ORIENT, SOMANY, KAJARIA or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slury @ 3:3 Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete. including carriage of material.

Providing and laying of 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/ shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filing the joints with coarse sand etc all complete as per direction of EIC.

Providing wood work in frames of doors, windows, clearstory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) with (Sal wood)

Providing and fixing 35mm thick wire gauze shutters using galvanized M.S wire gauze of average width for aperture 1:4mm with wire of dia 0.63mm for doors, windows and clerestory windows including ISI marked bright finished or / and black enameled M.S butt hinges with necessary screws.( deodar wood,)

Providing and fixing paneled/ glazed shutters for doors/windows/ clerestory windows using 10kg/ sqm 4mm thick float glass panes including ISI marked M S pressed butt hinges bright finished of required size with necessary screws. 35mm thick deodar wood.

Providing and fixing paneled or paneled and glazed shutters for doors / clerestory windows including ISI marked M S pressed butt hinges bright finished of required size with necessary screws, including paneling with 12mm thick laminated board, complete 35mm thick deodar wood.

Providing and fixing of M.S Grills Railing, licking doors of required pattern in frames of windows etc with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.

Applying priming coat with ready mixed pink or grey primer finishing with knifing grey paste filler of approved brand and manufacture.

Painting with ready mixed synthetic enamel paint of approved brand and manufacture to give an even shade (two or more coats) on new work including all carriages and cost of material involved.

Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws etc complete 300x16mm.

Providing and fixing of superior quality ISI marked standard make aluminium tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws etc complete 300x16mm.

Providing and fixing aluminium hanging floor door stopper ISI marked anodized (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws etc complete twin rubber stopper.

Providing and fixing Aluminium handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws etc complete.

P/F wash basin with C.I. / M.S. brackets, 15mm C. P brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: flat back white vitreous china wash basin size 630x450mm with a pair of 15mm C. P. brass pillar taps.

Providing and fixing of G I pipes with fittings and PVC pipes complete Job (as directed by EIC).

G I 15mm dia

G I 20mm dia

Providing and fixing of C P Towel Rod of approved / standard make.

Providing and fixing of C P Bib cock long nose of approved / standard make.

Providing and fixing of C P Bib cock short nose of approved / standard make.

Providing and fixing of C P grating of approved / standard make.

Providing and fixing of C P Soap case of approved / standard make.

Providing and fixing of C P Angle valve of approved / standard make.

Providing and fixing of following PVC fittings/ Pipes (Type –B) including trenching and refilling complete Job. (Standard make as approved by EIC)

PVC 100mm dia Pipes

PVC 75mm dia Pipes

PVC 100mm bend

PVC 75mm bend

Floor trap

Providing and fixing of urinal with waste pipe and coupling etc complete.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS license No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (sintex, electroplast, star, lotus or equivalent having valid ISI license. (Three layer)

Providing and installing of 1.0 HP water Motor / Pump from reservoir tank to overhead tanks of approved / standard make including power supply all complete.

Structural steel work in built up section , truss and framed work including cutting, hoisting, fixing in position using structural steel etc, as required in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including applying a priming coat of approved steel primer all complete.

NARESH GUPTA CONTRACTOR