MODERNIZATION OF LRs HOSHIARPUR CONSTITUENCY MARKET COMMITTEE HOSHIARPUR and Construction of HL Bridge GP NO. 5 SPECIAL CENTRAL ASSISTANCE (PHASE-II) TO STATES FOR CAPITAL INVESTMENT 2025-26 (1 Year Defect Liability period plus 4 Years Maintenance of

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: EXECUTIVE ENGINEER PROVINCIAL DIVISION, PWD B&R Br., HOSHIARPUR

Name of Work: MODERNIZATION OF LINK ROADS HOSHIARPUR CONSTITUENCY MARKET COMMITTEE HOSHIARPUR and Construction of HL Bridge GROUP NO. 5 "SPECIAL CENTRAL ASSISTANCE (PHASE-II) TO STATES FOR CAPITAL INVESTMENT 2025-26" (One Year Defect Liability period + 4 Years Maintenance of Road)

Contract No: Civil Works

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Work Name Item Code / Make Quantity Unit Rate Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT in Rs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

1 Compaction of earth work & Preparation of sub grade including loosening, leveling of earth 225mm thick top layer, rough dressing of soil, final dressing of earth to give level, camber, watering, rolling with road roller, compacting the bed to achieve minimum dry density as given in the Table 300-2 as per Technical clause 305 of MORT&H specifications. as per CSR 24.4 (c ) 39683.65 Sqm 6.42 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

2 Providing and laying of Brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr complete as per Punjab PWD specifications 36298 Mtr. 84.96 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

3 Excavation in Soil (any type) using Hydraulic Excavator CK 90 Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lift and combined lead up to 60 mtr. 3503.1 Cum 33.71 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

4 Construction of granular sub-base by providing material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MORD technical specifications 2813.48 Cum 1542.03 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

5 Water Bound Macadam Grading I (withoutscreening for low volume Roads/undersigned Roads Providing, laying, spreading and compacting stone aggregates of Grading I to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical specifications 2153.95 Cum 1850.83 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

6 Water Bound Macadam Grading II (without screening for low volume Roads/undersigned Roads Providing, laying, spreading and compacting stone aggregates of Grading III to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, applying and brooming Water Bound Macadam Grading II requisite type of binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical clause 404 of MORT&H specifications without screeening 15649.03 Cum 1859.89 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

7 Credit of Brick Bats 225.61 cum 531 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

8 Credit of Brick 65020.5 Nos 2.5 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

9 Kassi work undressed involving an average horizontal throw up to 2.0 metres and an average vertical lift up to 0.5 metres including breaking of clods Complete as per CSR Item no 6.2 (a) 7010.1 cum 81.35 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

10 Providing and laying surface dressing in single coat using crushed stone aggregates of specified size on a layer of bituminous binder VG-10 @ 1kg per sqm laid on prepared surface after cleaning the road surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per technical clause 509 of MORT&H specifications as per CSR 24.24 76512.68 Sqm 82.86 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

11 Providing and applying tack coat with penetration grade bitumen VG-10 using bitumen pressure distributor at the rate of 0.40 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical specifications as per CSR 24.16 (b) 182633.05 Sqm 23.23 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

12 Providing, laying and compaction of open - graded premix surfacing of 20 mm thickness consisting of crushed stone aggregates of specified grading premixed in a Continuous type hot mix plant with bituminous binder VG-10 @ 1.46kg per sqm, laid with Paver Finisher Mechanical and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 510 of MORT&H specifications as per CSR 24.25a 136602.46 Sqm 141.4 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

13 Providing and laying of premix sand seal coat premixed in Continuous type hot mix plant using specified fine aggregates and penetration grade bitumen VG-10 @ 0.68kg per sqm, laid to the specified levels, grade and cross fall complete as per technical clause 511 of MORT&H specifications) as per CSR 24.28 (C ) Seal Coat Type B 136602.46 Sqm 58.06 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

14 Providing and laying bituminous macadam 50mm to 75mm thick with Continuous type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @3.4%, laid over a previously prepared surface with paver finisher Mechanical to the required grade, level and alignment and rolled to achieve the desired compaction complete as per technical clause 504 of MORT&H specifications 1721.53 Cum 7571.01 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

15 Construction of Drain Type-VI Complete in all respect as per entire satisfaction of Engineer Incharge 150 Mtr. 995.56 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

16 Providing and laying bituminous concrete 30mm to 45mm thick with Continuous type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.4%, laying with a Paver inisher Mechanical to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete as per technical clause 507 of MORT&H specifications 351.14 Cum 11012.41 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

17 Making 50 mm x 50 mm furrows 45 degree to the center line of the road and at one meter interval in the existing bituminous wearing coarse including sweeping and disposal of excavated material within 1000 meters lead complete as per technical Specifications 51343.55 Sqm 5.27 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

18 Dismantling brick edging in strengthening portion include sorting and stacking dismantled material Complete as per CSR 8.5 i 451.2 Cum 144.33 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

19 Dismantling of existing Surface Pavement including crust and stacking of usable material and disposal off unusable material complete in all respects. 310.2 Cum 184.36 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

20 Compaction of earth work & Preparation of sub grade including loosening, leveling of earth 225mm thick top layer, rough dressing of soil, final dressing of earth to give level, camber, watering, rolling with road roller, compacting the bed to achieve minimum dry density as given in the Table 300-2 as per Technical clause 305 of MORT&H specifications. as per 3383.5 Sqm 6.32 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

21 Relaying of recovered material obtained from dismantling of road crust as Construction of granular sub-base by providing coarse graded material grading-I, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per technical clause 401 of MORT&H specifications 186.12 Cum 146.44 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

22 Construction of Concrete Road 14' wide Complete in all respect as per entire satisfaction of Engineer Incharge 2904 Mtr. 5687.37 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

23 Construction of Concrete Road 10' wide Complete in all respect as per entire satisfaction of Engineer Incharge 1415 Mtr. 3901.85 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

24 Construction of 18' Concrete road complete in all respect as per entire satisfaction of Engineer Incharge 3103 Mtr. 7431.03 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

25 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge. Complete in all respect as per analysis attached in estimate. 18660.64 Sqm 1310.24 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

26 Providing and laying 80 mm thick factory made cement concrete interlocking Paving blocks of M- 40 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge 400 Sqm 6887.78 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

27 Reinforced cement concrete M-15 grade ordinary kilometer stone of standard design for village roads as per IRC 8-1980 fixing in position including painting and printing etc. complete as per technical clause 804 of MORT&H specifications CSR 24.37 c 17 Each 2763.08 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

28 Reinforced cement concrete M-15 grade boundary pillars of standard design as per IRC 25-1967 fixing in position including painting and printing etc. complete as per technical clause 806 of MORT&H specifications CSR 24.39 122 Each 1371.82 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

29 Reinforced cement concrete M-15 grade village board of standard design fixing in position including painting and printing etc. complete as per PWD specifications CSR 24.40 37 Each 5498.3 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

30 Cautionary sign board 900x900x900mm triangularas per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 09 and as per IRC 67 2012 Using high intensity Microprismatic grade retro reflective Sheeting Type IV as per ASTM D 495609 and as per IRC 67 2012. 54 Each 4274.77 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

31 Cautionary sign board 600x600x600mm triangularas per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 09 and as per IRC 67 2012 Using high intensity Microprismatic grade retro reflective Sheeting Type IV as per ASTM D 495609 and as per IRC 67 2012. 4 Each 3964 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

32 Definition Plate 600x200mm rectangular as per as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012. Using high intensity Microprismatic grade retro reflective Sheeting Type IV as per ASTM D 4956 09 and as per IRC 67 2012 complete as per CSR Item no 24.49 b 51 Each 681.78 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

33 Place Identification sign board 900x600mm rectangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012 fixed over 4mm thick aluminium Composite material (ACM) sheeting Using high intensity Microprismatic grade retro reflective Sheeting Type IV as per ASTM D 4956 09 and as per IRC 67 2012 Complete as per CSR Item no 24.47 b 25 Each 6921.4 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

34 Providing and making rumble strips 15-20mm highat centre, 250mm wide placed at 1m centre tocentre over freshly laid bituminous layer by usingclose graded premix surfacing material type B atapproved locations to control speed and marked with 100mm wide white strips of thermoplastic road marking paint. The close graded premix surfacing material type B shall conform to technical clause 512 and thermoplastic road marking paint shall conform to technical clause 803 of MORT&H specifications 574 Mtr. 106.96 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

35 Construction of unreinforced plain cement concrete pavement in M-30 mix design over a prepared sub base with OPC 43 gradeconforming to IS:383 mixed with concrete mixer using batch type concrete mixer as per IS:1791, laid in position, compacted with needle vibrator, screed vibrator and plate vibrator, dewatering of free water with vaccum pump, finishing the surface with power floater, finishing to required lines and grades as per drawings and technical clause 1501 of MORD specifications 710.71 Cum 6116.59 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

36 Construction of Retaining Wall 7.5' Ht.complete in all respect as per entire satisfaction of Engineer Incharge 97.74 Mtr. 16955 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

37 Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) 312 sqm 243.36 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

38 Cement conc. 1:3:6 complete in all respect as per entire satisfaction of Engineer Incharge 600 Cum 4654.31 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

39 Construction of Causeway.complete in all respect as per entire satisfaction of Engineer Incharge 150 Mtr. 46476.65 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

40 Supplying and fixing of single mould twin shank reflective road studs made out of poly carbonate/ABS moulded body and reflective panels with micro prismatic lens or Glass Beeds capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values shall be as given in the detailed specifications and the product shall conform to ASTM D4280. The raised pavement marker shall also meet all the testing conditions of ASTM D4280 and fixed to the road surface using the adhesive. Two cylindrical Polymer Shanks of not less than 20 mm diameter and not less than 30 mm length shall be molded in the RPM body. 1630 Each 256.75 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

41 Road marking with hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 0.25kg per sqm area as per IRC:35 1997 complete as per technical clause 803 of MORT&H specifications Complete as per CSR Item No 24.57 6696.19 Sqm 324.92 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

42 Double Side 900 x 600 CM Signage Board 25 Each 9473.81 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

43 Videography of Road. 22 Each 1000 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

44 Add 1% Cultural Cess 188427627 percentage 0.01 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

45 Add 1% Cancer Cess 188427627 percentage 0.01 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

46 Construction of H.L. Birdge 3 Spans 10.0 m Normal 10.31 m Skew each eff. over Choe x-ing L.R. Hoshiarpur Chandigarh Road to Bilaspur in Distt. Hoshiarpur. 1 Job 23451680 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

47 Routine Maintenance after completion of Construction work as per periodicaly to routine maintenance mentioned in the technical specifications (For 2nd Year) 39.05 Km 48843.45 Full Conversion INR

48 Routine Maintenance after completion of Construction work as per periodicaly to routine maintenance mentioned in the technical specifications (For 3rd Year) 39.05 Km 69299.27 Full Conversion INR

49 Routine Maintenance after completion of Construction work as per periodicaly to routine maintenance mentioned in the technical specifications (For 4th Year) 39.05 Km 105148.39 Full Conversion INR

50 Routine Maintenance after completion of Construction work as per periodicaly to routine maintenance mentioned in the technical specifications (For 5th Year) 39.05 Km 131270.71 Full Conversion INR

51 Add 1% Cultural Cess on maintenance 13845639 percentage 0.01 Full Conversion INR

Total in Figures 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Quoted Rate in Figures Select Total Cost of Routine Maintenance

Quoted Rate in Words