OUTSOURCING OF SERVICES FOR MANNING AND OPERATION OF LIFTS SERVICES OFFICERS FLAT D, E, PRITHIVI BUILDING AND REPAIR/MAINTENANCE OF ALL TYPE DG SETS, AMF PANEL, AND OTHER CONNECTED WORKS AT ZONE A UNDER GE I RND DELHI

Amount

PART-1 OUTSOURCING SERVICES Outsourcing services for Manning & Operation of electrically operated lift of capacity 08 passangers - 01 No., suitable for G+5 (Ground+5 floors) installed at D-BLOCK to be operated by deploying one experienced qualified skilled mechanic cum operator, round the clock including Sunday and holidays in three shifts per day of 08 hours each (Ist shift from 0600hrs to 1400hrs, IInd shift from 1400hrs to 2200hrs and IIIrd shift from 2200hrs to 0600hrs) complete inclusive of daily maintenance of equipments complete all as specified and as directed.

Outsourcing services for manning & Operation of electrically operated lift of capacity 08 passangers - 01 No., suitable for G+5 (Ground+5 floors) installed at E-BLOCK to be operated by deploying one experienced qualified skilled mechanic cum operator per shift per day, round the clock including Sunday and holidays in three shifts per day of 08 hours each (Ist shift from 0600hrs to 1400hrs, IInd shift from 1400hrs to 2200hrs and IIIrd shift from 2200hrs to 0600hrs) complete inclusive of daily maintenance of equipments complete all as specified and as directed.

Outsourcing services for manning & Operation of electrically operated lift of capacity 08 passangers - 02 Nos, suitable for G+7 (Ground+7 floors) installed at PRITHVI to be operated by deploying one experienced qualified skilled mechanic cum operator per shift per day, round the clock including Sunday and holidays in three shifts per day of 08 hours each (Ist shift from 0600hrs to 1400hrs, IInd shift from 1400hrs to 2200hrs and IIIrd shift from 2200hrs to 0600hrs) complete inclusive of daily maintenance of equipments complete all as specified and as directed.

Rate required to be quoted for executing the work as described in Ser item No 1.00 to 3.00 above

Workers wage per person as per existing rules

ESIC (Employees state insurance contribution) as mentioned in tender document

Bonus as mentioned in tender documents

Overhead & Profit on Ser No 3.01 to 3.03

LWC as mentioned in tender documents.

GST as mentioned in tender documents.

Notes : Rate quoted by the contractor shall deemed to be included the following :- (i) Operator cum mechanic (skilled) shall be of Diploma/ITI passed with having training certificate in relevent trade not less than three year shall be employed for each shift.. (ii) It is an express condition of the contract that tenderers are required to quote their rates duly considered minimum applicable as per policy wages of the tradesmen intended in the tender, as in force on the end date of bid submission. It shall be deemed that quoted rates are based on minimum wages notified by the concerned authority for the station i.e Govt of India/State Govt/Union Teritory, whichever is higher including all statutory provisions such as EPF, GST, ESIC , Bonus, labour welfare cess (LWC) and contractor's overhead & profits etc as applicable. (iii) In case the rates quoted by tenderer are less than the notified minimum wages as on bid submission end date including all statutory provisions such as EPF, GST, ESIC, Bonus, labour welfare cess (LWC) and contractor's overhead & profits etc as applicable, his tender will be treated as non-bonafide and will not be considered for Acceptance. In such case, the lowest tender shall be determined amongst valid/bonafide bids only. (iv) The firm/contractor shall be solely and fully responsible to his reprsentative/personal for any accident/damage during maintenance/operation/health related liabilities/compensation, penelty etc on this account. (v) T&P required such as spanner set, wrench, screw driver set, testing lamp, drilling machine and multimeter, tong tester, megger etc as well as protective devices (shoes, helmet etc) shall be provided by the contractor at no extra cost.

(vi) Contractor shall be responsible to maintain log books, duty roster attendance register and spare for repair/renewal of parts register, earth register, serviceability register of lifts and as directed by Engr-in-charge. (vii) Shift Operator (reliever) shall neither leave the installations without prior permission of JE/Engineer-in-Charge. Proper handing/taking over to the next operator will be made. (viii) Two pairs of uniform with name plate of operator & firm and shoes shall be provided to each operator by the contractor. (ix) Cleaning of complete lift, machine room of lift, greasing, tightening of nuts , bolts will be carried out by the operator employed by the contractor. (x) First Aid box will be provided by contractor at each installation. (xi) Any increase in minimum wages of labour as fixed by the Govt of India/state Govt/ union Territory, whichever is higher shall be paid to the contractor in accordance with the provision made vide condition 63 of IAFW-2249. Increased wages including all other benefits in compliance of statutory provisions shall be paid to workers by the contractor. no other claim whatsoever shall be addmissible on this account and the bidders shall consider this aspect while quoting their rates. It must be noted that in compliance of the statutory provisions, the increased will be passed over to the workers. (xii) Any consumble item shall be issued by department free for fixing/filling. The contractor shall collect and transport the same from E/M store yard to the requisite installations within 24 Hours at his own cost and arrangement. Proper record for issue & receipt for this shall be maintained by the Engineer-in-Charge & contractor.

(xiii) The Contractor shall not pay wages lower than the latest notified minimum wages in force to their workmen/ tradesmen including all other benefits in compliance of statutory provisions. Bidders shall consider this aspect while quoting their rates. (xiv) Duty roster for detailement of operators shall be approved by Engr-in-charge within first three days of every month and the same shall be kept on record and properly displayed at each installation. (xv) The contractor will arrange the earth tester, Megger & clamp meter for installation and will check all the earthings of lifts for its serviceability in presence of JE E/M, Engr-in-Charge and test report shall be submitted to the office of AGE E/M duly signed by the contractor on commencement of work for record. (xvi) For any damage to the installations due to negligence of operator such as loose connections, improper routine check up/maintenance etc. the contractor shall be held fully responsible to replace the same damage at his own cost all as directed by Engr-in-charge. (xvii) Original certificates regarding qualifications of operators engaged in the work, police verification and identity proof shall be produced by the contractor to the Engineer-in-Charge for verification and approval.

PART-II: REPAIR/MAINT WORK Material and Labour for earthing complete with GI earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not less than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron strip of 25x4 mm by means of Copper nuts, bolts and washers. Strip laid in 40mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following complete all as specified and shown in electrical plate No 3 of SSR Part-I & testing on completion :- (a) GI strip of size 25mm x 4mm. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) Excavation & earthwork in any type of soil PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 50mm thick 1:2:4 type B1 reinforced with 8mm dia mild steel bar 75mm centre to centre with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover.

M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or any other indicated situation for loop earthing etc as required 25x4 mm galvanised iron strip complete all as specified and directed.

Supply and laying in repair GI pipe light grade in replecement of 50mm dia including fittings laid in trenches or under road crossing for protection of UG cable complete all as specified and directed.

Supply and laying in repair GI pipe light grade in replecement of 80mm dia including fittings laid in trenches or under road crossing for protection of UG cable complete all as specified and directed.

M&L for boring of holes under road, pavement, hard standing by trenchless techonology using ultra sound technique/mannually/mechanically and necessary machine including supply and laying of 100mm dia GI pipe light gradeincluding making necessary excavation upto 1.5 mtr deep on both side of road for making holes and inserting 100mm dia GI Pipe complete all as specified and directed.

S&F in repair MCCB 400 Amps four pole 415 volts 50 Hz ,breaking capacity 36 KA complete all as specified and as directed.

All as per item No. 10.00 above but of capacity 250A.

All as per item No. 10.00 above but of capacity 200A.

M&L for B check general servicing by authorised rep of manufacturer of DG set of capacity 100 KVA, replacement of oil filter, fuel filter, air filter, by pass filter cleaning of radiator with chemical after draining out engine/ lubrication oil, coolant flushing and cleaning of oil chamber after opening of tappet cover/ top cover tappet clearence setting with injector timing adjustment reaffixing of tappet/ top cover including replacement of tappet cover packing set, bonding and leak proof sollution, oil pan/ chamber gasket at the servicing and other work comes under B Check service as mentioned in B Check by the manufacturer all as speciied and as directed. Note-Engine oil & Coolant will be paid separately under respective item.

All as per Ser item No. 13.00 above but of capacity 200 KVA

All as per Ser item No. 13.00 above but of capacity 250 KVA

All as per Ser item No. 13.00 above but of capacity 320 KVA

All as per Ser item No. 13.00 above but of capacity 625 KVA

S&F in repair of self starter 12 V including rewinding of armature with super enamaled copper conductor wire of superier quality as per existing gauge, turn and pattern and replacement of bendex drive, carbon brush including services suitable for DG set 62.5 to 100 KVA.

All as per Ser item No. 17.00 above but 24V.

S&F in repair of automatic battery charger with auto cut OFF suitable for charging of 2X12V 180AH batteries with all required necessary wiring complete all as specified and directed.

S&F in repair of wiring complete to AMF panel for any capacity of DG set including interlock system of AMF panel with existing size of copper wiring including proper connection and testing complete all as specified and directed.

S&F in repair of self starter 24 volts suitable for upto 625 KVA DG sets complete all as specified and directed.

S&F in repair of battery brass terminals heavy duty suitable for 12V 180 AH battery with minimum 2 RM Battery Lead of 10 Sqmm multistranded copper Cable single core complete all as specified and directed.

S&F in repair of relay 24 V 8 pin type as per matching to existing complete all as specified and directed.

S&F in repair of engine starting relay suitable for DG set of capacity 62.5 KVA to 100 KVA as per matching to existing.

S&F in repair of engine starting relay suitable for DG set of capacity 200 to 625 KVA as per matching to existing.

S&F in repair of Electronic timer suitable for AMF panel of DG set as per matching to exisitng, 230 V AC 50 Hz..

S&F in repair of Voltmeter analog type for voltage range of (0-24V) as per matching to existing complete with all accessories and wiring complete all as specified and directed.

S&F in repair of Voltmeter analog type for voltage range of (0-500V) complete with all accessories and wiring complete all as specified and directed.

S&F in repair of Ammeter analog type for current range of (0-24Amps) as per matching to existing complete with all accessories and wiring complete all as specified and directed.

S&F in repair of Ammeter analog type for current range of (0-1000Amps) as per matching to existing complete with all accessories and wiring complete all as specified and directed.

S&F in repair of power contactor ML 6 suitable for AMF panel of DG sets as per matching to existing complete all as specified and directed.

S&F in repair of power contactor ML 4 suitable for AMF panel of DG sets as per matching to existing complete all as specified and directed.

S&F in repair of power contactor ML 3 suitable for AMF panel of DG sets as per matching to existing complete all as specified and directed.

S&F in repair of power contactor ML 2 suitable for AMF panel of DG sets as per matching to existing complete all as specified and directed.

S&F in repair of under voltage relay suitable for DG set .

S&F in repair of complete wiring with 2.5 Sqmm single core multistranded copper cable with flexible conduit for DG set of various capacities.

S&F Electronic Governor Controller for 200 to 320 KVA DG Set including taking down old Governor Controller and testing complete all as specified and directed.

S&F new actuator for upto 625 KVA DG Set complete including taking down old actuator complete all as specified and directed.

Opening the DG set of 200 to 250 KVA , repair to any leakage in radiator, greasing of all movable parts & equipments and replacing all flexible/steel wire mesh type hose pipes including fuel pipe line, belts & Bearings including re-assembling the complete Parts and Testing complete all as specified and as directed. Note: Spare parts required for replacement shall be measured and paid separately under respective item.

S&F Piston ring and liner for 200 to 250 KVA DG Set as per existing make & OEM complete.

Supply only Head valve, Head Guide, Head sheet & Head seal for 200 to 250 KVA DG Set as per existing make & OEM complete.

Supply only Injector sleeves & Head gasket for 200 to 250 KVA DG Set as per existing make & OEM complete.

Supply only Packing Kit for 200 to 250 KVA DG Set as per existing make & OEM complete.

Supply only Head and fuel injector assembly complete for 200 to 250 KVA.

Supply only Turbo assembly complete for 200 to 250 KVA.

Opening the DG set of 320 KVA , repair to any leakage in radiator, greasing of all movable parts & equipments and replacing all flexible/steel wire mesh type hose pipes including fuel pipe line, belts & Bearings including re-assembling the complete Parts and Testing complete all as specified and as directed. Note: Spare parts required for replacement shall be measured and paid separately under respective item.

Supply only Piston ring and liner for 320 KVA DG Set as per existing make & OEM complete.

Supply only Head valve, Head Guide, Head sheet & Head seal for 320 KVA DG Set as per existing make & OEM complete.

Supply only Injector sleeves & Head gasket for 320 KVA DG Set as per existing make & OEM complete.

Supply only Packing Kit for 320 KVA DG Set as per existing make & OEM complete.

Supply only Head and fuel injector assembly complete for 320 KVA.

Supply only Turbo assembly complete for 320 KVA.

S&F in repair fan belt of existing size for DG Set of capacity 62.5 to 160 KVA

S&F in repair fan belt of existing size for DG Set of capacity 200 to 320 KVA

Supply and Cladding with glass/rock wool and aluminium sheets of exhaust manifoldfor for DG sets 62.5 KVA includung removing of existing asbestos rope or any other type of insulation.

Supply and Cladding with glass/rock wool and aluminium sheets of exhaust manifoldfor for DG sets 70 KVA includung removing of existing asbestos rope or any other type of insulation.

Supply and Cladding with glass/rock wool and aluminium sheets of exhaust manifoldfor for DG sets 200 to 625 KVA includung removing of existing asbestos rope or any other type of insulation.

S&F in repair fly wheel ring of DG Set of capacity upto 75 KVA.

S&F in repair fly wheel ring of DG Set of capacity 200 to 320 KVA.

Draining out the diesel tank, cleaning/washing out the sludge and re-filling with diesel for the DG Set of capacity 62.5 to100 KVA.

Draining out the diesel tank, cleaning/washing out the sludge and re-filling with diesel for the DG Set of capacity 250KVA complete all as specified and directed.

All as sper ser item No. 51.00 above but capacity 320 KVA.

All as sper ser item No. 51.00 above but capacity 625 KVA.

Taking down radiator of 62.5 to 100 KVA DG set & M&L for repair arresting leakage if any by welding/brazing and refixing the same after repair complete all as specified and directed. Note: Necessary coolant and distilled water required will be measured and paid seperately.

All as sper ser item No. 54.00 above but 200 to 320 KVA DG set.

All as sper ser item No. 54.00 above but 625 KVA DG set.

S&F in repair lead acid battery of size 1X 12 Volt , 180 AH complete all as specified as directed. Make: Amaron/Exide/Luminous

Removing old unserviceable insulating material asbestos rope and fixing of new of existing size and shape complete all as directed

M&L for spray painting of diesel generating set of capacity 62.5 to 100 KVA with accostic enclosure/ open type with one coat of synthetic enamel paint, body colour shall be apply green,black for foundation base frame, red for all guards complete all as specified and directed.

All as per ser item No. 59.00 above but capacity 200 to 250 KVA.

All as per ser item No. 59.00 above but capacity 320 KVA.

All as per ser item No. 59.00 above but capacity 625 KVA.

S&F in repair of ARD Battery for lifts 12 Volts 7 AH complete all as specified and directed.

S&F in repair of SWR Rope 13 MM dia & existing length for lifts complete all as specified and directed.

S&F in repair of 4 Pole MCCB, 160 Amp, 36 KA with microprosseor release and Adjustable overload setting, 50 Hz, 415 V complete all as specified and directed.

S&F in repair of 4 Pole MCCB, 100 Amp, 36 KA with microprosseor release and Adjustable overload setting, 50 Hz, 415 V all as specified.

S&F in repair of recessed mounted deep recessed adjustable down light 6 watt complete all as specified and directed. Make: Cat No. BRDCSL 6W WH of make Bajaj or Equivalent make/Model as per appendix 'B'

Pradeep Bros

BRIJ MOHAN LAL AND CO.

M/s Wazer Enterprises