Karnataka

Active

Works

Buildings

Construction of workshop/laboratory room in govt model primary school Nandikeshwar,in Badami taluk

Rural Development and Panchayat Raj Department

RDPR Division Office Bagalakote | Bagalkot, Karnataka

Amount: ₹28.5 LCloses: 21 Jul 2026

Tender Value

₹28.5 L

EMD Value

₹48,350

Closing Date

21 Jul 2026, 11:00 pm

Tender Inviting Organisation

Name

Rural Development and Panchayat Raj Department

Work Description

Construction of workshop/laboratory room in govt model primary school Nandikeshwar,in Badami taluk

Tender Information

Tender ID

RDPR/2026-27/BD/WORK_INDENT27618

Reference Number

RDPR/2026-27/BD/WORK_INDENT27618

Tender Type

Open

Product Category

Buildings

Location

RDPR Division Office Bagalakote

Source Website

Subscribe to view

Documents Required

8 documents required · 8 mandatory

Technical Bid

RequiredPRED/KPWD CLASS-III AND ABOVE Registration Certificate

RequiredTenderer must Submit PAN & GST Certificate

RequiredTenderer must have of value 2021-22, 2022-23 2023-24, 2024-25 & 2025-26 satisfactorily completed as a prime contractor at least one Similar nature of work/Cost of Building work of 50 PERCENT of the Amount Put to Tender 50 Percent of not less than Rs.12.09 lakhs issued by the officer not below the rank of Executive Engineer For Similar nature/BUILDING works work done certificate with works should be produced Work done with indent No

RequiredWork orders / commitments of ongoing works issued by an officer not below the rank of Executive Engineer

RequiredTo qualify for award of this contact each tenderer in his name should have in the 2021-22 to 2025-26 years period achieved in at least two financial years an average financial turnover of Rs.24.17 Lakhs usually not less than amount put to tender from C.A. on Letter Head with UDIN No. otherwise bid will be directly disqualified

RequiredAccurate postal address and phone / cell phone number

RequiredTenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity A X N X 2.5 - B

RequiredContractor should submit / upload the difference amount as per the CSR 2025-26 in FDR

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Department Registration Details

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing work

List of works for which tenders already submitted

Banker Details

The Tenderer shall obtain the workdone certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer(District Level Officer)and scan the Original Certificate and attach the scanned file to the Bid.

All the documents to be uploaded shall be neatly scanned and the documents scanned shall be in original.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders The departments shall not be responsible for non accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end

All materials required for the work shall be procured by the tenderer himself and should be got tested by the quality control authorities at his own cost before use on work.

Acceptence / Cancellation of the works are reserved by under signed without any reasons for the same.

If any date in the tender time table is government holiday, next working date will be considered

Incomplete / conditional tenders will not be accepted.

Tenderer must submit his present accurate postal address and phone / cell phone number

The cost of the Tender form shall not be refundable.

Unique Document Identification Number (UDIN) from Practicing Chartered Account Must Preferred

Work shall be executed as per KTPP Act & KW-1&2 Conditions.

The Rates Quoted In The Estimates Are Exclusive of GST Taxes.

The GST will be Paid Separately to the Contractors as per the Guidelines of the Government Time to Time.

Successful bidder submitting bids below the amount put to tender will be regularized to submit the difference amount in the form of FDR/TDR/DD/Pledge on the name of EE PRED Bagalkote within 20 days from the date of receiving the letter of acceptance. additional security paid for unbalanced tenders Failing which EMD will be forfeited and further action will be taken as per G O No FD PCL 2008 Bangalore Dated 14/10/2008.

As per Government order No. FD 56 PWD cell 2004, Bngalore, 18th Janury 2005, The contractor shall be made responsible for submiting e-bills duly suported the hard copy of detailed measurements of work. using electrinic spreadsheets and making computation thereof. The conctractor shall submit diskette/ CD room in addition the hard copy.

The tenderers must submit the scanned documents in pdf / jpeg form, not in other form and which are should not be corrupted files. If it shows errors while opening the documents the employer is not responsible. Hence the such files will be considerd as un submitted.

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2021-22 2022-23 2023-24 & 2024-25 2025-26 Achieved in at least two financial years a minimum financial turnover in all classes of civil engineering construction works only of Amount Put Tender (Turn over With compulsory UDIN Number) (in all classes of civil engineering construction works only

The Tenderer shall obtain similar the workdone certificate Construction of Similer nature Works within the financial years of 2021-22 to 2025-26 (50% of the Amount Put to Tender) i.e in the prescribed format from the Competent Authority not below the rank of Executive Engineer(District Level Officer) and scan the Original Certificate and attach the scanned file to the Bid.

This work is Randomized as OTHERS Category. Hence any Category of Contractor can bid.

Tenderers must have valid PRED/PWD registration CLASS-3 AND ABOVE and must submit PRED/PWD registration copy.

Single Tender Will Not Be Accepted

NOTE : ONLY RELEVANT SCANNED COPY OF THE ORIGINAL DOCUMENT TO BE ATTACHED FOR THE CORRESPONDING CONDITIONS MENTIONED.

Period for completion of work is 5 Months

The Project Completion period is 5 Months and the defect liability period of the work is (2) TWO year after successful completion of the work. (including Monsoon).

Tenderer must submit copies of documents according to KW-1&2 document

Lot No:13581 Sl No 04 Others

Videography and photographs in three stages should be taken and submitted along with the bill before starting, during execution and after completion of work in the presence of the section officer

All materials including complete with all lead and lift and as per the direction of Engineer in charge of work

All materials shall be of good quality as per specification, quality certificate for the same should be obtained from the concerned authority at their own cost.

The work subjected to third party inspection and inspection by other govt agencies third party inspection cost is borne by the contractor at the rate of 0.5% of the gross amount of the bill third party agency is appointed by the dept

After Completion of Work Third Party/SQM/DQM Inspection Reports Submitt with the Bills

The work shall be inspected by the Third Party and the bill shall be admitted only after the satisfactory quality reports from the Third Party.

It is to be noted that any false documentation found to be uploaded, action may attract punitive measures such as Blacklisting, Cancellation of Registration etc.

Work Locations

Fee & Financial Details

Tender Fee Amount

₹720

EMD Fee Amount

₹48,350

Important Dates

Last Activity

8 Jul 2026

Published

8 Jul 2026

Download Ends

20 Jul 2026

BOQ Preview

•

Construction of workshop/laboratory room in govt model primary school Nandikeshwar,in Badami taluk

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per d...

•

Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour wit...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

•

Vol-I appendixI- Additionalities for Formwork centering and scaffolding 8%

•

Vol-I appendixI- Additionalities for Formwork centering and scaffolding 70%

•

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Vol-I appendixI- Additionalities for Formwork centering and scaffolding 70%

•

Vol-I appendixI- Additionalities for Formwork centering and scaffolding 60%

•

Vol-I appendixI- Additionalities for Formwork centering and scaffolding 60%

•

Vol-I appendixI- Additionalities for Formwork centering and scaffolding 50%

•

Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacen...

•

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) inc...

•

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mo...

•

Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mix...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

•

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved stee...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3 mm M.S. gusset plates at the junctions andcorners, all necessary fittings complete, including applying a priming...

•

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete ...

•

Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with, stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per d...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth c...

•

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...

•

polyurethane based single Component for Existing surface Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dis...

•

Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete.

•

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 ...

•

Providing & fixing 100% Polyester Curtains with specification of regular wash as per direction of Engineer in charge.

•

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Providing & fixing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced w...

•

Supplying heavy gauge PVC conduit pipe 19/20mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and...

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC ...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.

•

Supplying & Fixing of 230 V 20/40 W Fluorescent Lamp holder

•

Supplying of .....feet -PVC Batten with integrated LED tube 20W with high quality diffuser with Life of 25000 burnin hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power ...

•

Supplying exhaust fan of 1440 RPMof 300mm(12") sizewith bracket blades complete for light duty suitable tooperateon230V50Hz, AC Supply.l

•

Supplying ......TRsplit Air conditioners suitable for operationon A/C supply single phase 50Hz 230V with hermetically sealed compress or with air cooled condenser,motor capacitorand start run capacito...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KPPP-kw-2-27618.doc

Tender Document • 2.56 MB

Ready to Participate?

Download all tender documents and submit your bid