Loading
Loading…
Loading…
Tender Value
₹5.0 L
EMD Value
₹9,967
Closing Date
25 Sept 2026, 11:30 am4d left
Er Naveen Khatri
Xen CP2 Road Sector 9 Chd
Patch Work and Repair of Pothholes on various Roads under C12 Sub Division Chandigarh
2026_CHD_95388_1
CP2Road3081258
Open Tender
Civil Works - Roads
Percentage
30 days
Chandigarh
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹9,967
25 Sept 2026
11 Sept 2026
25 Sept 2026
11 Sept 2026
25 Sept 2026
11 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and laying tack coat with bitumen VG-10 @ 3.0 kg/10 sqm using sprayer pump on prepared surface heating bitumen in boiler and spraying bitumen with spray set fitted on bitumen boiler including cleaning of road surface with complete in all respect as per MORT&H specification and to the entire satisfaction of the Engineer-in-charge. | 850 | Sqm | 34.2 | ₹29,070 |
| 2 | Providing and laying type 3 (6-8 mm) 7 mm Avg. thick SLURRY SEAL with mechanical paver after mixing aggregate and bitumen as per design mix in Hot mix plant using maximum 7.5 % bitumen VG-30 and using fine aggregate with 2 % filler to the weight of aggregate confirming to relevant specification laid in MORTH&H specification and density of bituminous concrete as laid 1.71 gm/cc & to the entire satisfaction of Engineer-in-Charge | 100 | Sqm | 140.3 | ₹14,030 |
| 3 | Providing and laying 30mm thick bituminous concrete as per clause 507 of MORT&H specification with mechanical paver after mixing aggregate and bitumen as per design mix in Hot mix plant using minimum 5.4% bitumen of grade VG- 30 and using both coarse and fine aggregate filler stone dust @2% by weight of aggregate confirming to relevant specification laid in MORT&H specification clause 507.2.2 and 507.2.3 with grading confirming to table 500.17 gradation –II of MORT&H specification and density of bituminous concrete as laid 2.35 gm/cc complete in all respect as per MORT&H specification and to entire satisfaction of Engineer-in-charge. | 15 | Cum | 16,368.05 | ₹2,45,520.75 |
| 4 | Providing and laying 50 mm thick dense graded bituminous macadam with mechanical paver after mixing aggregate and bitumen as per design mix in hot mix plant using minimum @ 4.75% bitumen of grade VG-30 of total mix with aggregate confirming to requirement laid in table 500.8 and as per grading II specified in table 500.10 complete as per clause no. 507 of MORT&H specification rolling with smooth wheeled vibratory and tandem roller as per clause 501.6 and 501.7 to achieve the desired density 2.3gm/cc. complete in all respect and to the entire satisfaction of the Engineer-in-charge. | 15 | Cum | 13,982.79 | ₹2,09,741.85 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 6.98 MB
Tendernotice_2.pdf
PDF • 2.02 MB
BOQ_117165.xls
BOQ • 0.24 MB
PatchworkCorrr.pdf
PDF • 0.10 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .