Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.0 LAccepted-AOC DARJEELING DHOTREY FOREST BANSBOTAY DARJEELING P S DARJEELING DHOTREY FOREST BANSBOTAY DARJEELING P S DARJEELING DARJEELING WEST BENGAL 734201 | DARJEELING | WEST BENGAL | 734201 | L1 | Accepted-AOC RATES ARE FOUND REASONABLE AND THE FIRM BEING L1 BIDDER | |
| 2 | L2₹11.0 L+₹70,258.77 (6.84%)Rejected-Finance | L2 | Rejected-Finance BEING L2 BIDDER | |
| 3 | L3₹11.4 L+₹1.1 L (10.8%)Rejected-Finance | L3 | Rejected-Finance BEING L3 BIDDER | |
| 4 | L4₹11.4 L+₹1.1 L (10.8%)Rejected-Finance | L4 | Rejected-Finance BEING L4 BIDDER | |
| 5 | L5₹11.9 L+₹1.6 L (15.7%)Rejected-Finance | L5 | Rejected-Finance BEING L5 BIDDER |
| Sl No | Description | Qty | Unit | Darjeeling Enterprises L6 | JALAPAHAR HARDWARE L7 | SANJAY KAUSHIK L8 | REEMA TAMANG AND SONS L1 | BHASKAR PRADHAN L3 | THUKKEPA & PANGDOK L5 | RAI CONSTRUCTION L2 | TSHERING WANGYAL BHUTIA L4 | YADAV CHETTRI L9 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Excavation in post holes (or similar holes) each n.exc 0.5cum in soft/loose soil and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing of surplus soil to a distance n.exc 50 meters and making good surface, complete all as per specified and as directed by Engineer-in-charge. | 32 | Each | 312 ₹9,984 | 302 ₹9,664 | 335 ₹10,720 | 265 ₹8,480 | 270 ₹8,640 | 280 ₹8,960 | 200 ₹6,400 Lowest | 294 ₹9,408 | 335 ₹10,720 |
| 2.00 | M&L for PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases), complete all as per specified and as directed by Engineer-in-charge. | 2.5 | Cum | 9,600 ₹24,000 | 9,800 ₹24,500 | 8,975 ₹22,437.5 | 8,650 ₹21,625 | 8,790 ₹21,975 | 9,765 ₹24,412.5 | 8,000 ₹20,000 Lowest | 9,004 ₹22,510 | 9,700 ₹24,250 |
| 3.00 | S&F MS steel work in tubular trusses including special shaped washers etc., complete using ERW or induction butt welded tubes confirming to IS 1161- 1979 graded St 240, complete all as per specified and as directed by Engineer-in-charge. | 2,570 | Kg | 235 ₹6,03,950 | 260 ₹6,68,200 | 366 ₹9,40,620 | 181 ₹4,65,170 Lowest | 215 ₹5,52,550 | 219 ₹5,62,830 | 195 ₹5,01,150 | 202 ₹5,19,140 | 400 ₹10,28,000 |
| 4.00 | Dismantling of plain or corrugated steel of any gauge & thickness from roof, gutter etc incl Nainital or similar pattern roof coverings, complete all as specified and as directed by Engineer-in-charge. | 226.3 | Sqm | 55 ₹12,446.5 | 53 ₹11,993.9 | 50 ₹11,315 | 29 ₹6,562.7 Lowest | 37 ₹8,373.1 | 45 ₹10,183.5 | 73 ₹16,519.9 | 34 ₹7,694.2 | 32 ₹7,241.6 |
| 5.00 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J hooks, complete all as specified and as directed by Engineer-in-charge. | 201.3 | Sqm | 1,680 ₹3,38,184 | 1,730 ₹3,48,249 | 1,651 ₹3,32,346.3 | 1,530 ₹3,07,989 | 1,560 ₹3,14,028 | 1,650 ₹3,32,145 | 1,550 ₹3,12,015 | 1,680 ₹3,38,184 | 1,529 ₹3,07,787.7 Lowest |
| 6.00 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J hooks, complete all as specified and as directed by Engineer-in-charge. | 25 | Sqm | 1,890 ₹47,250 | 1,777 ₹44,425 | 1,530 ₹38,250 | 1,410 ₹35,250 Lowest | 1,499 ₹37,475 | 1,760 ₹44,000 | 1,450 ₹36,250 | 1,608 ₹40,200 | 1,450 ₹36,250 |
| 7.00 | S&F Mild steel flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, wind ties, clamps and similar small articles etc. conforming to Fe-290 Gde E-165, complete all as per specified and as directed by Engineer-in-charge. | 15 | Kg | 267 ₹4,005 | 263 ₹3,945 | 245 ₹3,675 | 175 ₹2,625 Lowest | 195 ₹2,925 | 218 ₹3,270 | 185 ₹2,775 | 202 ₹3,030 | 197 ₹2,955 |
| 8.00 | M&L for preparation of new or previously untreated steel or iron surface of any description and applying two coats of synthetic enamel paint over a coat of red oxide, primer over 10cm width or girth complete all as specified and as directed by Engineer-in-charge. | 60 | Sqm | 190 ₹11,400 | 210 ₹12,600 | 235 ₹14,100 | 160 ₹9,600 Lowest | 170 ₹10,200 | 189 ₹11,340 | 198 ₹11,880 | 212 ₹12,720 | 190 ₹11,400 |
| 9.00 | Dismantling Unframed timber scantlings 40 Sqcm and over in section and in any position, complete all as specified and as directed by Engineer-in-charge. | 1.9 | Cum | 880 ₹1,672 | 900 ₹1,710 | 1,000 ₹1,900 | 849 ₹1,613.1 Lowest | 923 ₹1,753.7 | 910 ₹1,729 | 970 ₹1,843 | 933 ₹1,772.7 | 888 ₹1,687.2 |
| 10.00 | M&L for 2nd class HW as in scantlings timber fixed work clean sawn, complete all as specified and as directed by Engineer-in-charge. | 0.1 | Cum | 1,10,000 ₹11,000 | 1,10,055 ₹11,005.5 | 1,05,100 ₹10,510 | 95,700 ₹9,570 Lowest | 98,765 ₹9,876.5 | 99,000 ₹9,900 | 1,00,675 ₹10,067.5 | 97,100 ₹9,710 | 96,543 ₹9,654.3 |
Tender Value
₹9.7 L
EMD Value
₹19,320
Closing Date
13 Sept 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I DARJEELING
AGE I DARJEELING JALAPAHAR CANT DIST - DARJEELING
REPLACEMENT OF COVERED PATHWAY SHED AND OLD IRON SHEETS AT BLDG NO. P-13 AT LEBONG UNDER AGE (I) DARJEELING
2025_MES_727380_1
8180/E8
Open Tender
Civil Works
Item Rate
180 days
LEBONG
AS PER NIT
9 documents required · 9 mandatory
₹500
AGE I DARJEELING
₹19,320
Yes
27 Sept 2025
22 Aug 2025
15 Sept 2025
22 Aug 2025
13 Sept 2025
6 Sept 2025
Amount
Excavation in post holes (or similar holes) each n.exc 0.5cum in soft/loose soil and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing of surplus soil to a distance n.exc 50 meters and making good surface, complete all as per specified and as directed by Engineer-in-charge.
M&L for PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases), complete all as per specified and as directed by Engineer-in-charge.
S&F MS steel work in tubular trusses including special shaped washers etc., complete using ERW or induction butt welded tubes confirming to IS 1161- 1979 graded St 240, complete all as per specified and as directed by Engineer-in-charge.
Dismantling of plain or corrugated steel of any gauge & thickness from roof, gutter etc incl Nainital or similar pattern roof coverings, complete all as specified and as directed by Engineer-in-charge.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J hooks, complete all as specified and as directed by Engineer-in-charge.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J hooks, complete all as specified and as directed by Engineer-in-charge.
S&F Mild steel flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, wind ties, clamps and similar small articles etc. conforming to Fe-290 Gde E-165, complete all as per specified and as directed by Engineer-in-charge.
M&L for preparation of new or previously untreated steel or iron surface of any description and applying two coats of synthetic enamel paint over a coat of red oxide, primer over 10cm width or girth complete all as specified and as directed by Engineer-in-charge.
Dismantling Unframed timber scantlings 40 Sqcm and over in section and in any position, complete all as specified and as directed by Engineer-in-charge.
M&L for 2nd class HW as in scantlings timber fixed work clean sawn, complete all as specified and as directed by Engineer-in-charge.
Dismantling boarding, any description fixed in any position with nails, complete all as specified and as directed by Engineer-in-charge.
S&F 20mm thick 2nd class hardwood planed one side with butt joints as in shelves of cupboards, racks and pelmets, eaves board and skirting work fixed with nails, complete all as specified and as directed by Engineer-in-charge.
S&F 25mm thick 2nd class hardwood weather boarding planed one side with butt joints as in roof, ceilings, partitions, facia, barge etc., complete all as specified and as directed by Engineer-in-charge.
M&L for one coat of anti-corrosive synthetic enamel paint to old steel surfaces as on roof of any description over 10cm width or girth including preparation of surfaces, complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of new or previously untreated wood or wood based surfaces of any description, exceeding 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed by Engineer-in-charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as per specified and as directed by Engineer-in-charge.
M&L for 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes, complete all as specified and as directed by Engineer-in-charge.
M&L for factory made precast Coloured chequrered cement concrete coloured tiles 30cm x 30cm x 25mm thick, set jointed and pointed in neat cement slurry in floor as in floor, paving and steps etc with grey cement and pigments complete all as specified and as directed by Engineer-in-charge.
Demolition of brick work built in any cement mortar complete all as specified and as directed by Engineer-in-charge.
M&L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in in CM (1:6), complete all as specified and as directed by Engineer-in-charge.
Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed by Engineer-in-charge.
M&L for 15mm thick in two layer (10 mm and 5 mm thick) rendering on fair faces of brick work or concrete surface in CM 1:4, mixing with water proofing compound @ 3% by weight of cement consumed and surface finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge. Note :- WPC shall be measured and paid separately.
Supply only integral water proofing compound confirming to IS complete all as per specified and as directed by Engineer-in-charge.
M&L for MS flat (40x3mm) wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed by Engineer-in-charge.
S&F PVC (SWR) half round gutter drain pipe 180mm bore, complete all as specified and as directed by Engineer-in-charge.
S&F 180mm PVC (SWR) joint socket as in gutter drain pipe, complete all as specified and as directed by Engineer-in-charge.
S&F 180mm PVC (SWR) joint tee as in gutter drain pipe, complete all as specified and as directed by Engineer-in-charge.
S&F 180mm PVC (SWR) joint tee with end cap as in gutter drain pipe, complete all as specified and as directed by Engineer-in-charge.
S&F PVC (SWR) pipe single socketed in any length fixed to wall 110mm bore with rubber ring joint, complete all as specified and as directed by Engineer-in-charge.
S&F PVC (SWR) bends 110mm bore (any radius), complete all as specified and as directed by Engineer-in-charge.
M&L for preparing new plastered surfaces and applying two coats of cement based paint on walls over a coat of alkali resistant primer, complete all as per specified and as directed by Engineer-in-charge. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.
RAI CONSTRUCTION (BID ID -3424320)
BHASKAR PRADHAN (BID ID -3422639)
TSHERING WANGYAL BHUTIA (BID ID -3420833)
THUKKEPA & PANGDOK (BID ID -3424088)
Darjeeling Enterprises (BID ID -3420589)
JALAPAHAR HARDWARE (BID ID -3421451)
SANJAY KAUSHIK (BID ID -3423293)
YADAV CHETTRI (BID ID -3424634)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .