Construction of DPRC Kinnaur at Kalpa ( SH Electrical installation Complete )

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C.

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit, with 2-way modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C.

S/E of LED Downlighter round type surface with CRCA/PDC body and diffuser The fitting should be installed on existing surface The job includes carriage, erection, making connections testing and commissioning of the fittings.

LED Downlight 12 WH

LED Downlight 20/24 WH

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes with 8 bar pressure rating Five star BEE rating and safety valve installation by means of expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, making good the damages, electrical connections, testing etc. complete as required:-

25 Liter capacity water heater (Cat-A)

S/E of LED Batten IP 65/66 with IK06-08 protection industrial with extruded aluminium housing The fitting should be installed on existing surface The job includes carriage, erection, making connections testing and commissioning of the fittings.

LED Batten Light 36/40 Watt.

Providing and installation of Decorative wall light fixture SPARKLER WL 1LS E27 BRS BL PC Minimalistic design of wall lights without shade in different finish and design in E27 base Recommended to use with energy saving filament lamps for indoor applications, complete with all accessories, including making connections, testing and commissioning etc and including LED Lamp. as required. Make: Havells or any other approved by Engineer-in-Charge

Decorative wall light fixture

Supply, Installation, Testing and Commissioning of following sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.85, Air delivery minimum 215 CMM, 300 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote/ BLDC electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Ceiling Fan 1400 mm sweep

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Installation of ventilatinmg /exhaust fan in the existing opening, including making good BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor the damage, connection, testing, commissioning etc. as required.Supply & Erection of Ventilating Fan ) following size complete with motor,, with minimum power consumption, rigid frame with rubber mounting for silent operation, in the existing opening including cost of making the hole to suit the size of above fan making good the damage, Carriage Charges connection, testing, commissioning etc. as required to complete the job to the entire satisfaction of EIC.

Exhaust Fan, 250 mm sweep

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole 6 Amp. Cat-A.

Single pole 16 Amp. Cat-A.

Single pole 25 Amp. Cat-A.

Supplying and fixing following rating, followings poles 10ka 240/415v 'C' curves miniature circuit braker suitable for inductive load of following poles in the exsisting MCB DB complete with connections, testing and commissioning etc. as required.

Double pole. 63 Amp. Cat-A.

Supplying and fixing following rating, follwing pole, (single phase and neutral), 240/415 V( four pole ), residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

63 Amps. Cat-A.

Supplying and fixing following way, TPN Distribution Board, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3, IK 08-for single door DBs, IK 09-for double door DBs, Available in CRCA sheet steel, RAL 9003, powder coated, Ready to use DBs - Provided with 100A insulated phase & neutral bus-bars with shroud/s, earth bar/s, sticking saddles, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit, identification labels, With provision for FP MCB/Isolator/RCCB/RCBO as incomer and SP MCBs as outgoings TPN MCB distribution board on surface/ recess, complete including earthing etc. as required. (But without MCB/RCCB/Isolator)

20 way (8+60), TPN DB Double door

Supplying & erection of Indoor floor mounted Type Main L.T. Panel having approx. size: 1850(W)x1200+300(D)x600(D)mm, suitable for Indoor applications, having 1 No. Main Incomer MCCB-4P 400 Amp. 36KA with thermal magnetic release O/L & S/C protection, Digital VAF Metering showing voltage,current frequency with suitable C.T., R-Y-B Indicating lamp (L&T) with seprate controling MCB SP 6 amp., suitable Busbar, Outgoing 6 No. MCCB 4P 100 Amp. 25ka complete, fabricated with 16-SWG CRCA sheet compartmentalized type enclosure, IP:42 indoor protection powder coating shade: RAL 9002-Siemens Grey as per design & drawing including the cost of all accessories, making connections, testing and commissioning etc. as required to the best satisfaction fo Engineer-in-Charge.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

4 X 4 sq. mm + 2 X 4 sq. mm earth wire

4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required.

Armoured cable 25 sq. mm (3.5 core)

Armoured cable 70 sq. mm (3.5 core)

Armoured cable 95 sq. mm (3.5 core)

S/E of LED Street Light IP 66 rated with aluminium body/PDC housing.The job includes carriage, erection, making connections testing and commissioning of the fittings.

Street Light 45 Watt IP-66

Supplying and erection of street light bracket made of G.I. pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required.

street light bracket 40 mm dia. G.I. pipe, heavy class

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.