Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.2 CrAccepted-AOC H NO F 301 LADO SARAI SOUTH DELHI DELHI 110030 | DELHI | SOUTH DELHI | DELHI | 110030 | ₹20.2 Cr | L1 | Accepted-AOC L1 |
| 2 | Rejected-Technical | - | - | Rejected-Technical NOT PASSED IN TECHNICAL EVALUATION |
| Sl No | Description | Qty | Unit | Z-Tech India Private Limited L1 |
|---|---|---|---|---|
| 1.01 | Vasudev escape - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 12 feet. Minimum Width – 10 feet. Minimum Length – 15 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge | 1 | Nos | 18,44,730 ₹18.4 L |
| 1.02 | ek kathin yatra - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 20 feet. Minimum Width – 15 feet. Minimum Length – 25 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge | 1 | Nos | 21,43,230 ₹21.4 L |
| 1.03 | Putna ka vadh - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 12 feet. Minimum Width – 10 feet. Minimum Length – 12 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge | 1 | Nos | 23,67,105 ₹23.7 L |
| 1.04 | Shaktasur ka vadhh - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 12 feet. Minimum Width – 12 feet. Minimum Length – 20 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge | 1 | Nos | 20,43,730 ₹20.4 L |
| 1.05 | Bavandar ka vadhh - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 10 feet. Minimum Width – 10 feet. Minimum Length – 10 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge | 1 | Nos | 17,45,230 ₹17.5 L |
| 1.06 | sansaar ke swami - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 10feet. Minimum Width – 8 feet. Minimum Length – 12 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge | 1 | Nos | 13,72,105 ₹13.7 L |
| 1.07 | Daamodar leela- minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 10 feet. Minimum Width – 8 feet. Minimum Length – 12 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge | 1 | Nos | 13,72,105 ₹13.7 L |
| 1.08 | Krishna ka makhan khana- minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 15 feet. Minimum Width – 7 feet. Minimum Length – 8 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge | 1 | Nos | 17,45,230 ₹17.5 L |
| 1.09 | bakasur ka vadh- minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 20 feet. Minimum Width – 20 feet. Minimum Length – 20 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge | 1 | Nos | 27,40,230 ₹27.4 L |
| 1.10 | vyomasur ka vadhh- minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 12 feet. Minimum Width – 10 feet. Minimum Length – 20 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge | 1 | Nos | 23,42,230 ₹23.4 L |
Tender Value
Refer Docs
EMD Value
₹10 L
Closing Date
5 Dec 2025, 3:00 pmClosed
C.E. CIVIL
NNMV
Design, Engineering and Development of Waste to Wonder Park (Krishna-Lok Park, Theme Park) on Revenue Share Model for 20 Years at Mathura
2025_DOLBU_1068354_3
NNMV/41/NNMV/2025-26
Open Tender
Civil Works
NNMV
Please refer Tender documents.
2 documents required · 2 mandatory
₹11,800
₹10 L
21 May 2026
15 Nov 2025
6 Dec 2025
15 Nov 2025
5 Dec 2025
15 Nov 2025
Amount
Vasudev escape - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 12 feet. Minimum Width – 10 feet. Minimum Length – 15 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
ek kathin yatra - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 20 feet. Minimum Width – 15 feet. Minimum Length – 25 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
Putna ka vadh - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 12 feet. Minimum Width – 10 feet. Minimum Length – 12 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
Shaktasur ka vadhh - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 12 feet. Minimum Width – 12 feet. Minimum Length – 20 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
Bavandar ka vadhh - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 10 feet. Minimum Width – 10 feet. Minimum Length – 10 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
sansaar ke swami - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 10feet. Minimum Width – 8 feet. Minimum Length – 12 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
Daamodar leela- minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 10 feet. Minimum Width – 8 feet. Minimum Length – 12 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
Krishna ka makhan khana- minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 15 feet. Minimum Width – 7 feet. Minimum Length – 8 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
bakasur ka vadh- minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 20 feet. Minimum Width – 20 feet. Minimum Length – 20 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
vyomasur ka vadhh- minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 12 feet. Minimum Width – 10 feet. Minimum Length – 20 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
asdhasur ka vadh - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 10feet. Minimum Width – 8 feet. Minimum Length – 10 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
Bhagwan brahma ki maya- minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 9 feet. Minimum Width – 20 feet. Minimum Length – 30 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
chack lila - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 8 feet. Minimum Width – 15 feet. Minimum Length – 18 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
bhrama ji ka anhakar - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 10 feet. Minimum Width – 6 feet. Minimum Length – 8 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
Dhenukasaur ka vadh - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 12feet. Minimum Width – 20 feet. Minimum Length – 20 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
Kaliya Naag - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 25 feet. Minimum Width – 12 feet. Minimum Length – 20 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
Gopi leela - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 20 feet. Minimum Width – 40 feet. Minimum Length – 40 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
Raas leela - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 9feet. Minimum Width – 60 feet. Minimum Length – 60 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
Radha krishna prem - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 10 feet. Minimum Width – 8 feet. Minimum Length – 10 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
Keshi ka vadh - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 12 feet. Minimum Width – 8 feet. Minimum Length – 16 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
RAAKSHAS SAAND - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 16feet. Minimum Width – 10 feet. Minimum Length – 20 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
GOVARDHAN PARVAT - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 25 feet. Minimum Width – 25 feet. Minimum Length – 30 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
DHANUSH KA TODNA -minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 20 feet. Minimum Width – 20 feet. Minimum Length – 40 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
RAJ HATHI KA VADH - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 15 feet. Minimum Width – 10 feet. Minimum Length – 25 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
MALYUDH- minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 25 feet. Minimum Width – 20 feet. Minimum Length – 50 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
KANS KA VADH - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 25 feet. Minimum Width – 20 feet. Minimum Length – 50 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
JARASANDH SE LADAI - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 25 feet. Minimum Width – 20 feet. Minimum Length – 50 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
KUBJHA - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 10 feet. Minimum Width – 10 feet. Minimum Length – 15 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
DWARKA CITY - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 15 feet. Minimum Width – 10 feet. Minimum Length – 25 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
RUKMANI KE SATH HOLI KHELETE HUE - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 10 feet. Minimum Width – 20 feet. Minimum Length – 30 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
RISHI DURVASA KE SATH DIVYA BHENT - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 10 feet. Minimum Width – 8 feet. Minimum Length – 15 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
DRAUPATI KA CHEERHARAN - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 20 feet. Minimum Width – 20 feet. Minimum Length – 40 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
ARJUNA KE SARTHI - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 22 feet. Minimum Width – 20 feet. Minimum Length – 32 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
BHISHMA PITHMAHA - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 10 feet. Minimum Width – 10 feet. Minimum Length – 15 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
BARBARIK - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 10feet. Minimum Width – 8 feet. Minimum Length – 15 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
GHATOGACH KA VADH - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 18 feet. Minimum Width – 10 feet. Minimum Length – 25 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
KARAN KA VADH - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 18 feet. Minimum Width – 12 feet. Minimum Length – 25 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
ASHWATHAMA KA SHARRAP - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 12 feet. Minimum Width – 8 feet. Minimum Length – 15 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
DUROYADHAN KA VADH - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 15 feet. Minimum Width – 10 feet. Minimum Length – 15 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
KRISHNA KA DIVYA LOK LAUTNA - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 9 feet. Minimum Width – 8 feet. Minimum Length – 15 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
VIRAT ROOP - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 30 feet. Minimum Width – 10 feet. Minimum Length – 15 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
GEETA UPDYNAESH PILLARS- minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 10 feet. Minimum Width – 3 feet. Minimum Length – 50 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
BHAGWAN KRISHNA KA PANKH - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 8 feet. Minimum Width – 8 feet. Minimum Length – 12 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
BHAGWAN KRISHNA KE GAYE - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 8 feet. Minimum Width – 8 feet. Minimum Length – 12 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
BHAGWAN KRISHNA KA JHULA - minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 8 feet. Minimum Width – 6 feet. Minimum Length – 10 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
MAAKHAN KA MATKA- minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 8 feet. Minimum Width – 8 feet. Minimum Length – 10 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
BHAGWAN KRISHNA KE BASURI- minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 5feet. Minimum Width – 30 feet. Minimum Length – 50 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
PEACOCK JHULA- minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 5feet. Minimum Width – 30 feet. Minimum Length – 50 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
BUTTER POT CLIMBING STRUCTURE- minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 12 feet. Minimum Width – 3 feet. Minimum Length – 4 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
FLUTE SHAPED SLIDE- minimum area as per below details, using the scrap/waste material available at the sites . Minimum Height – 10 feet. Minimum Width – 8 feet. Minimum Length – 25 feet. Foundation/Base Specs if requires–Brickwork all around the platform as a base for the platform on which installation shall be placed PCC below the concrete slab RCC M - 25 if required. with Vacuum Dewatering External Pavers / Stone Tiles on top of RCC Slab, if required. Designing, Fabrication,Installation of to be made from Scrap/waste material. The miniatures/sculpture/structures must be structurally strong and shall be embedded in cement concrete in the ratio of 1:3:6 (1cement : 3 coarse sand : 6 stone agg. 20mm nominal size) including excavation and removal of surplus earth. For finishing while installation of miniatures / sculptures Applying primer coats (two or more coats) of approved quality primer, painting with P.U. Coating automotive paint of approved quality (two or more coats) with giving proper finishing as per direction of work-in-charge
Supply, Installation, Testing & Commissioning of 11/0.433kV, 3-phase, 63 kVA Distribution Transformer with Bimetallic Terminal Connectors, Energy Level-2, Aluminium wound, and with LV Cable Box having detachable Aluminium Gland plate, Gapless Surge Arrestor 9 kV ,10 kA ,LA with polymer housing, Stn. Type, 11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type, 11kV Horngap fuse set 3 phase 200A, 25 mm² Single-Core Cable,1.1kV Grade, PVC Insulated Stranded Conductor FRLS type, 9 Mtr. Long Pole( ST-410 SP33),11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lightening Impulse 75kV Positive and 80kV Negative, creepage distance 320mm, GI Channel/Angle/Flat of sizes including clamps, Galvanized Nuts and Bolts, 32/63 amps TPN Switch Disconnector Fuse Unit, Cement bottoming 1:2:4 mix as per REC standards 0.5cum /pole, Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover,11KV polymeric composite pin insulator 12KV,5KN, Lighting impuse 75KV Positive and 80KV Nragtive ,creepage distance 320mm,LT Distribution Box for63/100/200/250KVA DTR with MCCB for incomer & SFU for outgoing Circuits, Galvanised Stay Set with 50 x 8mm stay clamp,guy insulator(2nos) anchor plate (200 X 200 X 6mm), nut bolts, 2 Nos turn buckles,1.8m long ,16mm diameter solid GS stay rod & 7/3.15mm dia GI Stranded wire complete,Wedge connectors/PG Clamps,Danger Plates with Clamps, GI Barded Wire for Anti Climbing ,3-Ø,4 Wire Trivector Meter with CT ,Cement bottoming 1:2:4 mix as per REC Standards .5cum/pole, Painting of poles Red Oxide, Painting of polesAluminium Paint ,Sundry items like aluminium lugs,jumpers,binding tape,
SITC 11KV Tapping Point Mid span
SITC of 1KM of 11KV Line on 9MTR ST Poles,50mm² ACSR Conductor with half span of 52Mtr: : 9 Mtr Long POle ( PCC WL 300KG ,ST-410 SP33) ,11Mtr Long Pole ( PCC WL 360KG ,ST-410 SP56) , GI V cross with top Bracket including clamp ,GI Channel X arm including clamps and braces 50mm² ACSR Conductor PG Clamps for 50mm² ACSR Conductor, 11 KV Polymeric composite Pin Insulator 12kV , 5KN, Lightening Impulse 75kV Positive and 80kV Negative, creepage distance 320mm, 11 KV Polymeric composite disc Insulator 12kV , min failing load 45KN, Lightening Impulse 75kV Positive and 80kV Negative, creepage distance 320mm ,Galvanized Nuts and Bolts, Danger Plates with Clamps , Anti Climbing Device with Clamps, Earthing pipe of 40 mm or GI Rod 20mm 2.5Mtr long through GI Strip, Red Oxide,Aluminium Paint , Cement bottoming 1:2:4 mix as per REC standards 0.5cum /pole ,Stone Pad (300mm X 300mm x 75 mm) Aluminium Jointing Sleeves, Galvanised Stay Set with 50 x 8mm stay clamp,guy insulator(2nos) anchor plate (200 X 200 X 6mm), nut bolts, 2 Nos turn buckles,1.8m long ,16mm diameter solid GS stay rod & 7/3.15mm dia GI Stranded wire complete .
DG SET 125 KVAThree Phase with AMF Panel, Water cooled , diesel engine , 4 Cylinder, liquid cooled, Turbocharged After cooled,developing 156 HP at 1500 RPM. This is electric start, compression ignition, 4 stroke engine design torun continuously 1500 RPM. Diesel conforms to present CPCBIV+ norms. The diesel engine comprises of following: - • Radiator with Fan • Electric starter motor with soft starting system • G3 as per ISO 8528 Part V class governor • Battery charging alternator • Dry type Air cleaner with service indicator • CRDI System • Lube Oil & Fuel filter • DOC , SCR • First fill of lube oil & coolant • IoT Remote Monitoring System ALTERNATOR: , suitable for continuous operation rated at 1500 rpm 415.00V, 0.80PF, 50.00Hz, Ph. in SPDP enclosure, self-excited, self-regulated Brush less, floor mounted. The alternatorconforms to IS:4722,BS EN 60034-1 & will be suitable for tropical condition. with Installation at site
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
63mm Dia (OD- 63 MM and ID 51 MM)
90mm dia (OD- 90 MM and ID 76 MM)
120 mm Dia ((OD- 120 MM and ID 103 MM)
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a )25 mm
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required .
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required .
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required . A)Single pole
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required . b)Single pole and neutral
Supplying and fixing Following rating ,four pole (three phase and neutal),415 volts, residual current circuit breaker (RCCB) having a sensitivity current 30 MA in the existing MCB DB complete with connections,testing and commissioning etc.as required.
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required . b) 125 A,36KA,FPMCCB
Supplying, Instalaltion, Testing & Commissioning of 1.1 grade, 3x1.5sqmm FRLS PVC insulated flexible copper conductor, Single core cable in the existing surface/recessed steel/ PVC Conduit as required.
Supplying, Instalaltion, Testing & Commissioning 1.1 grade, 3x2.5sqmm FRLS PVC insulated flexible copper conductor, Single core cable in the existing surface/recessed steel/ PVC Conduit as required.
Supplying, Installation, Testing & Commissioning of following cable Al. conductor XLPE insulated PVC Tape inner sheathed for multi core cables , Armoured as per IS,PVC type ST to sheathed 650/1100V grade as per IS 7098 (part 1)1988
4Cx4 Sqmm
4Cx6 Sqmm
4Cx10 Sqmm
4Cx16 Sqmm
4Cx25 Sqmm
3.5C x 70 Sqmm
Supply, Installation, Testing & Commissioning of 12W LED Landscape outdoor LED Bollard made out of Aluminium casting complete 600-700mm long with PU paint and suitable post top LED light, PC diffuser opening for uniform distribution of light. Luminaire is provided with a base plate and fixing holes for directly mounting on the concrete pedestal. Height of Bollard between 600-700mm. Where Luminaire is wired with inbuilt driver with 4.5kV surge protection, Nominal Supply voltage will be 220-240V, power factor will be more than 0.95. And ingress protection will be IP65. CCT: 3000K ± 250K. The branding name shall be embossed on the housing of the fixture. The minimum warranty shall be for 2 years.
SITC of 5 Mtr height flange mounted hot dip galvanized Octagonal pole made from HT steel plate, window with flash cover with full verticle window cover at appropriate height from the base plate on existing cement concrete pedestal as required. i/c supplying and fixing of 6 mm thick laminated mounted sheet inside the window mounted on and i/c providing and welding 3 nos. GI strips 4 mm thick of suitable length and having suitable size tapped holes as reqd, terminal block suitable for 25 sq mm conductor – 4 nos. & shorting links on DIN channel i/cpdg and fixing DIN channel of suitable length,, 6 Amp. SPMCB ‘C’ characteristics, earth stud, cable support clamp suitable for Upto 4x25 sqmm cable. Logo/Name of manufacturer shall be embossed on the Pole. Galvanization as per relevant IS.5.0 mtr height, 3 mm thick, bottom dia of 130mm & top dia of 70mm base plate of size 225 x 225 x 12 mm thick including Foundation. Fabrication supplying and fixing Class B Galvanised single overhang arm bracket made out of 250 mm long galvanized top tube with cap & 1000 mm long 32 mm dia galvanized pipe with tightening bolts complete as reqd. Foundation bolt size 16mmx600mmx4 nos. each inclusive 45 Watt LED light fixture.
Supply, Installation, Testing and Commissioning of 50 Watt LED floodlight luminaire 3000K colour temp. CRI>70, LED life 50000 burning hours 50° Temp. surge protection up to 3KV, IP65 and IK 06 with Die-cast aluminium housing, powder-coated finish, of following wattage. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100-270 V AC, 50 Hz with power factor > 0.9 . Luminaire shall be conforming to BIS (IS 10322) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required .
Supply, Installation, Testing and Commissioning of 30 Watt LED floodlight luminaire 3000K colour temp. CRI>70, LED life 50000 burning hours 50° Temp. surge protection up to 3KV, IP65 and IK 06 with Die-cast aluminium housing, powder-coated finish, of following wattage. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100-270 V AC, 50 Hz with power factor > 0.9 . Luminaire shall be conforming to BIS (IS 10322) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required .
Supply, Installation, Testing and Commissioning of 90 -100 Watt LED floodlight luminaire 3000K colour temp. CRI>70, LED life 50000 burning hours 50° Temp. surge protection up to 3KV, IP65 and IK 06 with Die-cast aluminium housing, powder-coated finish, of following wattage. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100-270 V AC, 50 Hz with power factor > 0.9 . Luminaire shall be conforming to BIS (IS 10322) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required .
Supply,Installation,Testing and Commissioning of 25-30 Watt Warm White LED Linear Wall Washer luminaire CCT 3000K ± 250K for illuminate 3D wall painting with aluminium extruded housing. Length of the luminaire shall be 1000mm in size. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100 to 270VAC ,50Hz , powerfactor>0.9. Fixture shall be suitable to operate at ambient temperature range of-5°Cto+50°C and shall be IP65 and IK06 rated. Lifetime should be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required Engineer-In-Charge. The branding name shall be embossed on the housing of the fixture. The minimum warranty shall be for 2 years.
Supply,Installation,Testing and Commissioning of 40-45 Watt Warm White LED Linear Wall Washer luminaire CCT 3000K ± 250K for illuminate 3D wall painting with aluminium extruded housing. Length of the luminaire shall be 1000mm in size. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100 to 270VAC ,50Hz , powerfactor>0.9. Fixture shall be suitable to operate at ambient temperature range of-5°Cto+50°C and shall be IP65 and IK06 rated. Lifetime should be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required Engineer-In-Charge. The branding name shall be embossed on the housing of the fixture. The minimum warranty shall be for 2 years.
SITC Junction boxes outdoor type Supply made of Thermoplastic Polycaronate Boxes Mini. Size 93 x 93 x 62 mm in Black colour. The Junction Box Should be IP 67/69 ( IEC 60529 ) Thermoplastic PC weatherproof with multi level knockouts on four Side for cable Entry in different sizes . Lid fasteners shall not have screws but shall be with quarter turn locking knobs – which is well visible ( open – locked), and they will be sealable without any accessories. The Box Should be UV Resistant in accordance with IEC 61 439-1, Clause no 8.4.4. The Joint Box should be Weatherproof : Rainwater proof, temperature resistant, Connecting Box as per IEC 60670-22 and IEC 60695 – 2 – 11 : Flame – retardant & Self-extinguishing. Glow Wire tested at minimum 750 deg C. The box shall have elongated holes inside and suitable brackets outdoor fixing them for wall/pole mounting provision with suitable Terminals . The Junction Box with nut bolts complete all as per manufacturer’s instructions. Make : Cat Part :- KF 0202 B of Hensel/Siemens/GE Power/Schneider/ L&T/ABB. Manufacturer should submit test certificate as per above Standard.
SITC Junction boxes outdoor type Supply made of Thermoplastic Polycaronate Boxes Mini. Size 205 x 255 x 112 mm in Black colour. The Junction Box Should be IP 67/69 ( IEC 60529 ) Thermoplastic PC weatherproof with multi level knockouts on four Side for cable Entry in different sizes . Lid fasteners shall not have screws but shall be with quarter turn locking knobs – which is well visible ( open – locked), and they will be sealable without any accessories. The Box Should be UV Resistant in accordance with IEC 61 439-1, Clause no 8.4.4. The Joint Box should be Weatherproof : Rainwater proof, temperature resistant, Connecting Box as per IEC 60670-22 and IEC 60695 – 2 – 11 : Flame – retardant & Self-extinguishing. Glow Wire tested at minimum 750 deg C. The box shall have elongated holes inside and suitable brackets outdoor fixing them for wall/pole mounting provision with suitable Terminals . The Junction Box with nut bolts complete all as per manufacturer’s instructions. Make : Cat Part :- KF 02525 B of Hensel/Siemens/GE Power/Schneider/ L&T/ABB. Manufacturer should submit test certificate as per above Standard.
Supply, installation, Testing and Commissioning of 12.5MTR shaft shall be in 2 section with hot dip Galvanised . There shall be circumferential Weld.It shall also include accessories for high mast including head frame,3point spension system with steel wire rope 6mm dia,double drum winch,cable,Galvanised Lantern carriage arrangement suitable for 6/12Luminaries .Supply of Foundation bolts manufactured from special steel along with nuts,washers,anchor plates&Temlates.Bottom Dia 360mm ,Top Dia 150mm ,Sheet Thk 3.3mm Automatic Control panel Fabricated with 16SWG CRCA sheet of size 600 X 600 X 300mm outdoor type with 25A Contractor ,63AMCCB,24 Hr Timer & Revese /Forward Switch. Flood light 150W Fixture made of pressure die cast Aluminium housing with front Toughened Glass with suitable lens for uniform having IP66 protection ,lumen 120/W for high Efficiency LED ,THD-10%, Potted driver with 4/6kva surge Protection.
Providing and fixing of flexible LED strip fixtures suiatable for rated voltage 220 volts, 50 Hz supply in White /Green/Red/Warm white color including all accessories like connectors, Endcap,Holding Cap and connector pins but excluding integrated LED adoptor etc as required.
Providing and fixing of Integrted LED Adaptor for flexible LED strip fixtures suiatable for rated voltage 220 volts, 50 Hz supply etc as required.
SITC of Pillar box Size 900 mm x 450 mm x 250 mm suitable for mounting incomer of 250 A MCCB/Main Switch Pole and energy meter 3 phase complete with eleethoypic grade aluminium of bus bar 25mm x 10 mm mounted on galvanised M.S. body power quoted pilferage proof SMC door Welded with S.S. rain com size 40mm x 40mm x 5mm x 600mm height in cutting 300 mm height below ground and covered with shade proof SMC sheet of 3 mm as required.
Design, manufacture and supply of 5 KW Solar Power Tree Grid Connected System with net metering facility.a)Solar Photovoltaic Module of capacity 265Wp or above, manufactured in India,conforming to IS14286/IEC61215,IS/IEC61730-Part-1,IS/IEC61730-Part-2.SolarPhotovoltaic Module conversion efficiency shall not be less than16.5%.PVmodules used in solar powerplants/systems must be warranted for their output peak watt capacity,which should not be less than90%at the end of 10years and 80%at the end of 25 years. b)Power Conditioning Unit(PCU)of350-800VDC Input voltage range and 400VAC,three phase,4wire,50Hz+/-2.5Hz,output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50degreeC.ThePCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. c) Data Monitoring System complete with accessories. d)Fixing of Array junction box & Main junction box with IP65protection and termination arrangement for incoming and outgoing cable alongwith glands,lugs and other accessories etc. as required. e) Lightning and surge voltage protection. f)Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit alongwith supplying & fixing of necessary channel/conduit lugs and other accessories etc.as required.
CCTVS/I/T/C of 2MP varifocal lens Bullet IP Camera with following specifications:- Image Sensor: 1/2.8 2MP CMOS or better** Minimum Illumination: 0.1 lux color, 0 lux with IR or better ** Shutter Speed:1/3 – 1/100,000 s Frame Rate:25 fps or better ** Lens: 2.8 to 12mm Varifocal lens Video Compression: H.265 or better ** S/N Ratio: >45dB Resolution: (1920x1080) or better ** Protocol: should comply to IPv4/v6, TCP/IP, HTTP, HTTPS, FTP, PPPoE,DDNS, IEEE802.1X IR Range: Minimum 20m Operating Temperature: -20 to 55 deg Cent Weatherproof Standard:IP66 or better ** Safety standard: UL
S/I/T/C of 2MP PTZ Camera with following specifications:- Image Sensor: 1/2.8 2MP CMOS or better** Minimum Illumination: 0.1 lux color, 0 lux with IR or better ** Shutter Speed:1/3 – 1/100,000 s Frame Rate:25 fps or better ** Lens: 30 X ZOOM Video Compression: H.265 or better ** S/N Ratio: >45dB Resolution: (1920x1080) or better ** Protocol: should comply to IPv4/v6, TCP/IP, HTTP, HTTPS, FTP, PPPoE,DDNS, IEEE802.1X IR Range: Minimum 20m Operating Temperature: -20 to 55 deg Cent Weatherproof Standard:IP66 or better ** Safety standard: UL
S/I/T/C of 32 channel NVR with the following specifications: Camera resolution:upto8MP Interface: 1 HDMI, 1VGA minimum Compression :H.265or better** Network Throughput :160Mbps or better** USB Port: 2 USB port (USB2.0)minimum Hard disk interface: 2 SATA port suitable for 6TB each Protocol: IPv4/v6, TCP/IP, HTTP, HTTPS, FTP, PPPoE,DDNS Operating temp: -10 to 55 deg Cent Safety standard: UL
SITC of 6 TB surveillance HDD
SITC of 8 port Giga PoE switch, 8(PoE 10/100) + 2(10/100) port long distance switch
Supply Installation testing Commissioning of following rack capacity with glass front door, steel rear door, power supply, MCB, cable manager, drawer shelves and wiring channels to accommodate CCTV systems equipment and complete with accessories as reqd.17 U
S/I/T/C of LED Monitor full HD complying with the following specifications: Resolution : Full HD : 1920 x 1080 or better Backlight : LED Brightness : 400 NITS min. Video I/P port a) Min. 02 Nos HDMI 1920x1080. b) Min 01 No VGA Contrast : 1200 : 1 or better Power supply : 230v + / - 10%, 50 Hz Installation at site with connections and along with all accessories of 42 INCHES etc. complete as required with min. 3 year onsite warranty.
P/f of Hot press sheed moulded compound (SMC) Fire retardant (Temp. Resistance up to 200 C ) IP-55 weather proof pole box of inner dimension 300mm X 200mm X105 mm(NS) complete with suitable arrangment for fixing of 4 nos of 6 to 32 amp single pole MCB & 63 Amp double pole isolator (MCB/Isolator excluded) with neutral link duly shorting on DIN channel with 2 nos. of MS clamps with SS back plate of suitalbe size with Danger monogram property printed on the cover etc as reqd.
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD- 63 MM and ID 51 MM)
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable
Supply of following sizes of PVC insulated & PVC sheathed copper conductor 3 core submersible cable conforming to IS .694/2010 etc. as reqd. 3x 2.5 sqmm
Supply Installation testing and Commissioning of Pigtails 1 meter with Splicing and testing.
Supply Installation testing and Commissioning of optical media converter gigabit SC to SC type up to 10 km.
Supply Installation testing and Commissioning of LIU boxes complete with all accessories etc. as required of 12 ports
Supplying and laying of Optical Fiber Single Mode Cable (6-Fiber) on surface or in existing conduit etc complete i/c connections etc complete as required
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
PA System SITC all weather proof loudspeaker for speakers for otdoor ground , having sound LF, HF - 1" exit Max SPL not less than 128db /1m (peak), with continuous RMS power of 45 - 55 Watt RMS with programme power of 90 – 110 Watt RMS & peak power of 180 - 220 Watt RMS with minimum sentivity of 97db, Nominal Impedance : 8 ohms, nominal dispersion : 90 x 60, in birch plywood paint finish with wall mount bracket , suitable size MS frame box cover for protection etc. complete as required.
Supply installation testing & commissioning of Professional total 16 channel audio mixer with 16 mic inputs; 2 line inputs 2 stereo inputs; with inbuilt effects and equalizer, graphic EQ etc. complete as reqd.
Supply installation testing & commissioning of Dual Channel Power Class H/ D amplifier for Subwoofer & Main Speakers & outdoor speakers 2000 watt , Damping factor > 450, as required.
Supply, laying & Fixing of Speaker Lines: 2-Core, 2.5 sq mm High definition Speaker Cable, PVC insulated in PVC jacket laid in existing conduits as reqd.
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a )25 mm
Supplying, installation, testing & commissioning of mixer amplifier mic input, USB input and Bluetooth, 50 Watt, at 240 volt AC supply complete etc as required.
Supplying, installation, testing & commissioning of mixer amplifier mic input, USB input and Bluetooth, 75 Watt, at 240 volt AC supply complete etc as required.
Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.
P/f of Hot press sheed moulded compound (SMC) Fire retardant (Temp. Resistance up to 200 C ) IP-65 weatherproof pole box of inner dimension 500mm X 400mm X200 mm(NS) complete with suitable arrangement to accommodate for fixing mixer amplifier complete as required
Heavy Duty tripod Turnstile, Specification ;- Passage width of 520mm,throughput rate;35p/m,power supply ;100-240v,opertional voltage-24v,max power cosumption ;30w,frequency;50-60hz,prectection level;IP44,working tempertaure;25c to 70c,,electromagnetic drive-DC,dimension excluding bars-480x280x980,,semi auto mode,pure mechanical mode,bidirectional function,adustable timeout delay.Material-Housing(ss304),Barrier arms(stainless steel),Lid (Steel/artifical stone)
BOOM BARRIER - BGL-100 MaximumlengthofBoom:5m BoomRestStand:Yes Armmaterial:Aluminium (withRed&GreenLEDindication) TimeforUp/down:6s Inputcontrolsignal:Drycontact IngressprotectionDegree:IP54 InputInterfacefor:1.Photocell 2.Airswitch 3.Loopdetector LEDIndicator:Red/Green OptionalInterface:Accesscontrolpanel,Standalone accesscontrol,Controlbutton Remotecontrol:Yes,upto25meters Mode:Automatic/Manual Incorporatedcontrolpanelwith3 pushbuttons(STOP/UP/Down)tocontrolthemotor Bumpingbounceback:Optional
Provision of Ticketing Software System Application Admin Panel for remote access & real time data viewing along with MIS reports,Kiosk App for Ticket printing at Counter (Android),QR Scanner app for Entry Gate (Android),QR Scanner app for Exit gate (Android),Backend Software For online mode and online access,Backend Software for Offline mode and offline access Training of software to MCD employees and continued service support including upgradation along with 5 years service support with no extra payment. Make Custom built as per department requirement HSN/SAC: 998314
Providing and fixing of Ticketing Hardware System (General) Smart Network Router (Minimum AC1750,802.1 ac/up to 300+1450Mbps/gigabit) - 1 No Make Netgear/ TP-Link/ Asus HSN/SAC: 998319
Providing and fixing of Ticketing Hardware System (Pre Counter) -At least 10-inch android tablet (6000mAH battery,2GB RAM,32GB ROM,charger) With screen Protector - 1 Nos -Thermal Printer (ethernet/LAN/auto cutter) 1 Nos., -Tablet Stands - 1 Nos. -Black Metal lockable Cash Drawer/register/locker with Key and lock and 5 compartments for paper currency with Stainless Steel Clips and 8 compartments for coins [Size – 16.53inch (length) * 15.95inch (breadth) * 4.33Inch (height)] – connect with thermal printer/tablet for added security and easier cash management. - 1 Nos -MultiPlugs/Extension Cords - 1 Nos Make A: For Tablet (Samsung/ Lenovo/ Xiaomi) B:For Thermal Printer (Epson/ Brother/TVS) C : Tablet Stand (Generic) D:Drawers (Generic) E:Multiplugs/Extension Cord (GM/ Havells/ Anchor/Cona) HSN/SAC: 998319
Providing and fixing of Ticketing Hardware System (Entry/Exit Gate) - At least 6 inch Android Phone (5000mAH battery,2GB RAM,32GB ROM,13MP/5MP,charger) with screen Protector and Cover - 1 Nos., - Manual/ Wireless Barcode/QR code Reader (Bluetooth 1D/2D scanning,ShockProof,charger) - 1 Nos. -Power Banks for Battery Backup for Android Phones - 1 Nos Make A: For Phone (Samsung/ Lenovo/ Xiaomi/Nokia/Redmi/OnePlus) B:For Reader (Epson/ Dcode/ Pegasus ) C : Power Banks (Ambrane/ Xiaomi/ Duracell/ Portronics) HSN/SAC: 998319
On Premise Physical Ticketing Server (Processor - [1*10C/20T 9.6GT/s, 13.75M Cache Processor (Expandable upto 2 processors)], RAM - [1*16GB RDIMM, 3200 MT/s dual rank (total 16 ram slots)], server management tool, Hard Disk - [2.4TB ,HDD 10K RPM ,Hot Plug 2*1.2TB for data failover (expandable upto 8 drives) RAID 1 + Controller +2GBNV Cache,DVDRW+Dual Power Supply (2*495W,instant failover capability),LAN (2*1Gbe LOM) ,UEFI/GPT),5 year onsite warranty Make Dell /HP/Lenovo HSN/SAC: 998319
Horticulture Ficus benjamina (green) height 150-165 cm., bushy with healthy branches and lush green foliage in big size HDPE bag
Supply of Ficus panda of height 45-60 cm. with 6-7 branches and healthy foliage in polybag of size 25 cm as per diraction of officer-in-charge
Supply of Rhapis Palm having ht. 45 cm to 60 cm with 5 to 7 suckers, well developed,full of fresh and healthy leaves in 25 cm size of Earthen pot / Plastic pot. as per direction of the officer-in-charge
Supply of Areca Palm having ht. 1.80 m to 2.10 m with 8 to 10 suckers, well developed, fresh and healthy with lush green foliage in HDPE bag as per direction of the officer-in-charge
Supply of Wadelia trilobata,full of leaves in 15 cm size in plastic Bag as per direction of the officer-in-charge
Supply of Syngonium (Butterfly) variegated with 2-3 suckers healthy foliage in Earthen Pot/ Plastic Pot of size 25 cm as per direction of the officer-in-charge
Supply of Iresine herbstii, of height 25-30 cm., full of branches well developed in 15 cm size of Earthen Pot / Plastic Pot. As per direction of officer-in-charge
Supply of Tabernaemontana coronaria (Chandni single) variegated of height 105-120 cm., multibranched, bushy in big size HDPE bag as per direction of the officer-in-charge
Providing and Fixing Furcaria Variegated hybrid well developed with fresh & healthy foliage 20 and above attractive leaves in 35 cm Cement Pot as per direction of the officer-in-charge.
Providing and Displaying Topiary of Ficus Panda well developed with fresh & healthy foliage with 3 to 4 Ball and 60 to 75 cm spread each Ball, 135 to150 cm ht., in 35 cm HDPE bags /Cement Pot as per direction of the officer-in-charge.
Providing and Displaying Cyprus Golden Conical Shape 150 to 165 cm ht., with fresh and healthy Golden colour foliage in 35cm Cement Pot as per direction of the officer-in-charge.
Providing and stacking of Ficus reginald well branched, bushy of height 60-75 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.
Providing and stacking of Plumeria alba dwarf dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.
Providing and stacking of Pterospermum acerifolium (Kanak Champa) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.
Providing and Displaying Cycus revoluta in 35 cm challi, specimen , having 30 to 40 with fresh and healthy, leaves having 25cm to 30cm circumfrance of base stem well developed as per direction of the officer-in-charge.
Providing and stacking of Largerstroemia indica diffrent color of height 90-105 cm. multibranched in poly bags of size 25 cm as per direction of the officer-in-charge.
Bauhinia blakeana (Kachnar) diffrent color height 120-150 cm. in big poly bag size 25 cm
Providing and Displaying Bismarckia Palm 115 to 180 cm ht., well developed 12 and above good color fresh and healthy leaves in 40 cm Cement Pot as per direction of the officer-in-charge.
Providing and Fixing fishtail palm ht. 240cm bottom girth 40-50 cm well developed in big HDPE bag
Providing and Fixing foxtail palm ht. 240cm bottom girth 40-50 cm well developed in big HDPE bag
Providing and Fixing croton petra ht. 20-45cm in big HDPE bag
Providing and Fixing dracaena song of india ht. 20-45cm in big HDPE bag
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 80 mm nominal inner dia Pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 32 mm nominal outer dia Pipes
Sand Filter - The Sand filter of 370 m3/hr pool filter set to be placed in water body to keep it clean and it comprises a pump with pre-filter and a sand filter with these functions: filtering, back-flushing (filter cleaning), rinsing (using sand to remove suspended materials), winter position (relieving stress on the seals). The appliance is controlled via a 4-way valve. The filter set is equipped with a gauge. The recommended running time is 9 to 10 hours per day. The set ensures clear water in the pool and efficient energy use. The system can be assembled and installed quickly. The pump inlet opening should be at least 30 cm below the water level in the pool.
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:All Kind of Soil
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineerin- charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
Providing and laying 60 mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) cluding 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : 19.27.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Providing and fixing of Metro Sheet Pre painted galvanized HI-Rib Roofing/Cladding system comprising of profit sheeting having 1060mm cover width, length 3657.6 (12 foot) thickness 0.50mm. The sheet shall have minimum two/three small stiffing ribs in between pans, zinc coating mass total of (both side) as per IS:277, with coating of regualr modified polyester paint (RMP) system as per IS:12246. The color coating shall comprise of 15-20 micron finish coat over 5-7 micron primer coat on the exposed side and 5-7 micron over 5 micron primer on back side.
PROVIDING AND FIXING G.I CHAIN LINK FABRIC FENCING OF REQUIRED WIDTH IN MESH SIZE 50x50mm including strengthining with 2mmdia wire or nuts,bolts and washer as required
Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
CC for flooring Provision and laying in position cement concrete of specified grade excluding and cost of centering and shuttering. All work upto plinth level in CC 1:1.5:3 (1 Cement: 1.5 Coarse Sand: 3 graded stone aggregate 20 mm nominal size)
CC for flooring Provision and laying in position cement concrete of specified grade excluding and cost of centering and shuttering. All work upto plinth level in CC 1:2:4 (1 Cement: 2 Coarse Sand: 4 graded stone aggregate 20 mm nominal size)
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
Brick work with common burnt clay modular bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand).
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand)
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
Supply and fixing of 111 ft high Lord Krishna sculpture made of FRP suitable material designed for earthquake, wind pressure etc. with full structural safety including foundation work and testing of accuracy and beautification of surrounding. Complete in all respect.
Percentage cost to be borne by the Nagar Nigam. (The cost for which Nagar Nigam shall make payment to vendor)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.41 MB
BOQ_2003748.xls
BOQ • 0.46 MB
RFP.pdf
Tender Documents • 13.88 MB
NEWNIT.pdf
Tender Documents • 0.48 MB
Download all tender documents and submit your bid