REPAIR AND MAINT TO FLOORING, TILING AND JOINERIES AT 29 RR BN OF HQ 10 SECT RR UNDER AGE (I) CIF (K)

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified.

Demolition of cement concrete (un reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including disposal of unserviceable materials,debris and rubbish to a distance not exceeding 100 metre, complete all as specified and as directed by the Engineer-in-Charge.

M&L 75 mm thick Plain cement concrete, 1:4:8, type D-2 using 40mm graded crushed stone aggregate, as in sub-base of floor/path etc. finishing surfaces even and fair, complete all as specified and as directed by the Engineer-in-Charge.

M&L 25mm thick Plain cement concrete, 1:2:4, type B-0 using 12.5mm graded crushed stone aggregate, surface finished fair to receive top layer of flooring, complete all as specified and as directed by the Engineer-in-Charge.

M&L Non skid ceramic coloured tiles 1st quality 7 to 8mm thick, (square/ rectangular), area of each tile exceeding 0.18sqm, but not exceeding 0.38sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and as directed by the Engineer-in-Charge.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and as directed by the Engineer-in-Charge

M&L Non skid ceramic coloured tiles Ist quality 7 to 8mm thick, (square/ rectangular), area of each tile exceeding 0.11sqm, but not exceeding 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and as directed by the Engineer-in-Charge.

M&L Glazed ceramic tiles, coloured, of size 350mm x 250mm/450 mm x 300mm, thickness not less than 7mm as in vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match the shade of tile, fixed over and including 10mm thick rendering (bedding layer) on brick/concrete surface in cement mortar 1:4, complete all as specified and as directed by the Engineer-in-Charge.

Dismantling timber scantling 40 Sq cm and over in section in any position, unframed work, complete all as specified and as directed by the Engineer-in-Charge.

M&L 2nd class soft wood (Kail) as in scantling, clean sawn timber, fixed in framed work, complete all as specified and as directed by the Engineer-in-Charge.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) area n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) , complete all as specified and directed by the Engineer-in-Charge.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n.exc 4 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost), complete all as specified and as directed by the Engineer-in-Charge.

S&F aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (minimum thickness of powder coating 50 micron)

S&F aluminium powder coated door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, 3 hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F aluminium powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty or fixed in aluminium door/ window in square n exc 0.5 sq. m in each pane

M&L for powder coated (min 50 micron) aluminium three track sliding window with extruded profile of top bottom & side track for fixing 5.5 mm thick sheet glass fitted with glazing clip and EPDM rubber in two shutters and fixing SS Wire mesh in one shutter and powder coated deco grill including roller and handle complete all as specified and directed. Note :- (a) The quoted rate includes 5.5 mm sheet glass, SS wire mesh ,Deco grill. (b) Framed section 3 track size = 92x31.75x1.5 mm (c) Shutter section size = 40x18x1.55 mm

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification & drawings shown in SSR Part-II,, complete all as specified and as directed by the Engineer-in-Charge.

S&F Factory made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm plain colour PVC sheet on the back face with particle board core, supplied & fitted in the frame at site as per specification & drawings shown in SSR Part-II, complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs Butt hinges, medium weight, cold rolled, mild steel 100 mm long (ISI marked), complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs Aluminium anodised, barrel tower bolt of extruded section and fixed, 200 mm long (ISI marked), complete all as specified as directed by the Engineer-in-Charge.

S&F in repairs Aluminium anodised, barrel tower bolt of extruded section and fixed, 100mm long (ISI marked), complete all as specified as directed by the Engineer-in-Charge.

S&F in repairs Aluminium handle, cast type, anodised, 150 mm long (ISI marked), complete all as specified and directed by the Engineer-in-Charge.

S&F in repairs Butt hinges, medium weight, cold rolled, mild steel 75 mm long (ISI marked), complete all as specified and directed by the Engineer-in-Charge.

S&F in repairs Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or excluded sections and fixing bolts and sliding bolts of excluded sections or cast aluminum alloy and fixed, 300 mm long, complete all as specified and directed by the Engineer-in-Charge.

S&F Harrison rails(curtain rail), mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed by the Engineer-in-Charge.

Taking down plastering in cement lime or cement mortor on brick or stone work etc. including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed by the Engineer-in-Charge.

M&L Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6, surface finished even and smooth without using extra cement, complete all as specified and directed by the Engineer-in-Charge.

M&L Preparation of new plastered surfaces of wall and applying three coats of white wash, complete all as specified and as directed by Engineer-in-Charge

M&L Rendering 10 mm thick on fair faces of brick or on concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement, complete all as specified and as directed by Engineer-in-Charge.

M&L Preparation of new plastered / unplastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of chalk whiting, complete all as specified and as directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden, steel,frame or stone, concrete or brick surrounds, incl punching or drilling out old glazing pins/spring clips and providing and fixing new ones.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane

Dismantling wall and ceiling board (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed by the Engineer-in-Charge.

S& F Anodised aluminium snap grid frame work of size 605mm x 605mm for false ceiling, complete all as specified and directed.

M&L for Exposed metal frame ceiling with calcium silicate board 8 mm thick of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid, complete all as specified. Note:- Frame work for ceiling shall be measured and paid separately.

M&L Veneered decorative plywood, grade 1 ( with BWR resin ) with decorative face veneers on both face, 6mm thick as in ceiling, lining; fixed with nails to timber frame work, complete all as specified and directed by the Engineer-in-Charge.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engineer-in-Charge.

M&L for Brick work with sub class `B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete all as specified and directed by the Engineer-in-Charge.

Note :- An amount of Rs. Rs 21,640.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S A Q ENTERPRISES (BID ID -3309835)

M/S B A Traders (BID ID -3309587)

M/s FAYAZ AHMAD BHAT C/O ZAHOOR AHMAD DAR (BID ID -3310052)

M/S MAHIR MUNEER (BID ID -3310037)