Laying of BT link road from Delhi Public School at Khajaguda Main Road to Chitrapuri colony road at Sai Vaibhav Kaman at Khajaguda

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm by mechanical means in areas of non thorny jungle(light jungle), removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH.including Contractors profit and Overhead charges but excluding Seignorage charges for finished items of work and as directed by Engineers-in-charge. For ROAD WORK,CD WORKS AND DRAIN

Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading , trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with all lifts and lead upto 1000 m as per Technical Specification Clause 302.3 MORD / 301 MORTH including Contractors profit and Overhead charges but excluding Seignorage charges. complete for finished item of work and as directed by the Engineer-in-charge. For ROAD WORK,CD WORKS AND DRAIN

Forming embankment /subgrade with borrowed useful earth from outside road boundary by mechanical means with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, as per MoRT&H specification 305 (4th revision) - with a lead charges , including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge. For ROAD WORK,CD WORKS AND DRAIN

Construction of Granular Sub-Base by Providing Grading VI material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller 80-100 kN / Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH. Mix in Place Method RBR- SBBS-1 A.including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge. For ROAD WORK,CD WORKS AND DRAIN

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting withVibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.13 and Technical Specification Clause 406 MORD / MORTH. including Contractors profit and overhead charges but excluding Seigniorage Charges complete for fiished item of work and as directed by the Engineer-in-charge. For ROAD WORK,CD WORKS AND DRAIN

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 MORD (for use on Wet mix macadam & WBM) etc. finished items of work and as directed by Engineers-in-charge. For ROAD WORK,CD WORKS AND DRAIN

Providing and applying tack coat with Bitumen emulsion (RS-1) (Rapid Setting) using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom including conveyance of bitumen emulsion round the trip as per Technical Specification Clause 503 MORD, including Contractors profit and overhead charges but excluding Seigniorage Charges complete for fiished item of work and as directed by the Engineer-in-charge. For ROAD WORK,CD WORKS AND DRAIN

Providing and laying of Dense Graded Bituminous Macadam with 100 - 120 TPH batch type hot mix plant producing an average output of 75 tones per hour using hard blasted granite crushed aggregates of Grading - II as per table 500-10 of MoRT&H Specification 507 (5th revision) premixed with bituminous binder of VG-40 grade @ (4%-4.5%) of weight of total mixture and , transporting to site, laid over a previously prepared surface with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolled as per Clauses 501.6 and 501.7 with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction including hire and operational charges all T&P and all other contingent charges necessary including cost of (excluding seigniorage) charges of all materials etc.including contractors profit and overheads, excluding seignorage charges etc., complete for finished item of work and as directed by engineer in charge. For ROAD WORK,CD WORKS AND DRAIN

Providing and applying tack coat with Bitumen emulsion (RS-1) (Rapid Setting) using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom including conveyance of bitumen emulsion round the trip as per Technical Specification Clause 503 MoRT&H ,/5.2 including Contractors profit and overhead charges but excluding Seigniorage Charges complete for finished item of work and as directed by the Engineer-in-charge. For ROAD WORK,CD WORKS AND DRAIN

Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading II (13 mm nominal size), premixed with bituminous binder VG 40@ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic big paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects with all leads (MORTH 5.8)including Contractors profit and overhead charges but excluding Seigniorage Charges complete for fiished item of work and as directed by the Engineer-in-charge For ROAD WORK,CD WORKS AND DRAIN

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes as per Specification 803 MORTH, including Contractors profit and overhead charges but excluding Seigniorage Charges complete for finished item of work and as directed by the Engineer-in-charge. For ROAD WORK,CD WORKS AND DRAIN

Construction of Sub Grade and Earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Clause 305 MORTH including Contractors profit and overhead charges but excluding Seigniorage Charges complete for finished item of work and as directed by the Engineer-in-charge. For ROAD WORK,CD WORKS AND DRAIN

PCC (1:3:6) nominal mix in foundation with crushed stoneaggregate 40mm nominal size mechanically mixed, Placed in foundation and compacted by vibration including curing complete as per MORT&H including Contractors profit and overhead charges but excluding Seigniorage Charges complete for finished item of work and as directed by the Engineer-in-charge. For ROAD WORK,CD WORKS AND DRAIN

Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 50 mm thick in PCCM20 grade, sloped towards the kerb, kerb stone with channel laid with kerb laying machine, foundation concrete laid manually,using concrete batching and mixing plant as per clause 408 MORTH, MorTH 408 /8.2 B, RBR-TSRA-30(B). including Contractors profit and overhead charges but excluding Seigniorage Charges complete for finished item of work and as directed by the Engineer-in-charge. For ROAD WORK,CD WORKS AND DRAIN

Supply & laying of precast concrete blocks for paving of M-40 grade and thickness not less than 80 mm for Medium traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer's specification including labour charges for laying & fixing of precast concrete blocks for paving all sizes & shapes labour charges for loading & unloading, laying to desired lines and levels cost of cement, sand, water, electricity etc, including Contractors profit and overhead charges but excluding Seigniorage Charges complete for finished item of work and as directed by the Engineer-in-charge. For ROAD WORK,CD WORKS AND DRAIN

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. including Contractors profit and overhead charges but excluding Seigniorage Charges complete for finished item of work and as directed by the Engineer-in-charge. For Construction Of Culverts For ROAD WORK,CD WORKS AND DRAIN

Filling with sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming (APSS NO. 309 & 310) including Contractors profit and overhead charges but excluding Seigniorage Charges complete for finished item of work and as directed by the Engineer-in-charge. For Construction Of Culverts For ROAD WORK,CD WORKS AND DRAIN

PCC (1:3:6) nominal mix in foundation with crushed stoneaggregate 40mm nominal size mechanically mixed, Placed in foundation and compacted by vibration including curing complete as per MORT&H. including Contractors profit and overhead charges but excluding Seigniorage Charges complete for finished item of work and as directed by the Engineer-in-charge. For Construction Of Culverts For ROAD WORK,CD WORKS AND DRAIN

Provide for concrete plain/ reinfored concrete M15 grade mix in open foundations using 60% of 40 mm, 30 % of 20 mm, 10% of 10mm nominal size graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration, curing for 14 days complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 MORD and 1500, 1700 and 2100 MORTH including Contractors profit and overhead charges but excluding Seigniorage Charges complete for finished item of work and as directed by the Engineer-in-charge. For Construction Of Culverts For ROAD WORK,CD WORKS AND DRAIN

Manufacture , Supply and Laying and Jointing of Cement Concrete Pipe NP4 on first class bedding of granular material including fixing collar with cement sand mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry work in head wall and parapet as per Tech Specification No. 1100 MORTH(900mm dia NP4) including Contractors profit and overhead charges but excluding Seigniorage Charges complete for finished item of work and as directed by the Engineer-in-charge. For Construction Of Culverts For ROAD WORK,CD WORKS AND DRAIN

Supplying & Fixing of Molded Shanks Raised Pavement Markers made of plastic body moulded from HIPS(HIImpact Polysterene) or ABS or ASA ( Acrylic Strene Acrylonitrite and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 13635 kg tested in accordance to ASTM D 4280 Type H including Contractors profit and overhead charges but excluding Seigniorage Charges complete for finished item of work and as directed by the Engineer-in-charge. For Road Furniture For ROAD WORK,CD WORKS AND DRAIN

Providing and erecting direction and place identifications of semi reflective sign boards as per IRC:67 made of 2 mm thick M.S. Sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm width and required message, letters, figures with reflective engineering grade tape as per MORD specifications of required shade and colour. supported and welded on 47 mm x 47 mm of 12 SWG Square tube of 3050 mm height duly strengthened by 25 mm x 5 mm M/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 1701 MORD including Contractors profit and overhead charges but excluding Seigniorage Charges complete for finished item of work and as directed by the Engineer-in-charge. For Road Furniture For ROAD WORK,CD WORKS AND DRAIN

Reinforced cement concrete M15 grade kilometer stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 MORD / 804 MORTH including Contractors profit and overhead charges but excluding Seigniorage Charges complete for finished item of work and as directed by the Engineer-in-charge.For Road Furniture For ROAD WORK,CD WORKS AND DRAIN

Reinforced cement concrete M15 grade Hectometer stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 MORD / 804 MORTH including Contractors profit and overhead charges but excluding Seigniorage Charges complete for finished item of work and as directed by the Engineer-in-charge.For Road Furniture For ROAD WORK,CD WORKS AND DRAIN

Providing and fixing of typical informatory and Name Board with necessary Logo as per specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be we welded with MS angle irone frame of 25 mm x 25 mm x 5 mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75 mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450 mm x 450 mm x 600 mm, 600 mm below ground level. The top most diamond plate will be welded to middle plate by 47 mm x 47mm of 12 SWG sheet tube. All M.s. will be stove enameled on both sides. Lettering and printing arrows, border etc., will be pointed with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 MORD including Contractors profit and overhead charges but excluding Seigniorage Charges complete for finished item of work and as directed by the Engineer-in-charge.For Road Furniture For ROAD WORK,CD WORKS AND DRAIN

PCC (1:3:6) nominal mix in foundation with crushed stoneaggregate 40mm nominal size mechanically mixed, Placed in foundation and compacted by vibration including curing complete as per MORT&H including Contractors profit and overhead charges but excluding Seigniorage Charges complete for finished item of work and as directed by the Engineer-in-charge. For Center Median For ROAD WORK,CD WORKS AND DRAIN

Vibrated reinforced cement concrete M 30 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) centering, machine mixing, laying, vibrating, curing etc., as per approved drawings and during execution but excluding cost of steel and its fabrication charges as per MoRT&H specification 1500,1600,1700 & 2200 (5th Revision ) (Sub Structure) including Contractors profit and overhead charges but excluding Seigniorage Charges complete for finished item of work and as directed by the Engineer-in-charge.For Center Median For ROAD WORK,CD WORKS AND DRAIN

Providing HYSD bars Fe-550D from primary producers like SAIL, VSP STEEL, TATA or JINDAL PANTHER of different diameters, wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinforcement including cutting, bending, binding rods, tying grills, placing them in position etc., and over lapping welding if required etc., complete for all R.C.C items as per standard drawings,as per MoRT&H specification 1600 &2200 (5th Revision) and as per I.S.1786 of 1985 for Sub structure of R.C.C items. including Contractors profit and overhead charges but excluding Seigniorage Charges complete for finished item of work and as directed by the Engineer-in-charge.For Center Median For ROAD WORK,CD WORKS AND DRAIN

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm by mechanical means in areas of non thorny jungle(light jungle), removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH.including Contractors profit and Overhead charges but excluding Seignorage charges for finished items of work and as directed by Engineers-in-charge.FOR RCC BOX CULVERT - 2 VENTS

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. including Contractors profit and Overhead charges but excluding Seignorage charges for finished items of work and as directed by Engineers-in-charge.FOR RCC BOX CULVERT - 2 VENTS

Dewatering using 5 HP Pump, including Contractors profit and Overhead charges but excluding Seignorage charges for finished items of work and as directed by Engineers-in-charge.FOR RCC BOX CULVERT - 2 VENTS

Forming embankment /subgrade with borrowed useful earth from outside road boundary by mechanical means with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, as per MoRT&H specification 305 (4th revision) - with a lead charges , including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge.FOR RCC BOX CULVERT - 2 VENTS

PCC (1:3:6) nominal mix in foundation with crushed stoneaggregate 40mm nominal size mechanically mixed, Placed in foundation and compacted by vibration including curing complete as per MORT&H. including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge.FOR RCC BOX CULVERT - 2 VENTS

Vibrated reinforced cement concrete M 30 grade using 20mm & 10mm HBT crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges as per MoRT&H specification 1500,1600,1700 & 2200 (5th Revision ) for (Foundations) including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge.FOR RCC BOX CULVERT - 2 VENTS

Vibrated reinforced cement concrete M 30 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges as per MoRT&H specification 1500,1600,1700 & 2200 (5th Revision ) for (Sub Structure) including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge.FOR RCC BOX CULVERT - 2 VENTS

Vibrated reinforced cement concrete M 30 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges as per MoRT&H specification 1500,1600,1700 & 2200 (5th Revision ) for (Super Structure) including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge.FOR RCC BOX CULVERT - 2 VENTS

Providing HYSD bars Fe-550D from primary producers like SAIL, VSP STEEL, TATA or JINDAL PANTHER of different diameters, wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinforcement cutting, bending, binding rods, tying grills, placing them in position over lapping welding if required etc., complete for all R.C.C items as per standard drawings, as per MoRT&H specification 1600 &2200 (5th Revision) and as per I.S.1786 of 1985 for foundations of R.C.C items. including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge.FOR RCC BOX CULVERT - 2 VENTS

Providing HYSD bars Fe-550D from primary producers like SAIL, VSP STEEL, TATA or JINDAL PANTHER of different diameters, wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinforcement cutting, bending, binding rods, tying grills, placing them in position over lapping welding if required etc., complete for all R.C.C items as per standard drawings, as per MoRT&H specification 1600 &2200 (5th Revision) and as per I.S.1786 of 1985 for Sub Structure of R.C.C items. including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge.FOR RCC BOX CULVERT - 2 VENTS

Providing HYSD bars Fe-550D from primary producers like SAIL, VSP STEEL, TATA or JINDAL PANTHER of different diameters, wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinforcement cutting, bending, binding rods, tying grills, placing them in position over lapping welding if required etc., complete for all R.C.C items as per standard drawings, as per MoRT&H specification 1600 &2200 (5th Revision) and as per I.S.1786 of 1985 for Super Structure of R.C.C items. including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge.FOR RCC BOX CULVERT - 2 VENTS

Carting away & disposal of unserviceable excavated material with a lead of 16KM, including all incidental, labour charges, overheads and contractors profit, etc., complete for finished item of work. including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge.FOR RCC BOX CULVERT - 2 VENTS

Supply and transportation of 60/65W LED Street light Body made of high grade pressure die – cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >100 lumens/watt, with Ingress protection IP66, Driver surge protection more than 4KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>80, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with 5 years warranty. LUMINAIRE MAKE :PHILIPS / OSRAM / GE Venture / CROMPTON / BAJAJ / Surya / Wipro / Jaquar / Eveready / Halonix / Keselec / HAVELLS / POLYCAB / SURYA / SYSKA / Capart / Fortune Arrt / FIEM / Panasonic / Arraystorm / GM / Goldmedal / Silicon / Leksa / Orient / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs. (Data 7.9.8) including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

Erection charges for 7.50 Mts long Octagonal pole on bridge kerb portion (R.C.C). dulyprovided 4 Nos 8" Anchor bolts/ M20xsuitable "J" type bolts etc duly drilling holes to RCC slab and with V.C.C. M.15 concrete for base concreting up to a height of 8" with necessary Reinforcement work etc. including cost and con veyance of all material and all labour charges etc. including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge.

Fabrication, Transportation and supply of hotdip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door openingarrangement, including chain for anti theft mechanism, supply of suitable boards withbakelite sheet, din channel for MCB's as per IS specification suitable to withstand the wind speed of 180 KMPH for 7.50 Mtrs height Pole having dimensions Bottom 130mm, Top 70mm with 3mm thick, base plate 220 x 220 x 12mm and 4 Nos of M20 x 700mm long 'J' bolts along with template or equivalent Makes: BAJAJ / VALMONT / TRANSRAIL /SKIPPER / UTKARSH / LAASMA / CONSOUL. including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

Fabrication, Transportation and supply of 1.5 Mtr decorative galvanized Single arm bracket with PU paint complete with all accessories with MS galvanized 50mm dia Pipe. Makes: BAJAJ / VALMONT / TRANSRAIL / SKIPPER / UTKARSH / LAASMA / CONSOUL including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

Supply and fixing of suitable out door feeder piller box of size made with 14 SWG CRCA sheet with double door arrangement, making powder coating after processing of 7 Tank process, lock and key, hinges, rubber gasket, danger board,suitable angle iron stand for mounting the feeder pillar with cement concrete, including Supply and fixing of Legrand / Schnieder make 63A, 4 Pole isolator as incomer, 9 Nos 6- 32A SP MCBs as out goings, indication lamps, din channel, 6 Sqmm 3 core copper cable for invidual light control, connectors, bus bars, shroudings, gland plates and provision for 3 phase energy meter etc., complete for finished item of work and suitable wiring provision for connecting the nature switch. including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

Fabrication, supply, transportation and erection of outdoor type 16SWG CRCA sheet steel enclosure for power control cubicle/panel board etc including cutting, bending drilling, welding and reveting etc complete with 7 tank process and painting with powder coating including cost and conveyance of all materials i.e., Digital Ammeter(0-600A)-1no, Digital Voltmeter(0-500V)-1no, indicator lamps-3nos, 125 A MCCB 4 Pole as incommer and outgoings as 63 A MCCB 4 Pole- 4nos and labour charges for fixing complete finished item of work. Metring equipment makes:HPL/MECO/CONZERVE. SWITCHGEAR Makes:Legrand/Schneider. including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

Supply and Run of 25mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete. (Data 5.2.5) including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II) including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 19mm dia 'B' Class G.I Pipe of 2.5 Mtr lengthwith funnel as per National Electric Code and earth connection from electrode GI strip of 40mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to GI strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe and providing CC / Brick massonry chamber 450mmX450mmX400mm and covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification 732/1982 (Part II). including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

Earth work excavation of Trench in hard ground soil, laying of U.G cables upto 70 Sq,mm on sand cushion covering the cable with bricks and back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete. (Data 15.6.1) including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

Supply and Laying of under ground XLPE Armoured cable of the following sizes. Makes: Polycab /Havells / Finolex. For 16 Sqmm 4 Core Alluminium Cable including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

Supply and Laying of under ground XLPE Armoured cable of the following sizes. Makes: Polycab /Havells / Finolex. For 50 Sqmm 3.5 Core Alluminium Cable including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

Supply and Transportation of 90 mm double walled corrugated HDPE duct made asper specification BSEN - 500 86/IS 16205 Part- 24 : 2017 with all accessories like couplers, bends, end caps, Ts etc., complete. Makes: Bajaj / CPE including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

Supply and fixing of 250x200x120 mm size thermo plastic pole boxes IP 65 protection. Make : Hensel / Sintex / Sadhrish / EPP including labour charges for fixing etc complete item of work. including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge