WBPWD/AE/RGKHSD/NIeT-26/ 25-26-Sl-3

(e) Extra for staging beyond 4 m in any floor (Mode of measurement: area in plan x mean height of staging upto soffit of shuttering above initial 4 m)

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof. (a) upto 150 mm. thick 1st Floor

2nd Floor

3rd Floor

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground flooras per relevant IS codes. a) Pakur Variety 1stFloor

2nd Floor

3rd Floor

Roof treatment by application of non toxic polyurethane modified acrylic besed single component ( PU Roof Coat) solvent free, cold applied polyurethane modified elastomeric waterproofing membrane with excellant UV resistant capesity as per ASTM06083fa water based 100% acrylic elastomeric emulsion polymer latest coating used as protecting coating for roofs) after preparing the surface by cleaning and repairing the roof cracks by cement and sand mortar (1:4), preferably with antishrinkage mortar ( to be paid separately) if any, apply two coats along with a primingcoat ( two coats of PU Roof Coat and one cost of primer coat compatible with main product as per manufacturers specification) and reinforced with or without 20 gsm lefleece, including the cost of primer cost and basepreparation, tools & plantsbut excluding the cost f scaffolding and stagging complete as per direction of Engineer -in-charge, ( Note: If Geotexdle Fleece not wesd the rate would be reduced by Rs.5/-per Sqm)

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (a) 25 mm thick plaster 1st Floor

2nd Floor

3rd Floor

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (b) Two Coat i) Water based interior grade Acrylic Primer

Filling the gap in between aluminium frame & adjacent RCC / Brick/ Stone work by providing weather silicon sealant over 6mm dia backer rod of approved quality as per architectural drawings and direction of Engineer-in-Charge complete. Upto 5 mm depth and 5 mm width 1st Floor

2nd Floor

3rd Floor

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) i) Standard Quality

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all