PERIODICAL SERVICES BLOCK WALLING PLUMBING SANITARY FITTINGS AND OTHER BR WORKS AT DEPOT BN RECORD OFFICE TEO BSO GP HQ PAO OR AND BEG AND CENTRE KIRKEE UNDER AGE BR II IN GE CENTRAL KIRKEE

Amount

M & L for preparing plastered or unplastered old surfaces of wall including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spot and applying one coat of white (lime) wash on wall complete all as specified and directed.

All as specified in item No 01 above but applying one coat of white (Lime) wash on ceiling.

All as specified in item No 01 above but applying one coat of dry distemper (any tint) on walls complete all as specified and directed.

M & L for preparing of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of any tint all as specified and directed.

M & L for preparing of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applyinbg one coat of synthetic enamel paint any tint all as specified and directed.

M & L for preparing plastered or unplastered old surfaces of walls and applying one coat of plastic emulsion paint complete all as specified and directed.

All as specified in item No 01 above but applying one coat of cement based paint (any tint) on walls complete all as specified and directed.

M & L for preparing of old undecorated surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed.

M&L Complete removal of existing treatment of wall and applying two coat of distemper oil emulsion(OBD) over a coat of primer on wall surfaces complete.

Demolition of precast concrete block walling built in cement mortar.

M&L for Precast cement concrete block masonry using type C1 1:3:6 (20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar 1:6 complete.

Taking down cement plaster from brick or block masonry walls including raking out joints, hacking for key, scrubbing down with water etc.

M&L for rendering 15 mm thick on faces of brick/ PCC block masonry wall using cement plaster 1:4 and rendering is to be finished even and smooth (without using extra cement) complete.

M&L rendering 15 mm thick on fair faces of block masonry surfaces or surface other than fair faces of brick work or on one side of lathing in CM (1:6) complete all as specified and directed.

M & L preparation of newly plastered surface and applying two coat of cement base paint on wall etc complete all as specified and directed.

M&L for two coats of distempering walls with distemper dry, white or tinted over a coat of chalk whiting primer, on newly plastered surfaces, preparatory to distempering including preparing of new plastered surfaces of walls.

Removing of old water proofing treatment and cleaning the surface of slab and clearing with wire brushes, removing dust, foreign material, rubbish off the site to a distance n.exc. 100m complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar 1:3 on RCC roof slabs mixed with water proofing compound @ 3% mixed with by weight of cement finishing even and smooth to receive water proofing treatment complete without using extra cement all as specified and directed by Engineer-in-Charge. Note : WPC shall be measured and paid separately.

M&L for water proofing treatment over RCC slab by applying oil based bituminous primer surface @0.25 Kg/sqm and laying 3mm thik APP modified water proofing polymeric membrane with 100 mm side and end lap having weight not less than 3.50 kg/ sqm , reinforced with with non-woven polyster reinforced matt weighing not less than 160 gms/sqm polyster core having soften point not less than 1500°C, longitudinal tensile strength not less than 650 N/5cm, by torching method and applying a coat of solar reflective aluminium paint @ 0.15 Kg/Sqm on membrane surface including 24 hrs ponding test complete all as specified and as directed by the Engr-in Charge.complete all as specified and as directed by the Engr-in Charge.

Supply only integral water proofing compound

S&Fixed in repair for stop valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with capstan head handle, screwed both ends for iron pipe or for unions, with long shank and cup (concealed type), bore dia 15 mm complete.

S&F Steel tubing 15mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc and including Taking down steel tubing and connection 15mm bore complete all as specified.

S&F steel tubing 20 mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc and including Taking down steel tubing and connection 20mm bore complete all as specified.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in stone/ concrete block walls complete.

S & F in repairs water closet (Squatt Pattern) complete including provn of lime concrete bedding Orissa pattern size 580 x 440mm white integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc complete and making good to floor.

S&F in repairs for Vitreous China wash down water closet pan (EWC) (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to down or out going pipe and to flushing pipe and syphonage pipe etc. of approved quality complete.

S&F water closet seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

S & F in repairs PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e. float valve, syphon, flushpipe,brackets all as specified and directed by Engr-in-Charge.

S & F in repairs vitreous china wash hand basin white flat back size 550x 400 excluding taps waste chain and plug and porcelain stopper but incl necessary brackets CP brass wastes couplinng and other fittings all as specified.

S & F PVC connections 15 mm dia with brass nut on both ends and washers 450 mm long all as specified and directed.

S & F in repairs pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ( Hot or cold) with long screwed shanks and fly nuts screwed for iron pipes 15 mm dia all as specified.

S & F in repair bib taps cast copper alloy with butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm bore all as specified.

S&F in repairs 20 mm size gun - metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

Dismantling of floor hearth or wall tiling including cm bedding (but not backing) removing serviceable tiles in store rubbish of the premises complete.

Demolition of cement concrete unreinforced in ground floors and pavings n.exc. 15cm thickness below or above ground level all as specified.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar (1:6) complete.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 complete.

M&L for Glazed ceramic coloured tiles in vertical surface 450X300X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coat complete.

M&L for Glazed ceramic coloured tiles in vertical/skirting surface 300 X 200 X 6-7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coat complete.

M&L for 25 mm thick Cement concrete in level course for receiving floor tiles using Type B1,1:2:4 (20 mm graded aggregate) complete.

Dismantling water tanks AC/PVC of any type and any position from site of capacity 500 litres complete all as specified and directed.

Dismantling water tanks AC/PVC of any type and any position from site of capacity exc 500 litres n exc 1000 ltrs complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S&F rotational moulded polyethylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

Supply and fixed in repair provision of Ball PVC valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in 20 mm dia of the pipe.

Taking down Chowkats or frames with shutters without taking of shutters from the frames not.exc 1.5 Sqm each all as specified and directed.

Taking down Chowkats or frames with shutters without taking of shutters from the frames exc 1.5 Sqm but not exc 4 Sqm each including all as specified and directed.

Taking down shutter exc. 1.00 Sqm but n.exc. 2.00 Sqm each and removing from site complete all as directed by Engineer-in-Charge.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown on Page No. 160 of SSR 2010 part II.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitabe PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifiction & drawing.

S & F 35mm thick 2nd class hard wood glazed or skeleton shutter open rebated divided into square with plain chamfered or rounded mitred and rebated without sash bar and prepared to receive gauze or glaze, size of members as clause 8.20 (a) of SSR Pt-1.

S&F for Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces including all necessary preparation over 10 cms width or girth.

S&F galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples including necessary beading all as directed by Engr- in- Charge.

S&F 100 mm but hinges, medium weight, stainless steel all as directed by Engr- in- Charge.

S&F for aluminium handles 150 mm cast type anodised all as directed by Engr- in- Charge.

S&F for aluminium anodised barrel tower bolt 200mm long all as directed by Engr- in- Charge.

S&F for stainless steel sliding door bolts, plate type, with stainless steel bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long.

S&F flat iron 25x3mm thick conforming to Fe-290, Gde E-165 in hold fasts all as directed by Engr- in- Charge.

Hacking out old broken glass (any thickness,size,quality or description) from wooden framees metal frames or stone concrete or brick surrounds, glazing with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing fixed with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and completed.

greenstone construction

Shri Sant Cosntruction