Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.1 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹15.7 L+₹1.1 L (7.20%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹19.8 L+₹5.1 L (35.1%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹20.9 L+₹6.3 L (42.9%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹46.9 L+₹32.3 L (220.8%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹17.5 L
EMD Value
₹35,000
Closing Date
10 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 881 EWS C/o 56 APO
GE 881 EWS C/o 56 APO
PROVN OF SEPTIC TANK AND SOAKAGE WELL NEAR LINE AND SPECIAL REPAIR TO BLDG NO. T-52 QM OFFICE STORE AND T-85 OR MESS AT MENDHAR UNDER GE 881 EWS
2022_MES_543121_1
GE/PNH-33/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE 881 EWS C/o 56 APO
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
POONCH
₹35,000
Yes
13 Oct 2022
3 Aug 2022
17 Sept 2022
3 Aug 2022
10 Sept 2022
29 Aug 2022
Amount
B&R PORTION:- Construction of 30 users LLDPE septic tank designed to carry sewage and sludge, excavation in any type of soil, PCC 1:4:8 type D2 (using 40mm graded stone aggregate) below foundation, vent shaft, connections etc. conventional type all as shown on Drawing No: CE/TD-1202/2003 sheet 1/2 and 2/2 amended upo date complete all as specified and directed by Engineer-in-charge. Note: Drg is not being uploaded however it can be seen in office during working hours
Construction of soakage well 1.20 mtr dia 3.0 mtr deep below inlet (depth) from inlet pipe to ground level 45 cm, including excavation and earth work in any type of soil, PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) in foundation, wall in honey combed brick work in CM 1:4, cover slab of M-25 (Design mix), filling with brick bats, earth cushion on brick lining on top and inlet pipe 150mm dia all as shown on drawing No: CE/TD-1202/2003 sheet 1/2 and 2/2 amended upto date complete all as specified and directed by Engineer-in-charge. Note: Drg is not being uploaded however it can be seen in office during working hours
Excavation over area not exceeding 1.5m deep and and getting out in hard dense soil, complete all as specified and directed.
Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation etc for shafts, wells,cesspits, man holes, pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5m depth and getting out in hard/dense soil, complete all as specified and directed.
M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations filling and mass concrete, complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), complete all as specified and directed.
M&L for plain cement concrete 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in surface channels and drains, complete all as specified and directed.
M&L for Precast cement concrete (1:2:4) using 20mm graded crushed stone aggregate as in landings, cover slab (for manholes etc), chullah hoods, chajjas, water troughs, shelves and similar articles with plain fair faces including chamfers, weatherings, throating etc. and setting in cement mortar (1:4) including necessary form work complete all as specified and directed by Engineer-in-Charge.
S&F TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia complete all as specified and directed.
S&F 150 mm internal dia, Salt glazed & stoneware drain pipe grade ‘A’, laid in trenches and jointed with cement joints, complete all as specified and directed by Engineer -in- charge.
M&L for concrete bed to drain pipes of 150 mm dia incl packing under and haunching against the sides of pipes with concrete, after they are laid in cement concrete 1:3:6 typer C2 (using 40mm graded crushed stone aggregate) and testing including necessary form work, complete all as specified and directed.
Returning, Filling in soil including spreading, leveling, watering and well ramming in players not exc 25cm, complete all as specified and directed.
Removal of excavated material to a distance not exc 50m and depositing where directed at a level not exceeding 1.5mtr above starting point, complete all as specified and directed.
Taking down chowkhats with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed.
Taking down chowkats with shutters (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and directed.
S&F pressed steel frame of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.
S&F factory made, 2nd class hard wood, 35 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers size of members as specified complete all as speified and directed.
S&F factory made, 2nd class hard wood, 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F box type steel window glazed and gauged (combination) with side hung/ top hung shutter including box type/ projecting type hinges and steel peg stay, handle and locking arrangement (02 Nos MS tower bolts 150 mm long for each leaf) and frame made out of 1.25mm thick pressed steel frame complete including necessary cooler arrangement in window and guard bars including one coat of red oxide zinc primer and all as per sample kept at GE office and complete all as specified and directed by Engg-in-charge.
S&F sheet glass, ordinary quality, 4 mm thick and glazing with oil putty or wooden beads, in square n exc. 0.5 Sq.m pane, complete all as specified and directed.
S&F frosted glass, ordinary quality, 3 mm thick and glazing with oil putty or wooden beads, in square n exc. 0.5 Sq.m pane, complete all as specified and directed.
S&F in repair sheet glass, ordinary quality, 4 mm thick and glazing with oil putty or wooden beads, in square n exc. 0.5 Sq.m pane, complete all as specified and directed.
S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling and fixing in opening complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame complete all as specified and directed.
S&F butt hinges medium weight cold rolled mild steel 100 mm complete all as specified and directed.
S&F 150 mm of aluminium, anodised, barrel tower bolt extruded section and fixed complete all as specified and directed.
S&F 250 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and direted.
S&F 150 mm extruded aluminium alloy handles, fabricated type, fixed complete all as specified and directed.
S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and directed.
Taking up or down steel tubing and connections for 15mm bore, including cleaning for refixing or removal to store complete all as specified and directed.
S&F for 15mm dia steel tubing, " medium grade', galvanised, with all fitting; laid in trenches complete all as specified and directed.
Supply & fixed in repairs Gate Valve (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20 mm bore complete all as specified and directed.
S&F in repair bib tap 15 mm bore with flange, brass CP, with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair stop cock cast copper alloy 15 mm dia, chromium plated with wall flange screwed down, high pressure, with capstan head screwed both ends for iron pipes or for unions complete all as specified and directed.
S&F in repair PVC valve less symphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets including 32mm dia PVC. flush pipe for low level cistern including all joints complete all as specified and directed. Make:- Prayag cat part No 501 or Equaivalent cat part of make as specified in P.S..
S&F in repair 32mm dia PVC waste pipe suitable for wash hand basin or urinal etc complete all as specified and directed.
S&F in repair vitreous china squatting pan (Orissa pattern) size 580 x 440 mm, snow white, with 'P' or 's' trap, front or back inlet and integral foot rests, complete connection to drain (outgoing pipe) and to flushing pipe and syphonage pipe etc. including lime concrete bedding, complete all as specified and directed. Make:- Prayag cat part No4054 or Equaivalent cat part of make as specified in P.S.
S&F in repair PVC connection 15mm size with PTMT nuts on both ends of length 600mm complete all as specified and directed.
S&F in repair PVC (SWR) pipes 110mm dia any length single socketed with rubber ring joint, laid in floor or trenches as soil pipe, complete all as specified and directed.
S&F in repair 75 mm dia PVC floor trap with grating including jointing with solvent cement to waste pipe complete all as specified and directed.
S&F PVC (SWR) soil waste and vent pipes 75mm dia any length single socketed with rubber ring joint, laid in floor or trenches as soil pipe, complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks triple layer (Cylindrical vertical with closed top) hoisted and fixed in position all as spd in SSR Pt-I, of capacity 500 Ltrs incl with 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, including dismantling of existing tank and removing complete all as specified and as directed.
Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in base course or floor, complete all as specified and directed.
M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing with neat cement slurry @ 3 kg per Sqm complete all as specified and directed.
M&L for glazed ceramic coloured tiles (450x350mmx7mm/350x250x7mm), as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick back coat layer in cement mortar 1:4, complete all as specified and directed by Engr-In-Charge.
M&L for Non skid coloured ceramic tiles 7 - 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shed of tiles laid over and including 15mm thick screed bed in CM (1:4), complete all as specified and directed.
M&L for Non skid coloured ceramic tiles 7 - 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shed of tiles laid over and including 15mm thick screed bed in CM (1:4), complete all as specified and directed.
M&L for chequered cement concrete tiles 300x300x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.
Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.
M&L for walling of random rubble stone/boulder masonry brought upto course, well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius , built in cement mortar 1:6, complete all as specified and directed.
Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface not exceeding 20mm to face stones (lime and sand stone) and dressing of face beds and joints, complete all as specified.
Taking down cement plaster of any description on stone or brick walls etc including racking out joints, hacking for key scrubbing down with water etc. complete all as specified and directed.
M&L for rendering 15mm thick on other than fair faces of brick or stone masonry wall surfaces in cement mortar 1:4 with mixing of liquid water proofing compound @ 3 % of cement and finished the surface even and smooth without using extra cement, complete all as specified and directed. Note: WPC shall be measured and paid separately
M&L for 15mm thick rendering in CM 1:6 on other than fair faces of brick or stone masonry wall surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for 10mm thick rendering in CM 1:6 on brick or concrete surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for preparation of newly plastered / unplastered surfaces of wall including cornices pilaster etc, and applying two coats of cement base paint over a coat of white wash complete all as specified and directed.
M&L for preparation of newly plastered / unplastered surfaces of wall including cornices pilaster etc, and applying two coats of OBD over & incl a coat of chalk whiting with 1mm thick wall care putty complete all as specified and directed.
M&L for preparation of old plastered/ un-plastered wall surfaces including brooming down or steel wire brushing, scraping down, smoke soot, mould, moss, efflorescent salts, trading oil and greasy spots, and applying one coat of cement base paint, complete all as specified and directed.
M&L for complete removal of existing treatement from wall plaster and applying two coats of oil bound distemper white or any tint, over and including 1 mm thick wall care putty, complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and directed.
M&L for 50mm thick PCC 1:3:6 Type C-2 (using 40mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, including filled the joints with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.
Supply only liquid water proofing admixture complete all as specified and directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) any thickness including cover fillets complete all as specified and directed.
S&F anodised aluminium snap grid frame work for false ceiling of size 605 x 605mm complete all as specified and directed.
S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.
M&L for 6mm thick non asbestos fibre cement building fixed or laid/inserted to timber/GI/aluminium framework fixed in ceiling with screws complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed.
M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, valley gutter and similar works fixed with self tapping screws complete all as specified and directed.
Dismantling timber scantlings 40 Sqcm and over in section, in any position complete all as specified and directed.
S&F rolled mild steel works as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee,angle, channel or flat sections) including distance pieces, cleats etc Fe 290(Gde E 165), complete all as specified and directed.
S&F MS flat iron as in wind ties for roof confirming to Fe-290 Gde E-165 including hook or nuts, bolts, and necessary drilling etc complete all as specified and directed.
M&L for two coats of synthetic enamel painting on new steel surfaces over 10cms width or girth over a coat of red oxide primer etc complete all as specified and directed.
M&L for prepration of new or previously undecorated wood or wood based surface of any description over 10 cm in width or girth not other wise described, and applying two coats of synthetic enamal paint over a coat of pink primer complete all as specified and directed.
M&L for 20mm thick granite (of approved type colour) work (table rubbed & polished) in jambs, pillars, window cills, cooking plateform laid over and including 15mm thick cement screed (1:4) and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the colour of granite stone including cutting and and moulding the edges, complete all as specified and directed.
E&M PORTION:- Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.
M&L for point wiring with two single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable and one single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including PVC casing & caping (ISI marked) of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow, Tee, collars, bends etc. with PVC terminals box & cover for mounting swtches, sockets, fan regulator etc for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following :-
One light/fan point controlled by one way switch 6 Amp complete all as specified and directed.
One 3/5 pin socket outlet 6 amp on same board complete all as specified and directed.
One 3/5 pin socket outlet 6 amp independent board complete all as specified and directed.
All as per srl item No 81 here in before but for one 3 pin socket outlet 16/20 Amp independent with two single core 2.5 Sqmm size cable as phase & neutral and one single core 2.5 Sqmm as in continuous earth wire complete all as specified and directed.
S&F in repair switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified and directed.
S&F in repair switch piano flush type 16 Amp single pole one way, (ISI marked), complete all as specified and directed.
S&F in repair socket outlet 2 in 1, 3 pin, 6 Amp flush type universal, complete all as specified and directed.
S&F in repair socket outlet 2 in 1, 3 pin, 6 & 16 Amp flush type universal, complete all as specified and directed.
S&F in repair ceiling rose, 3 terminal, surface bakelite 65 mm x 50mm, PVC poly carbonate, insulated body, complete all as specified and directed.
S&F in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. for 1200 / 1400mm sweep, complete all as specified and directed.
Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store, complete all as specified and directed.
M&L for hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan, complete all as specified and directed.
S&F in replacement dome type angle holder made out of poly carbonate with metal lamp holder ISI marked with back plate fixed on PVC square block with 9 watt inverter LED bulb complete all as specified and directed.
Supply and fixing in repair LED lights fitting 1x 20W, 220V, (power factor not less than 0.9) AC decorative box type, CRCA body with driver, holder including LED inverter tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
S&F in repair connecting and commissioning of street light fittings 30 watt LED, IP-66 prootection, single piece pressure die cast aluminium housing high grade powder coated finish with heat resistant toughned clear glass cover for lamp and control gear compartment with high voltage surge protection device upto 5KV prewired including 1.6 mtr long 40mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40mmx6mm with bolts, nuts and washers and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified and directed. Make: Havells cat part No ENDURAPEARLSL30WLED757SASYTOPCMP or equivalent cat part of make as specified in PS.
S&F in repair sheet metal enclosure for DBs, SPN double door (IP43), 12 ways with 200 amps rated bus bar suitable for 240 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed.
S&F in repair MCB isolator SPN 40 amps, capacity 10 KA, 'C' series complete all as specified and directed.
S&F in repair MCB single pole 5 to 30 amps, capacity 10 KA, 'C' series complete all as specified and directed.
S&F 1100 volts grade heavy duty cable PVC insulated solid aluminium conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 m apart including 4mm dia GI suspension wire, one twin core cable flat or circular of size 10 Sqmm 2 core & including taking down old old unsv service cable connection, complete all as specified and directed.
Supply and fixing in replacement of 2 X 2 ceiling light panels with LED luminaire suitable for armstrong/grid ceiling , white powder coated frame blends seamlessly with ceiling layout, fixture size 595 x 595, 36 watt modular ceiling grid, 220 volt, 50 Hz including driver of suitable capacity , complete all as specified and directed.
S&F in replacement house service bracket (hook type) , with 3.00 mtr long GI pipe 40 mm dia medium grade, 02 Nos 90 degree bends, MS hook and stay assy complete all as specified and directed.
M&L for Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 3 of 2009 SSR Pt-I and testing complete including earth work in any type of soil, PCC 1:2:4 type B-1 as in earthing pit and cover 50mm thick reinforced with 6mm dia MS round bar @ 10cm C/C both way and MS frame, common salt, charcoal and testing on completion including dismantling unsv earthing, complete all as specified and directed.
M/S Ashok Kumar Gupta
VIKAS ENTERPRISES
M/S BHATT TRADERS
M/S KHAN TRADING COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .