Redevlopment of Daya Bhawan and Keshav Bhawan Dharmshala at Nathdwara (Finishing Work)

Amount

Providing and fixing MAIN frame for the window of the balcony in 'Jaisalmer' stone in single piece for verticals and double piece for top horizontal, with full round moulding on three sides as per drg etc, all complete as per satisfaction of ARCH / CLIENT/ENGG.

Providing and fixing of uPVC Sliding Doors of size approx. 3000x2100 mm: Frame Made from the Extruded uPVC Window Profile Section of size 125w x 50h mm having outer wall thickness of 2.5mm (+/- 0.2mm) and 3 box multi-chamber construction, Laminated (colour) finish, duly reinforced with 1.2 mm thick GI section. Frame shall have Four track configuration, three for sliding of door shutter and one for SS mosquito mesh shutter. Vertical member of frame which bears the sliding shutter load shall have aluminium rail/track for smooth sliding of shutter rollers. All the four corners shall be mitered cut & thermal welded so as to form window frame. Frame shall be milled with drain and air equalizer hole in order to be water tight and for drainage of accumulated water, if any, to outer side. Shutter : The shutter of sliding door shall be made of 39w x 69h mm Extruded 3 box multi- chamber uPVC Window Profile Section of laminated ( colour) having outer wall thickness of 2.5mm (+/- 0.2mm) provided with reinforcement of 1.5mm thick GI section duly mitered cut & thermal welded at all corners and fitted with uPVC glazing bead of size 22 x 20 mm with inner and outer co-extruded EPDM/TPE-E weather seal gaskets along with 6mm thick ISI make plain float glass. Mesh shutter shall be made of 39w x 69h mm Extruded 3 box multi-chamber UPVC Window profile section of laminated ( colour) having outer wall thickness of 2.5mm (+/- 0.2mm) provided with reinforcement of 1.5 mm thick GI section duly mitered cut & thermal welded at all corners and fitted with nylon/polymer mesh and rollers/pully.

Providing and Fixing JAISALMER stone cladding (SINGLE JOINTLESS PIECE ) onto wall including chamfering , V groove and pre-polishing all exposed edges,etc, all complete as per satisfaction of ARCH / CLIENT/ENGG.

Providing and fixing designed flooring 18-20 mm thick made up of a combination of White Marble, Jailsalmer stone, green marble all are Ist quality material etc design as per Damodar Dham Corridor front of rooms all complete as per specification and satisfaction of ARCH / CLIENT / ENGG

Providing and fixing BUILT-IN-BED made up of half brick with plaster with top finish of GREEN MARBLE minimum 32mm thk with a Jaisalmer patti of 25mm x 14mm along the periferal edges.The Top and the front sides of the Jaisalmer patti to be pre-polished before the moulding is stuck. The bottom side of the cantilever marble to be chamfered so that the marble is not visible under moulding.The in to in size of the bed from head board to inner face of the Jaisalmer patti is 2050mm approx .The in to in size of the bed in the cross direction is 1850mm approx as per drgs all complete as per satisfaction of ARCH / CLIENT/ENGG

Providing and fixing BUILT-IN-SINGLE BED made up of half brick with plaster with top finish of GREEN MARBLE minimum 32mm thk with a Jaisalmer patti of 25mm x 14mm along the periferal edges.The Top and the front sides of the Jaisalmer patti to be pre-polished before the moulding is stuck. The bottom side of the cantilever marble to be chamfered so that the marble is not visible under moulding.The in to in size of the bed from head board to inner face of the Jaisalmer patti is 2050mm approx .The in to in size of the bed in the cross direction is 950mm approx as per drgs all complete as per satisfaction of ARCH / CLIENT/ENGG.

Providing and fixing Headboard of the BED to be in 3/4" marine plywood with lipping pati on all four sides with Greenlam laminate code 731SF on the front and top edge, with vertical groove in the center below the Teakwood C.P ( 1st grade ) insert of size 6" x 12" with random holes of various sizes finished with melamine polish and 0.8mm egg-white laminate at the back all as per drgs complete and upto the satisfaction of the client/arch/engg APPROX SIZE : 1950mm x 750mm

Providing & fixing Drawers for the bed side table to be in 1/2" plywood on sides and 6mm ply for bottom with inside laminated in 0.8mm laminate (egg-white) with 3 folds telescopic channels of 'BABA' Brand. Drawer to be finished from the outside with Greenlam laminate code 731SF. Balance underpart of the drawer to be finished in 0.8MM laminate (egg white).Lipping patti to be fixed over all 4 edges of the front and on the horizontal edges of the drawer.NO PART OF THE UNDER DRAWER TO BE LEFT EXPOSED WITHOUT LAMINATE.The drawer to be fixed on 12mm thk marine ply fixed to the vertical of the stone support and to be finished in 0.8mm egg white laminate.The front facia of the drawer to be 1/2" lower than the lower ply to facilitate the opening of the drawer. A dummy plank of 12mm thk mm with laminates similar to the drawes to be attached between the drawer and the vertical of the stone.,all as per drgs and mock up room, etc , complete upto the satisfaction of the client / arch / engg SIZE of drawer APPROX :Ht- 100mm .Depth -300mm. Width- 525mm + 150mm (dummy)

Providing and Fixing E-Board Panelling(Everest Industries Ltd ) for the BEDSIDE TABLE to be finished with 'E' board with panneling done with 12mm E-boards and to be finished with 6mm textured E-Board of CASCADE code .The e-board supports to be held with each other by applying araldite on the enitre suface and screwed with each other by 50mm screws.The textured e-boards sheet to be held with the plain e- board sheet by applying araldite on the entire surface and pressing the same. the edge sheet of the e-board pannel to be stuck with araldite on the full surface and also with vinal ( small thin nails ) as per drgs all complete upto the satisfaction of client / arch / engg (Everest Industries Ltd ) ONLY FRONT FACADE TO BE CONSIDERED FOR MEASUREMENT.

Providing and fixing BUILT-IN-INDIAN SITTING made up of half brick with plaster with top finish of GREEN MARBLE minimum 32mm thk with a Jaisalmer patti of 25mm x 14mm along the periferal edges on both sides. The Top and the front sides of the Jaisalmer patti to be pre-polished before the moulding is stuck.The bottom side of the cantilever marble to be chamfered so that the marble is not visible under moulding.The in to in size of the bed from head board to inner face of the Jaisalmer patti is 800mm approx .The in to in size of the bed in the cross direction is 2125mm approx as per drgs all complete as per satisfaction of ARCH / CLIENT/ENGG

Providing and fixing Headboard of the INDIAN SITTING to be in 3/4" marine plywood with lipping pati on all four sides with Greenlam laminate code 731SF on the front and top edge, with vertical groove in the center below the Teakwood C.P ( 1st grade ) insert of size 6" x 12" with random holes of various sizes finished with melamine polish and 0.8mm egg-white laminate at the back all as per drgs complete and upto the satisfaction of the client/arch/engg APPROX SIZE : 2000mm x 750mm

Providing and fixing DOUBLE STEPPED door frame in 'JET' black granite 16 mm thk including,drilling holes for the locks ,etc which are to be covered with brass caps. Including groove, moulding, architraves, chamfering, polishing all edges all combined as per dwg all complete as per satisfaction of ARCH / CLIENT/ENGG. MODE OF MEASREMENT : DOUBLE STEPPED PATTI TO BE CONSIDERED AS ONE UNIT

Providing & Fixing DOOR marine solid flush door shutter 35mm thk.of sizes mentioned below with lipping patti 6mm thk(lipping patti to be finished with french hand polish). Greenlam laminate on shutters code 731SF on bothsides of the door 1mm thk ,with S.S hinges with S.S finish(ROYAL / SUZU Brand ) of size 4"x1.25" x 1.25". and mortice handles with lock and body brand KICH code MH223S of dia 19mm and indicator bolt of brand KICH code IB106S , and plastic door stopper on to the wall as per drg , all complete as per satisfaction of ARCH / CLIENT/ENGG.. Door Shutter Size 600x2000 mm

Providing and fixing DOUBLE STEPPED door frame 'SPOTTED INDIAN MARBLE ( RAJNAGAR 2ND QUALITY ) 18 mm thk including drilling holes for the locks to be covered with brass cap.Including full round moulding on the main frame and edge polish on the base frame,polishing all edges all combined upto the satisfaction of the Client / Arch / Engg. MODE OF MEASREMENT : DOUBLE STEPPED PATTI TO BE CONSIDERED AS ONE UNIT

Providing and fixing of openable uPVC Door Shutter : The shutters of openable door shall be made of 60w x 95h mm Extruded 3 box multi-chamber uPVC Window Profile Section of laminated( colour) having outer wall thickness of 2.75mm (+/- 0.2mm) provided with reinforcement of 2.0 mm thick GI section duly mitered cut & thermal welded at all corners, provided with center mullion (if specified in drawing) of size 60w x 80h mm uPVC Profile Section and fitted with uPVC glazing bead of size 36 x 20mm with inner and outer co-extruded EPDM/TPE-E weather seal gaskets alongwith Aluminium composite panel of approved make 3mm thick with 0.5mm thick skin & PVDF coated approved shade match with toilet door . All welding joints of frame and shutter shall be cleaned and milled with the CNC mechanism to provide uniform grooved finish on all visible joints. Hardware: Each openable door shutters is to be fixed with three load beading butt hinges and locking of doors is to be provided with multi-point transmission gear (ESPAG) with white finish powder- coated L & KEY lock . Installation at site: Complete door is to be installed on site with 10 X 100mm fastners with white cap in existing pre-finished wall cut-out cemented to Aluminum Composite Panel at all height & width and silicon glue is applied to fill up the crevices between wall and door frame. Complete in all respect as per the drawing and specification and direction of engineerin-charge.

P & fixing DOOR solid marine flush door shutter 35mm thk.DOOR shutter size approx size 550X2000 with lipping patti 6mm thk(lipping patti to be finished with putty and paint). Greenlam laminate on shutters code 107SF on outside and inside laminate of 0.8mm thk egg-white,with 3nos 'L' type hinge in S.S finish of brand 'FLORA'. and L & KEY lock which is common for all doors of all floors.The hinges is to be fixed on a C.P teakwood (grade 1 ) frame 72mm x 34mm such that the door shutter flushes with the passage wall finished surface ( POP ) in the closed position., all grooves , kani etc. all complete as per drg upto the satisfaction of client / arch / engg .

P & fixing DOOR solid marine flush door shutter 35mm thk.DOOR shutter size approx size 550X2000 with 3mm Glass of Approx Size 350x750 mm and with lipping patti 6mm thk(lipping patti to be finished with putty and paint). Greenlam laminate on shutters code 107SF on outside and inside laminate of 0.8mm thk egg-white,with 3nos 'L' type hinge in S.S finish of brand 'FLORA'. and L & KEY lock which is common for all doors of all floors.The hinges is to be fixed on a C.P teakwood (grade 1 ) frame 72mm x 34mm such that the door shutter flushes with the passage wall finished surface ( POP ) in the closed position., all grooves , kani etc. all complete as per drg upto the satisfaction of client / arch / engg .

Providing and fixing Urinal Partition in JET Black Granite 16mm thk both side mirror Polishing with moulding , edge polishing ,all complete as per satisfaction of ARCH / CLIENT/ENGG.

Providing and fixing basin counter in Jet Black Granite 16mm thk SINGLE JOINTLESS PIECE supported on 14mm spotted Indian marble and granite (part ) with double step rounded granite moulding , 2 nos round holes for the wash basin through both the stones as shown in the drgs all complete as per satisfaction of ARCH / CLIENT/ENGG. MODE OF MEASURMENT :- SANDWICH LAYER OF GRANITE AND MARBLE TO BE CONSIDERED AS ONE UNIT

Providing & fixing DOOR solid marine flush door shutter 35mm thk.Door shutter size 900x2000 mm ( approx ) covered with 3mm thk marine ply with grooves on the outside face ( with lipping patti 6mm thk to be finished with malamine polish ) .The shutter to be Greenlam laminate 1mm thk code 731SF on bothsides of shutters,with brass ballbearing hinges with S.S finish of size 5" x3" x 3". and Handle of brand KICH as per sample room with 12" C.P finish brass tower bolt of FLORA brand incl T.W frame of size approx 165 x 72 mm ( C.P Teakwood of grade 1 ) such that the frame flushes with the POP on both the sides of the wall with malemine polish, with door magnetic door stopper , and name plate for the room of size 200mm x 100mm made of S.S.304 with letters engraved and painted in black with laquer finish as per drg all complete as per satisfaction of ARCH / CLIENT/ENGG. MODE OF MEASURMENT WILL BE EACH DOOR SHUTTER CONSIDERING AS ONE UNIT.

Providing & fixing DOOR solid marine flush door shutter 35mm thk.Door shutter size 750x2000 mm ( approx ) covered with 3mm thk marine ply ( with lipping patti 6mm thk to be finished with malamine polish ) .The shutter to be Greenlam laminate 1mm thk code 731SF on bothsides of shutters,with brass ball bearing hinges with S.S finish of size 5" x3" x 3". and Handle of brand KICH as per sample room with 12" C.P finish brass tower bolt of FLORA brand incl T.W frame of size approx 165 x 72 mm ( C.P Teakwood of grade 1 ) such that the frame flushes with the POP on both the sides of the wall with malemine polish, with door magnetic door stopper , as per drg all complete as per satisfaction of ARCH / CLIENT/ENGG. MODE OF MEASURMENT WILL BE EACH DOOR SHUTTER CONSIDERING AS ONE UNIT.

Providing & fixing T.W Architrave of C.P teakwood of grade1 for DOOR of size approx 71mm x 20 mm with grooves , kanni , all as per drgs , melamine polish to be matching with door laminate as per drg all complete to the satisfaction of the client/arch/engineer. MODE OF MEASUREMENT : THE ENTIRE CROSS-SECTION OF THE ARCHITRAVE ON ONE SIDE OF THE FRAME TO BE CONSIDERED AS ONE UNIT

Providing & Fixing pair of Wardrobe shutters of approx size 450mm x 2000mm each , made out of 3/4" marine pinewood blockboard shutters ( GARNET / CENTURY / KITPLY ) with lipping patti 6mm all around.The lipping patti to be finished in French hand polish.The insides of the shutters finished with 0.8mm ivory laminate & outer exposed surfaces finished in Greenlam laminate code 731SF .Each shutter to be provided with 3nos 'L' type hinge in S.S finish of brand 'FLORA'. The 'L' type hinge is to be fixed on an extra 1.5" x 1.5" C.P T.W frame which is fixed on the jaisalmer vertical and horizontals and having T.W insert of size 6" x 12" [2 nos, 1nos outside and 1 nos inside] with random holes of various sizes finished with malemine polish,with S.S saftey chain at the top from inside 300mm long , and handles to be of brand KICH code no CHH104C of 12 mm dia and lenght 288 mm and 2nos magnetic ballcatch of size 4 in each shutter , etc,,all upto the satisfaction of the client/arch/engg as per drgs all complete. MODE OF MEASURMENT WILL BE PAIR OF SHUTTER CONSIDERED AS ONE UNIT.

Providing and Fixing Wardrobe storage horizontal single shelf within the wardrobe in Jaisalmer single side polish of 14mm thk with edge polished supported on walls on two sides and stuck with the vertical support of JAISALMER with ARALDITE on the third side,as per drg all complete as per satisfaction of ARCH / CLIENT/ENGG

Providing & fixing Drawers for the wardrobe 1/2" plywood on sides and 6mm ply for bottom with inside laminated in 0.8mm laminate (egg-white) with 3 folds telescopic channels of 'BABA' Brand . Drawer to be finished from the outside with Greenlam laminate code 731SF. Balance underpart of the drawer to be finished in 0.8MM laminate (egg white).Lipping patti to be fixed over all 4 edges of the front and on the horizontal edges of the drawer.NO PART OF THE UNDER DRAWER TO BE LEFT EXPOSED WITHOUT LAMINATE.The drawer to be fixed on 18mm thk marine ply fixed between the two drawers and and to be finished in 0.8mm egg white laminate.The front facia of the drawer to be 1/2" lower than the lower ply to facilitate the opening of the drawer.,all as per drgs and mock up room,etc, complete upto the satisfaction of the client / arch / engg SIZE of drawer APPROX :Ht- 100mm .Depth – 480mm. Width- 350mm

Providing and Fixing for All Horizontal and VERTICALS (SINGLE JOINTLESS PIECE ) in Jaisalmer stone 14mm thk (Sandwich type) bonded to each other by Araldite and size zero marble chips on the entire surface and grey cement slurry as required such that the total thickness becomes 38mm.The junction of the horizontal surface with the vertical support at any level should be such that lower stone of the horizontal sandwich slab to rest on one stone of the vertical sandwich support.(NO COIN BRACKET TO BE USED).,etc,all complete as per satisfaction of ARCH / CLIENT/ENGG

Providing and Fixing for PRE-POLISH (MACHINE MIRROR POLISH ) moulding of size 33mm x 13 mm (approx) “D” type moulding in stone upto 2400mm SINGLE PIECE which is stuck to the edge of sandwich stones by only Araldite including all "katra" at all intersections and junctions.(NO POLISHING TO BE DONE AFTER FIXING OF STONES),as per drg all complete as per satisfaction of ARCH / CLIENT/ENGG.

Providing and Fixing bedding material upto 75mm thk using C:M 1:6 ( 6PARTS OF SAND TO BE PREPARED BY ( 1: 6 PROPORTION OF MARBLE CHIPS SIZE ZERO AND SAND ) under Wardrobe , luggage rack , etc with 14mm Jaisalmer stone,as per drg all complete as per satisfaction of ARCH / CLIENT/ENGG .

Providing and fixing DUMMY PLANKS AND GLASS SHELF for the L.C.D table in three equal parts including grooves finished in greenlam laminate code 731SF on the front side and the side which is visual (between the glass shelf) , 0.8mm laminate (egg-white ) on the back side and lipping patti on all the edges with 3mm x 3mm grove on all sides.The dummy plank to be supported with a TeakWood C.P (1st grade ) section of size 22mm x 22mm incl french hand polish. A 12mm thk toughened glass to be fixed on D-bracket of 50mm x 12mm of S.S brush finish (4 nos ) all as per drgs ,etc , complete to the satisfaction of client / arch / engg. APPROX SIZE OF APPROX SIZE OF DUMMY PLANK . HT-125, DEPTH- 450mm , WIDTH - 1800MM.

Providing and Fixing mirror 6 mm thk of MODI / ASAI /SAINT GOBAIN with machine polished bevelled 1" edges to be fixed on a 12mm marine ply with lipping patti and wall paint on all sides..The ply surface to be covered entirely with araldite and than the glass to be placed in position immediately with temporary support and 12 mm dia. S.S studs are also provided as required and as approved etc, all complete as per satifaction of CLIENT / ARCH / ENGG.The APPROX SIZES ARE MENTIONED BELOW

Providing and fixing boxing for AC pipes of UPVC casing patti of size 230 mm x 75 mm for the full length of the balcony and , upto the satisfaction of the client / arch / engg.

Providing and fixing acrylic false ceiling with 'L' and 'T' shape 25mm x 25mm aluminium channels 14 guage finished with anodising 20 microns with 4mm thk acrylic sheets of approved make as per the drg ,sample same as Damodar Dham ,all complete and upto the satisfaction of the client / arch / engg

Providing and Fixing E-Board Panelling (Everest Industries Ltd ) for the L.C.D unit to be finished with 'E' board with panneling done with 18mm E-boards and to be finished with 6mm textured E-Board of CASCADE code. The e-board supports to be held with each other by applying araldite on the enitre suface and screwed with each other by 50mm screws.The textured e-boards sheet to be held with the plain e- board sheet by applying araldite on the entire surface and pressing the same. the edge sheet of the e-board pannel to be stuck with araldite on the full surface and also with vinal ( small thin nails ) as per drgs all complete upto the satisfaction of client / arch / engg (Everest Industries Ltd ) ONLY FRONT FACADE TO BE CONSIDERED FOR MEASUREMENT.

Supplying & Fixing of the Aluminium Louvers Doors (without Alu. Frame) made out from ‘Jindal’ make Alu. extrusions, 20 microns COLOUR Anodizing, Aluminium fixed louvers as per sample, S. S.(304) Hinges, Allen key Lock and also with Complete fitting at site.all complete upto the satisfaction of client / arch / engg Shutter Verticals, Top & Bottom : (K-14073) 63.50 mm x 38.10 mm x 1.70 mm (Wt.: 0.901 Kg./m), Louvers made out From 5” x 1” Pipe : (K-14040) 127.60 mm x 25.40 mm x 1.30 mm (Wt.: 1.052 Kg./m),

Supplying & Fixing of the 12 mm thk. Glass (Doors / Fixed) made out from 12 mm thk. Clear Toughened Glass (of ASAHI / SAINT GOBAIN / MODI make), with the use of the glass Fittings & Floor Springs, Silicone sealant ‘DOW CORNING’ make and also with Complete fitting at site.all complete upto the satisfaction of client / arch / engg POINT BRACKETS : ‘DORMA’ make : PFF GT (1 POINT) 4 Nos. POINT FAÇADE / WALL BRACKETS : ‘DORMA’ make : PFF GT (1 POINT) 2 Nos. POINT GLASS / WALL BRACKETS : ‘DORMA’ make : PFF G2 (2 POINT) 2 Nos. 4 POINT GLASS BRACKETS : ‘DORMA’ make : PFF G2 (4 POINT) 1 Nos. 2 POINT GLASS/GLASS BRACKETS : ‘DORMA’ make : PFF G2 (2 POINT) 1 Nos. FHB 12 FLAT HEAD FIXED BOLTS : ‘DORMA’ make : FHB M12 8 Nos. DOOR FRAME TOP WITH PIVOT : ‘NEKI’ make : NPB - 53 P 2 Nos. DOOR BOTTOM PATCH : ‘NEKI’ make : NPL - 54 2 Nos. DOOR BOTTOM PATCH LOCK : ‘NEKI’ make : NPC - 55 2 Nos. FLOOR SPRINGS : ‘NEKI’ make : NFS - 990 2 Nos. HANDLES : ‘KICH’ make : (PHH - 2524) 25 MM x 600 MM S.S. (316) SATIN FINISHED ‘H’ TYPE GLASS DOOR HANDLES 2 PAIR ALUMINIUM ‘U’ CHANNEL : 6 RM

Supplying & Fixing of the 12 mm thk. Glass (Doors / Fixed) made out from 12 mm thk. Clear Toughened Glass (of ASAHI / SAINT GOBAIN / MODI make), with the use of the glass Fittings & Floor Springs, Silicone sealant ‘DOW CORNING’ make and also with Complete fitting at site, with wooden / m.s joist of 150 mm x 150 mm to support the top pannel of the fixed glass .all complete upto the satisfaction of client / arch / engg POINT BRACKETS : ‘DORMA’ make : PFF GT (1 POINT) 4 Nos. POINT FAÇADE / WALL BRACKETS : ‘DORMA’ make : PFF GT (1 POINT) 2 Nos. POINT GLASS / WALL BRACKETS : ‘DORMA’ make : PFF G2 (2 POINT) 2 Nos. 4 POINT GLASS BRACKETS : ‘DORMA’ make : PFF G2 (4 POINT) 1 Nos. 2 POINT GLASS/GLASS BRACKETS : ‘DORMA’ make : PFF G2 (2 POINT) 1 Nos. FHB 12 FLAT HEAD FIXED BOLTS : ‘DORMA’ make : FHB M12 8 Nos.

Providing Ceiling punning in POP in line and level and right angles with AVERAGE 6mm thk including Grooves 5mmx5mm ,all scafolding at any level and height.At no point of time the maximum thk of the POP to be more than 8 mm thk.all complete upto the satisfaction of client / arch / engg

Providing Wall punning in POP in line and level and right angles with AVERAGE 10mm thk including Grooves 5mmx5mm , all scafolding at any level and height.At no point of time the maximum thk of the POP to be more than 12mm thk.all complete upto the satisfaction of client / arch / engg

POP false ceiling Providing & fixing suspended ceiling , which includes GI perimeter channels of size 0.55 mm thk. ( having one flange of 20mm and another flange of 30mm and a web of 27 mm) along with perimeter of ceiling , screw fixed to brick wall / partition etc. with the help of nylon sleeves and screws at 450mm centers. Then suspending GI intermediate channels of size 49 mm ( 0.9mm thk. With two flanges of 15 mm each) from the soffit at 900 mm centers with ceiling angles of width 25mm x 25mmx0.55 mm thick fixed to soffit up to 1.5m height with M.S. Cleat and steel expansion fasteners of half a (½) inch good quality of length 40mm , ceiling section of 0.55mm thickness having knurled web of 50mm and two flange of 26mm each with lips10.0mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 450 mm centers. 12.0 mm tapered edge POP sheet of size 900x600 is then screwfixed to ceiling section with 25mm x 8mm GI screw at 230mm centers ,Rates are including all necessary scaffolding , side pattas , cut outs , making grooves etc. as per drgs 004-R1 / 005-R1 , etc, all complete upto the satisfaction of CLIENT,ARCH,ENGG. MODE OF MEASURMENT :- MEASURMENT WILL BE IN SQM ONLY , MEASURMENT FOR HORIZONTAL / VERTICAL / INCLINED PATTAS LESS THAN 300MM WILL ALSO BE CALCULATED IN SQM AS PER ACTUALS.

UPVC LOUVER WINODWS WITH PROVISION OF EXHAUST FAN GALA : Supplying & Fixing of the UPVC louver windows with provision of exhaust fan gala, made out from ‘Jindal’ make upvc extrusions, COLOUR as per approved shade, pipe frame in top for exhaust fan gala provision and fixed glass nr. Fan, box type adjustable louvers , 5 mm thk. Frosted Glass, EPDM rubber beading, UPVC Shutter with Complete fitting at site.all complete upto the satisfaction of client / arch / engg.

Providing and fixing Granite stone slab mirror polished and machine edge cut in sill / threshold / ramp with moulding, chamfering and edge polishing ,etc complete .etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.Jalore (P-white / S-white/ Rosy Pink colour) as per satisfaction of ARCH / CLIENT/ENGG

Providing & Fixing sill / threshold / ramp with moulding, chamfering and edge polishing ,etc complete as per satisfaction of ARCH / CLIENT/ENGG.Jaisalmer Stone

Providing and Fixing tread and risers for the staircases SINGLE PIECE UPTO 1500MM including full round moulding.chamfering, groove making, as per drg all complete as per satisfaction of ARCH / CLIENT/ENGG..Stone for Landing is also in a jointless single piece of Approx size 1.5x1.5mt, Tread of Green Marble of 19mm thk

Providing and Fixing tread and risers for the staircases SINGLE PIECE UPTO 1500MM including full round moulding.chamfering, groove making,as per drg all complete as per satisfaction of ARCH / CLIENT/ENGG..Stone for Landing is also in a jointless single piece of Approx size 1.5x1.5mt, Riser of Jaisalmer Stone of 19mm thk

Providing and fixing skirting at any level of “GREEN MARBLE “ as per above specs and matching skirting joint of the flooring stone ,etc,incl wastage, all complete as per satisfaction of ARCH / CLIENT/ENGG

Providing and fixing skirting at any level of “Marble 1st Quality “ stone as per above specs and matching skirting joint of the flooring stone ,etc,incl wastage, all complete as per satisfaction of ARCH / CLIENT/ENGG

Providing material and labour for fixing hydraulic rack and pinion door closer with standard arm (Silver finish) with screws to pivoted/ hinged door of approved make for specified door width with minimum one year guarantee. All adjustment screws face fixed. Rate shall be inclusive of fixing with using the template as per manufacturer’s specification & maintain in good working condition until defect liability period. The door closer shall conform to EN 1154 standard. a) with standard/ hold open arm with two independent closing valves and latching speed adjustable by arm without mounting back plate, Closing force complying with EN 1154 2 - 4 for up to 1100 mm door shutter width Make Ozone/godrej .

Providing and fixing Curtain rod of approved design 18 gauge, 25mm diameter,304 grade Stainless Steel , brush finish with curtain ends as ball sockets and with a matching central support to be fixed over the window as per mock up room all complete upto the satisfaction of client / arch / engg

Providing and fixing Hanger rod of approved design 20 gauge, 19mm diameter,304 grade Stainless Steel , brush finish with hanger ends as ball sockets as per mock up room all complete upto the satisfaction of client / arch / engg

RCC Cutting by Slab Cutter for openings, expansion joints, or other structural modifications as per the approved drawings.Cutting of reinforced concrete (RCC) slabs of varying thickness (150mm-230mm)using slab cutter machines. Includes preparation, machine operation, dust control, and disposal of debris.The cutting shall be done with precise depth and clean edges, ensuring no damage to adjacent structures. Slab Cutter with diamond blade suitable for RCC.: Wet cutting or dry cutting with dust extraction and Disposal of debris and site cleaning after the work.for all height including all scaffolding and other necessary fittings.

Providing and fixing wooden false ceiling on a framework which is done in 45mm x 32mm CP teak wood frame to form a frame work of 600mm x 450mm grid to be hung from the ceiling with the wooden verticals of 45mm x 32mm so as to have a horizontal surface.A 6mm thk bottom ply to be fixed with screws and nails under the frame.The under structutre of the ply to be covered with 3.5mm veneer ( walnut/wenge ) with melamine polish with provision for pelmets for tubetights on all four sides and a central cutout,grooves, cutout for spot lights all inclusive as shown in the drgs all complete upto the satisfaction of client / arch / engg ONLY BOTTOM PLAN AREA TO BE CONSIDERED FOR MEASUREMENT.

Providing and Fixing, testing and commissioning of Ivory vitreous China Hindware Brand CORA VORTEX Cat No. 92569 Size 52.5x36.5x36 wall mounting type European water closet with seat cover with C.P. hinges, C.P. bolts, nuts, C.I. chair or other hanging arrangements, & rubber buffers, C.P. brass screw, washer etc and ALD-CHR-587 Health Faucet (ABS Body) with 8mm Dia, 1 Meter Long Spirochrome flex tube & Wall Hook of Jaquar Brand. complete with all accessories. Including cutting & making good the walls, floors, slab wherever required. All work complete as per satisfaction of Client/ Consultant / Engineer-in-charge.

Providing and Fixing, testing & commissioning of viterous china Hindware Brand Ivory Indian type (Orissa pattern) water closet ( Size: 58 x 45 cm Cat. No.: 20167) set in cement concrete 1:2:4 mix (1 cement: 2 coarse sand : 4 stone agrregate 20 mm nominal size) with 100 mm dia P or S . deep seal trap including cutting and making good the wall & floors complete as required. All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge.

Providing and Fixing, testing & commissioning of viterous china Hindware Brand Ivory Indian type Squatting Pan ( Size: 50 x 39 cm Cat. No.: 20140) set in cement concrete 1:2:4 mix (1 cement: 2 coarse sand : 4 stone agrregate 20 mm nominal size) with 100 mm dia P or S . deep seal trap including cutting and making good the wall & floors complete as required. All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge.

Providing and Fixing, testing & commissioning of Concealed type flush valve FLV-1085NSQ Metropole Flush Valve Dual Flow 32mm Size (Concealed Body) With Exposed Shut Off Provision & 100mm Square Plate of Jaquar Brand. Including connection to water closet & cutting and making good the walls wherever required.All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge.

Providing and Fixing, testing & commissioning of Jaquar Brand Wall mixture FUS-CHR-29281 Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) with all necessary accesseries as required.All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge.

Providing and fixing CP Hand Shower Single Flow HSH-CHR-1737 Hand Shower 95mm Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Shower Accessories SHA-SSF-549D8 Flexible Tube 8mm dia. & 1.5M Long with Nuts and SHA-SSF-555M Premium Wall Bracket for Hand Shower, 35mm dia. & 100mm Long Round Shape Rubit Cleaning System of Jaquar Brand. All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge.

Providing and Fixing, testing and commissioning of Ivory vitreous china Brand Hindware Size: 44 cm Dia Cat. No.: 10065 under counter wash basin complete recessed at the back for the reception of pipes and fittings.Including C.P brass& Wall Flange ALD-769L300x190 Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange of Jaquar Brand , C.P brass ALD-709L130 Waste Coupling 32mm Size Half Thread with 130mm height and C.P. brass basin FUS-CHR-29021N Pillar Cock with Extension Body with connection pipe of Jaquar Brand , 12 mm PVC connector with C.P. Brass check nuts for connecting stop cocks etc complete in all respect.All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge.

Providing and Fixing, testing and commissioning of Ivory vitreous china Brand Hindware Size: EDGE 45S Cat No. 91100 size 45x45x11 cm Counter top wash basin complete recessed with pipes and fittings.Including C.P brass& Wall Flange ALD-769L300x190 Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange of Jaquar Brand , C.P brass ALD-709L130 Waste Coupling 32mm Size Half Thread with 130mm height and C.P. brass basin FUS-CHR-29021N Pillar Cock with Extension Body with connection pipe of Jaquar Brand , 12 mm PVC connector with C.P. Brass check nuts for connecting stop cocks etc complete in all respect.All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge.

Providing and Fixing, testing and commissioning of C.P. brass COP-CHR-309PM Sink Mixer with Pipe Swinging Spout (Wall Mounted Model) with Connecting Legs & Wall Flanges Jaquar Brand complete as required.All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge.

Providing and Fixing, testing and commissioning of C.P. brass Bib cock FUS-CHR-29037 Bib Cock with Wall Flange Jaquar Brand complete as required.All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge.

Providing and Fixing, testing and commissioning of C.P. brass FUS-CHR-29041 Two-way Bib Cock with Wall Flange Jaquar Brand complete as required.All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge.

Providing and Fixing, testing and commissioning of C.P. brass basin FUS-CHR-29021 Pillar Cock with Extension Body Jaquar Brand complete as required.All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge.

Providing and fixing CP Revolving type Overhead Shower 120mm dia Round Shape Single Flow (Face Plate Stainless Steel & ABS Body in Chrome finish) and SHA-CHR-479L450 Shower Arm 20mm dia. & 450mm Long Round Shape with 90˚ Bend for Wall Mounted Showers with Flange with Rubit Cleaning System of Jaquar Brand. All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge.

Providing and Fixing, testing and commissioning of viterous china ENIGMA MU SENSE urinal (with integrated Sensor ) of approved make Hindware Brand Size: 31 x 37 x 64 cm Cat. No.: 96004 , wall mounted with integrated infrared sensor flush system, including fixing with wall bolts, brackets, cutting and making good the wall/floor, connection with inlet outlet pipes, battery-operated sensor unit including Long Wall Connection Pipes & Wall Flange of Jaquar Brand ,etc complete with all accessories.All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge.

Providing and Fixing C.P. brass CPA-CHR-1121RD Towel Ring Square Jaquar allied fixing with brass CP screws complete. All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge.

Providing and Fixing C.P brass AHS-CHR-1553 Toilet Roll Holder of Jaquar Brand All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge.

Providing and Fixing C.P brass AHS-1581H Towel Rack with Lower Hanger (Stainless Steel) with hook of Jaquar Brand All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge.

Providing and Fixing Recessed type ACN-CHR-1131N Soap Dish Holder of Jaquar Brand . All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge.

Providing and Fixing Soap Dispenser - Push Button SDR-WHT-DJ0010FN capacity: 0.8L material: ABS finish: white/smoked of Jaquar Brand . All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge.

Providing and Fixing C.P brass ALD-709L130 Waste Coupling 32mm Size Half Thread with 130mm height of Jaquar Brand All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge.

Providing and Fixing C.P brass& Wall Flange ALD-769L300x190 Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange of Jaquar Brand All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge..

Providing and Fixing ALD-805B 450mm Long Braided Hose with Two 15mm Nuts & Rubber Washers Without Nipple (Suitable for Geysers) of Jaquar Brand All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge.

Providing and Fixing ALD-801B 600mm Long Braided Hose with M10X1 Nipple, 15mm Nut, O-Ring & Rubber Washer (Suitable for Tall Boy Basin Mixers) of Jaquar Brand All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge.

Providing and Fixing C.P. brass CPA-CHR-1161 Double Coat Hook of Jaquar Brand . All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge.

Providing and Fixing, testing and commissioning of C.P. brass Jaquare make FUS-CHR-29053 Angular Stop Cock with Wall Flange with C.P. wall flange, Nut and Washer etc. complete as required.All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge.

Providing and Fixing Grab bar 692mm Long, Stainless Steel WAC-SAP-BR0600CSN ofJaquar Brand . All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge.

Providing and Fixing Grab bar Vertical Swing WAC-SAP-BG0800CSN of Jaquar Brand . All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge.

Providing and fixing solid state, no touch operting, fully hygienic hand drier of approved shade with single blower, with time delay, summer & winter control, music while drying, volume ON/OFF controls including providing necessary brackets, cable from drier to Plug, Plug top key and lock etc, complete as required. Jaquar Make - HDR-SSF-AK2803D Bolt touch-free infrared hand dryer with 1150W rated power & carbon brush motor Material: 304 Stainless Steel Finish: Stainless Steel Finish

Providing and fixing CPVC (Chlorinated Poly Vinyl Chloride) water supply pipes with pipe as per CTS SDR 11 (operating pressure - 7 Bar @ 82 Deg C and 28 Bar @ 23 Deg C)for pipes from 1/2 Inch to 2 Inch. Schedule 80 Pipe to be used from 2-1/2 Inch to 6 Inch. Pipes shall be joined using solvent welded CPVC fittings i.e. Tees, Elbows, Couplers, Unions, Reducers, brushings etc. including transition fittings (connection between CPVC & metal pipe/GI) i.e. Brass Adaptors (both Male & Female threaded) conforming to ASTM D-2846. ASTM F441 with only CPVC solvent cement conforming to ASTM F-493. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings.(All Terrace Looping sch80 & sdr11 for Internal Toilet) Cost shall be inclusive of (a)Making maximum of 7.5 x 7.5 cm chase in wall and floors for the pipe, making good the same by using 1:2 cement mortar over the wire mesh and providing protection to embedded pipes and fittings (in wall chase) by wrapping two layers of 400 micron polythene sheet including proper overlaps on joints complete as required or (b) Fixing/supporting the pipes (& fittings) at wall/ceiling level supported by galvanized clamps, fastener, hangers etc, as per specification. Exposed pipes to be painted of legends with direction arrow. GI pipe sleeves suitable higher size shall be provided wherever the pipes are crossing the fire rated walls / floors slab and sealing the sleeves with glass wool in between and fire sealant compound at either end all as per Project Manager's / Consultant requirement. 20mm Nominal Bore

25 mm Nominal Bore

32 mm Nominal Bore

40 mm Nominal Bore

50 mm Nominal Bore

65 mm Nominal Bore

Providing ,fixing,laying of hot water pipe insulation with tubolit closed cell polyethylene pipe insulation sleeve of approved make of 6mm thickness concealed in toilets and Shaft. For 20mm CPVC pipe

Providing ,fixing,laying of hot water pipe insulation with tubolit closed cell polyethylene pipe insulation sleeve of approved make of 6mm thickness concealed in toilets and Shaft. For 25mm CPVC pipe

Providing ,fixing,laying of hot water pipe insulation with tubolit closed cell polyethylene pipe insulation sleeve of approved make of 6mm thickness concealed in toilets and Shaft. For 32 mm CPVC pipe

Providing ,fixing,laying of hot water pipe insulation with tubolit closed cell polyethylene pipe insulation sleeve of approved make of 6mm thickness concealed in toilets and Shaft. For 32 mm CPVC pipe

Providing, fixing & testing uPVC SWR pipes confirming to IS 13592 (Type B 6KG/CM2) alongwith all required fittings like tees, bends, crosses with or without access doors jointed with approved solvent cement as per manufacturer's recommendations, fixed to walls and ceilings with clamps complete including cutting and making good the floors and walls where required complete of outer diameter. 50 mm Dia

Providing, fixing & testing uPVC SWR pipes confirming to IS 13592 (Type B 6KG/CM2) alongwith all required fittings like tees, bends, crosses with or without access doors jointed with approved solvent cement as per manufacturer's recommendations, fixed to walls and ceilings with clamps complete including cutting and making good the floors and walls where required complete of outer diameter.75mm Dia

Providing, fixing & testing uPVC SWR pipes confirming to IS 13592 (Type B 6KG/CM2) alongwith all required fittings like tees, bends, crosses with or without access doors jointed with approved solvent cement as per manufacturer's recommendations, fixed to walls and ceilings with clamps complete including cutting and making good the floors and walls where required complete of outer diameter.110 mm Dia

Providing, fixing & testing uPVC SWR pipes confirming to IS 13592 (Type B 6KG/CM2) alongwith all required fittings like tees, bends, crosses with or without access doors jointed with approved solvent cement as per manufacturer's recommendations, fixed to walls and ceilings with clamps complete including cutting and making good the floors and walls where required complete of outer diameter.160 mm Dia

Providing and fixing in position polypropylene 75 mm Multifloor traps 75MM Outlet /3 inlet Trapning design including 125 mm dia oining, embedding in concrete etc. complete rate to include making of opening in floor, marble / tiles, for fixing grating.

Providing and fixing in position polypropylene SWR "P" trap including providing necessary steel support and as per Specification. The hopper and trap shall be set in cement concrete mix 1:2:4 complete as required.100 mm inlet and 100 mm outlet.

Providing, fixing and testing of uPVC SWR inlet fittings / Height riser with two or three saddle inlets of 40, 50 mm size, fabricated from 110 mm outer dia uPVC pipes and fixed to uPVC traps with drip seal/m-seal/solvent cement joint complete in all respect.

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Door Bend 87.5 Dg. 110 mm dia Pipe

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Door Bend 87.5 Dg. 160 mm dia Pipe

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make W.C. Connector (Bend) with ring 110mm dia

Providing, fixing, jointing and testing in position the following UPVC pipes confirming to IS:4985 of 6 Kg / Sq.cm for drainage system cut to required length. Pipe to be laid below ground level in trenches upto required depth including excavation in all kind of soil (hard rock), dewatering, refilling, watering, ramming and removing the surplus excavated material and making good the same complete as required. Cost shall be inclusive of providing protection to pipe all round / haunches as per specification. 110 mm Dia

Providing, fixing, jointing and testing in position the following UPVC pipes confirming to IS:4985 of 6 Kg / Sq.cm for drainage system cut to required length. Pipe to be laid below ground level in trenches upto required depth including excavation in all kind of soil (hard rock), dewatering, refilling, watering, ramming and removing the surplus excavated material and making good the same complete as required. Cost shall be inclusive of providing protection to pipe all round / haunches as per specification. 160 mm Dia

Providing , Fixing, testing and commissioning and laying UPVC Foamcore Class-SN-8 pipes, including testing of pipes and joints etc. complete with the necessary excavation, providing and laying PCC (1:4:8), laying, refilling, compaction, dewatering, curing, retesting and disposal of any excess earth/soil from the site. The pipes shall be of following nominal bore (NB) size: External sewage water 160 mm dia

Providing, laying, jointing and testing in position the following heavy class GI pipes for under ground piping conforming to IS:1239 including all necessary fittings (conforming to IS : 1879) such as elbow, coupler & tee etc. Cost shall be inclusive of excavation, dewatering, backfilling, ramming surrounding the pipe all round with minimum 150 mm thick all round compacted silver sand and providing thrust block. (Pipe shall be provided with anti crossive protective treatment Pypkote / Coatek confirming to AWWA C 203 / IS 10221 standard complete as per specification). All work complete as per specification and satisfaction of the Engineer In Charge. 50mm Dia Nominal Bore

Providing, laying, jointing and testing in position the following heavy class GI pipes for under ground piping conforming to IS:1239 including all necessary fittings (conforming to IS : 1879) such as elbow, coupler & tee etc. Cost shall be inclusive of excavation, dewatering, backfilling, ramming surrounding the pipe all round with minimum 150 mm thick all round compacted silver sand and providing thrust block. (Pipe shall be provided with anti crossive protective treatment Pypkote / Coatek confirming to AWWA C 203 / IS 10221 standard complete as per specification). All work complete as per specification and satisfaction of the Engineer In Charge. 80mm Dia Nominal Bore

Providing and fixing in position the Mild Steel (MS) ‘C’ class pipes as SLEEVES each to be embedded in RCC walls / beams.150 mm dia

Providing and fixing in position the Mild Steel (MS) ‘C’ class pipes as SLEEVES each to be embedded in RCC walls / beams.100 mm dia

Providing and fixing 500 mm long MS hot dip galvanized PUDDLE FLANGES fabricated out of 6 mm thick MS plates of suitable size and IS:1239 heavy class pipes properly fixed in walls & top slab of tanks. The entire fittings shall be hot dipped galvanized after fabrication. Length shall be minimum 600 mm or wall thickness plus 200 mm on either side (which ever is more). 50 mm dia (Flange Ends)

Providing and fixing 500 mm long MS hot dip galvanized PUDDLE FLANGES fabricated out of 6 mm thick MS plates of suitable size and IS:1239 heavy class pipes properly fixed in walls & top slab of tanks. The entire fittings shall be hot dipped galvanized after fabrication. Length shall be minimum 600 mm or wall thickness plus 200 mm on either side (which ever is more).65 mm Dia (Flange Ends)

Providing and fixing 500 mm long MS hot dip galvanized PUDDLE FLANGES fabricated out of 6 mm thick MS plates of suitable size and IS:1239 heavy class pipes properly fixed in walls & top slab of tanks. The entire fittings shall be hot dipped galvanized after fabrication. Length shall be minimum 600 mm or wall thickness plus 200 mm on either side (which ever is more). 80 mm Dia (Flange Ends)

Providing and fixing 500 mm long MS hot dip galvanized PUDDLE FLANGES fabricated out of 6 mm thick MS plates of suitable size and IS:1239 heavy class pipes properly fixed in walls & top slab of tanks. The entire fittings shall be hot dipped galvanized after fabrication. Length shall be minimum 600 mm or wall thickness plus 200 mm on either side (which ever is more).100 mm Dia (Flange Ends)

Providing and fixing 500 mm long MS hot dip galvanized PUDDLE FLANGES fabricated out of 6 mm thick MS plates of suitable size and IS:1239 heavy class pipes properly fixed in walls & top slab of tanks. The entire fittings shall be hot dipped galvanized after fabrication. Length shall be minimum 600 mm or wall thickness plus 200 mm on either side (which ever is more).150 mm Dia (Flange Ends)

Providing and fixing C.I. Butterfly valve (Body : Grey Cast Iron, shaft : SS, Disc : SG Iron (nickel plated), Liner : HT - EPDM) of approved make with flange, washer, nuts & bolts and PN 10/16 pressure rating including rubber gasket & painting complete.(Plant Room + OHT Etc) 65 mm dia

Providing & fixing dual flanged C.I. `Y' Strainer with stainless steel fine wire mesh perforated sheet basket with necessary flange/ unions nuts, bolts and washers complete as required.50 mm dia

Providing & fixing on line turbine type flow meter with preamplifier & microprocessor based electronic flow meter mounted in plumbing plant room electrical control panel with the following features. Monitoring the total flow, Flow rate, high low arm batching and blending etc. Including electrical wiring from preamplifier to microprocessor based flow meter. Complete with all type of Plumbing & Electrical connections, accessories, wiring, conduits & supports complete with all respect. The signal from read out shall be 4-20 m.amps to be received on BAS.80 mm dia

Providing & fixing Auto Air vent for cold water supply risers, suitable for pressure not less than 15 Kg/Sq.cm.20 mm dia

Constructing Grease Trap of size as mentioned below of 1200 liquid depth in brick work of class 75 with cement mortar (1:6), inside plastering 16 mm thick with cement mortar 1:3 with floating coat ofneat cement and rough plaster on outside. Including aluminium bucket as per detail to collect the grease. RCC top slab with 2 nos. 600 x 600 mm dia medium duty, double seal manhole covers with frame (weight of covers & weight of frame 75 Kg), necessary 150 mm thick foundation concrete (1:2:4). 2500 x 1200 mm

Supply and Fixing of Precast RCC traditional Small Chattri for Elevation work including i) Precast RCC Base of Size (1000x1000)mm ii) Precast Rcc Full Pillar with both side engraving 4Nos Pillar - Approx Size 100x100mm size and 950mm Height . iii) Precast Chajja with 200mm projection supported on Pillars. iv) Precast RCC Mehrab with both side carving fixed between the RCC pillar - Mehrab Approx Size( 600mmx330mm) 50 mm thk. v) Precast RCC Dome with top,bottom and middle is decorated by ansored patti 100mm wide complete in all respect as per satisfication of Engineer-In-Charge. Including all civil work like brickwork, Plaster, StoneSlab Roofing, scaffolding clamping and fastners etc. as and where required for Chattri. Design similar to damodar dham small chattries .

Supply and Fixing of Precast RCC traditional Dome for Elevation work i) Precast Rcc Full Round Pillar 14Nos -Approx Size 250mmx250mmx2450mm ht) ii) RCC Chajja with 900mm projection and 125mm thickness supported on Pillars and Approx 22 Nos of Toddies Approx Size (200mmx200mmx100mm thk) iii) Precast RCC Mehrab with single side carving fixed between the RCC pillar - Mehrab Approx Size( 1400mmx900mm) 75mm thk. iv)RCC Dome for Approx Base slab Size (3400mmx8900mm) and dome's thickness 150mm and complete shuttering work of all height and shape including reinforcement of all above mentioned work.Decorated with Palace Pan, Kangooras, Ansort Patties, Kalash, Kamal etc complete as per damodar dham terrace dome. as per satisfication of Engineer-In-Charge. Including all Civil Work Like RCC, Brick Work, Plastering ,Stone Slab roofing for scaffolding clamping and fastners etc. as and where required for Dome as per the Direction of Engineer In Charge.

Providing and Fixing Precast RCC Jali upto 50mm Thick both side carving design for elevation.

Providing and fixing complete Bansi Paharpur stone elevation including bansi paharpur stone cladding for jambs and lintel 400mm wide and 50mm thick throughout opening. , 2 nos of Bansi Paharpur stone Carving half pillar approx size (300x150x3000mm/3800mm) . bansi paharpur Dab stone of approx size (250x125x1600)mm and 250x125 mm x approximate length 4000mm for lintel with edge and corner carving both side of dab stone. To keep the base line of the pillar to same level small traditional design bansi paharpur pedstal will be requied approx size (350x175)mm and height as per required level. The Dab stone and cladding fixed with adhesive,admixture. 8 nos of Bansi Paharpur stone both side carving arches of approx size (1400x1550x100mm thick), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade complete in all respect as per satisfication and approval of design by Engineer-In-Charge. Including all scaffolding,necessary clamping, fastners and fittings etc. as and where required.(payment shall be made for the total area of opening).

Bidder Name

Amount

BORDIA AND ASSOCIATES (GSTN-08ABJPB9107H1ZR) BID ID -3387741

JAI LAXMI TRADING & CONSTRUCTION COMPANY (GSTN-NA) BID ID -3387638

BORDIA AND ASSOCIATES (BID ID -3387741)

JAI LAXMI TRADING & CONSTRUCTION COMPANY (BID ID -3387638)