Loading…
Loading…
Tender Value
₹10.6 Cr
EMD Value
₹21.2 L
Closing Date
17 Sept 2026, 3:00 pm
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
SUB BCT
22 conditions · 6 needing a document upload
Financial Eligibility Criteria - The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure - VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (Page- 21, Para 10.2, Part-I of GCC April 2022). Attached Performa as per Annexure VIB - in Tender Document).
The tenderer should have Electrical contractors License granted by the Govt. Tenderers should submit the copy of this certificate along with the tender document. If Tenderer does not submit copy of valid Electrical contractors License with the tender document, their offer shall be summarily rejected
13 conditions · 11 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer should submit certified copy of partnership deed, Memorandum & articles of association if applicable
Tenderer should submit attested copy of copy of pan card.
Tenderer should submit details of registration of their firm with EPFO
Tenderer should submit declaration regarding employment/partnership of retired Railway Employees with the tenderer as per Annexure-I of tender document
Tenderer should submit declaration regarding relative employed with Railways as per Annexure-II of tender document
The tenderers shall submit a copy of certificate stating that they are not liable to be disqualified and all their statements/documents submitted along with the bid are true and factual. Standard format of the certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure-V, in case of other than company/proprietary firm, Annexure-V(A) shall also be submitted by each member of a partnership firm/joint venture(JV)/Hindu undivided family(HUF)/Limited liability partnership(LLP) etc as the case may be. Non submission of above certificate by the bidder shall result in summary rejection of his/their bid and it shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested by which they/he are/is qualifying the qualifying criteria mentioned in the tender document.
Tenderer should submit List of Personnel, Organization available on hand and proposed to be engaged for the subject work
Tenderer should submit List of Plant & Machinery available on hand (own) and proposed to be inducted (own) and hired to be given separately for the subject work.
Tenderer should submit List of works completed in the last three financial years giving description of work, organization for whom executed, approximate value of contract at the time of award, date of award and date of scheduled completion of work. Date of actual start, actual completion and final value of contract should also be given
Tenderer should submit List of works on hand indicating description of work, contract value, approximate value of balance work yet to be done & date of award
The tenderer whether sole proprietor / a company or a partnership firm / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected. Authorized member-Joint venture members in the JV MOU shall authorize lead member on behalf of joint venture to deal with the contract, sign the agreement or enter into contract in respect of the said tender to receive payment, to witness joint measurement of work done, to sign the measurement books and similar such action in respect of the said tender/contract. All notices/correspondences with respect to the contract would be set only to this authorized member of the JV.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society,as the case may be
Churchgate-Virar Provision of Isolator across feeding bus & X-Feeder and replacement of Control cable at TSS, SP & SSP of Mumbai Suburban Section
WR-MMCTOESUBESPT-14-2025~WR
WR-MMCTOESUBESPT-14-2025
Open
Works - General
18 Months
Mumbai, Maharashtra
₹0
₹21.2 L
14 Aug 2026
14 Aug 2026
3 Sept 2026
72 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 4,61,61,550.7 | ||
| — | 75.00 | — | — | ||
| Fabrication and supply of Galvanised steel OHE structures as per explanatory notes and technical specifications. . | — | — | — | 1,07,51,625 | |
| — | 75.00 | — | — | ||
| Erection of Galvanised steel OHE structures as per explanatory notes and technical specifications. | — | — | — | 11,40,675 | |
| — | 5.00 | — | — | ||
| Supply of galvanised steel SPS as per explanatory notes and technical specifications. | — | — | — | 7,12,380 | |
| — | 5.00 | — | — | ||
| Erection of galvanised steel SPS as per explanatory notes and technical specifications. | — | — | — | 77,250 | |
| — | 50.00 | — | — | ||
| Supply of GI fasteners as per explanatory notes and technical specifications | — | — | — | 7,665 | |
| — | 735.00 | — | — | ||
| Casting of cement concrete foundation as per explanatory notes and technical specifications. | — | — | — | 59,21,160 | |
| — | 2940.00 | — | — | ||
| Supply of 160 Sq.mm jumper wire as per explanatory notes and technical specifications. | — | — | — | 57,12,420 | |
| — | 2940.00 | — | — | ||
| Erection of 160 Sq.mm jumper wire as per explanatory notes and technical specifications. | — | — | — | 1,91,100 | |
| — | 4000.00 | — | — | ||
| Supply of 50x6 mm GI flat as per explanatory notes and technical specifications | — | — | — | 9,22,400 | |
| — | 147.00 | — | — | ||
| — | 147.00 | — | — | ||
| — | — | — | 2,17,266 | ||
| — | 147.00 | — | — | ||
| Supply of 25 Kv/1600A single pole isolator as per explanatory notes and technical specifications | — | — | — | 1,32,10,162.35 | |
| — | 147.00 | — | — | ||
| Erection of 25 Kv/1600A single pole isolator as per explanatory notes and technical specifications | — | — | — | 8,27,587.95 | |
| — | 294.00 | — | — | ||
| Supply of 25 KV post insulator as per explanatory notes and technical specifications | — | — | — | 27,95,058 | |
| — | 294.00 | — | — | ||
| Erection of 25 KV post insulator as per explanatory notes and technical specifications | — | — | — | 4,51,201.8 | |
| — | 882.00 | — | — | ||
| Supply and Erection of parallel clamp (150/160) RI no. 1051-3 including fasteners | — | — | — | 13,23,000 | |
| — | 294.00 | — | — | ||
| Supply and Erection of connector 1009-1 including fasteners. | — | — | — | 8,23,200 | |
| — | 147.00 | — | — | ||
| Supply and Erection of Castell Key interlock and Padlock size 60mm | — | — | — | 1,47,000 | |
| — | — | — | 5,98,54,078.35 | ||
| — | 39920.00 | — | — | ||
| Supply of 10Cx2.5 SQ.MM multi strand armoured Cu cable for CB control & indication circuit | — | — | — | 1,69,40,052 | |
| — | 39920.00 | — | — | ||
| Erection of 10Cx2.5 SQ.MM multi strand armoured Cu cable for CB control & indication circuit | — | — | — | 8,32,332 | |
| — | 19960.00 | — | — | ||
| Supply of 7Cx2.5 SQ.MM multi strand armoured Cu cable for CB control & indication circuit | — | — | — | 49,11,158 | |
| — | 19960.00 | — | — | ||
| Erection of 7Cx2.5 SQ.MM multi strand armoured Cu cable for CB control & indication circuit | — | — | — | 3,95,208 | |
| — | 44475.00 | — | — | ||
| Supply of 4Cx2.5 SQ.MM multi strand armoured Cu cable for 110/25KV PT | — | — | — | 62,53,185 | |
| — | 44475.00 | — | — | ||
| Erection of 4Cx2.5 SQ.MM multi strand armoured Cu cable for 110/25KV PT | — | — | — | 7,41,843 | |
| — | 20140.00 | — | — | ||
| Supply of 2Cx2.5 SQ.MM multi strand armoured Cu cable for 110/25KV PT | — | — | — | 22,25,671.4 | |
| — | 20140.00 | — | — | ||
| Erection of 2Cx2.5 SQ.MM multi strand armoured Cu cable for 110/25KV PT | — | — | — | 3,35,935.2 | |
| — | 85855.00 | — | — | ||
| Supply of 2Cx4.0 SQ.MM multi strand armoured Cu cable for 110/25KV CT & 230VAC circuit of CB | — | — | — | 2,11,24,622.75 | |
| — | 85855.00 | — | — | ||
| Erection of 2Cx4.0 SQ.MM multi strand armoured Cu cable for 110/25KV CT & 230VAC circuit of CB | — | — | — | 14,32,061.4 | |
| — | 1100.00 | — | — | ||
| Supply of HDPE pipe size: 63mm | — | — | — | 1,76,000 | |
| — | — | — | 18,20,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderdocumentIsolator.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].