Repair/Maint of street lights,Garden lights,Pathway lights and connected works at CPH Area under GE (Utilities) Udhampur.

Amount

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying of cables, foundation of poles, stays and getting out in any type of soil complete all specified & directed by Engr-in-Charge.

Returning , filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all specified & directed by Engr-in-Charge.

Removing of excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified & directed by Engr-in-Charge.

XLPE insulated, armoured, aluminium conductor cable, 1100 volts grade, heavy duty, cross sectional area 10 sq mm ,2 core, laid in trenches/ducts/through pipe complete all as specified and directed by Engr-in-Charge.

All as per Serial item No 04.00 here-in-before but cross sectional area 16 sqmm, 2 core.

All as per Serial item No 04.00 here-in-before but cross sectional area 16 sqmm, 4 core.

All as per Serial item No 04.00 here-in-before but cross sectional area 25 sqmm, 3.5 core.

Double walled corrugated pipe (DWC) of size 40 mm conforming to IS:14930(part-II)/IS 16205 Part II with necessary snap fit coupler complete all as specified & directed by Engr-in-Charge.

Painting to steel tubular poles 9/12 metre long with two coats of aluminium paint including brackets, clamps, nuts bolts, washer etc. including making yellow and black strips alternatively (30 cm width each) on pole upto 1.5 metre from the ground level and marking of pole Nos with black paint having back ground yellow as per existing complete all as specified and directed by Engr-in-Charge.

Replacement of old unserviceable rusted GI tubing brackets, 40mm bore, light grade with new GI tubing bracket, 40mm bore, light grade, 1.20 metre length ,made to shape including MS clamp with nuts, bolts and washers etc complete all as specified & directed by Engr-in-Charge.

Terminal box made out of SMC with hinged door and locking arrangements of size 140x140x95mm (in repair) including Backlite 4 way connector,M.S. Clamps suitable for pole ,PCC/MS/GI/rail etc. with bolt, nut and washer ,electrical connections including MCB SP 6-32 Amps complete all as specified and as directed by Engr-in-Charge. Make - Sintex product or equivalent in Havells/CG/Pplycab/Bajaj.

Supply and Fix insulation tape 25 mm wide 6 Mtr long ISI mark of Red-Yellow-Blue-Black-Green colour complete all specified & directed by Engr-in-Charge.

Replacement of old unserviceable cable with PVC insulated 1.5 sqmm, three core, multi stranded, copper conductor cable from junction box/OH line to street light fitting or for engagement lights complete all specified & directed by Engr-in-Charge.

Taking out UNSV UG cable of any sizes/ capacity complete all specified & directed by Engr-in-Charge.

PVC insulated multi stranded aluminum conductor PVC cable sheathed 10 Sqmm twin core (in replacement) and making connections of street light fittings with overhead lines/UG Cable complete all as specified & directed by Engr-in-Charge. Make Plaza/ Paragon/ Kalinga.

PVC insulated multi stranded aluminum conductor PVC cable sheathed 6 Sqmm twin core (in replacement) and making connections of street light fittings with overhead lines/UG Cable complete all as specified & directed by Engr-in-Charge.

Two single core PVC insulated and sheathed copper conductor cable (in repair) 2.5 Sqmm nominal size and one single core PVC insulated and sheathed copper conductor cable 2.5 Sqmm nominal size for earth continuity from main lines to the street light fittings after removing u/s one complete all as specified and directed by Engr-in-Charge.

LED flood light, 120 watt, 230 V, AC outdoor type with thermal management in multiple optics, powder coated, pressure die cast aluminium body with toughened glass visor, and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp,CCT 5700K, lumen efficacy not less than 110 lumen/watts (in repair) complete all as specified and directed by Engr-in-Charge. Note: (a) MS clamp,Brackets required for fixing of fitting are inclusive of rate quoted. (b) Necessary grouting/making good on existing surfaces in inclusive of rate quoted. (c) GI pipe of required dimensions if required at site shall be provided by the contractor.

LED flood light, 150 watt, 230 V, AC outdoor type with thermal management in multiple optics, powder coated, pressure die cast aluminium body with toughened glass visor, and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp,CCT 5700K, lumen efficacy not less than 110 lumen/watts (in repair) complete all as specified and directed by Engr-in-Charge.

LED street light fitting 90 Watt, 230 V, AC outdoor type with high pressure die cast aluminum hosing and heat resistant (in repair) complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP-66 protection, CCT 5700K, lumen efficacy not less than 110 lumen/watts complete all as specified and directed by Engr-in-Charge.

LED street light fitting 60 Watt , 230 V, AC outdoor type with high pressure die cast aluminum hosing and heat resistant (in repair) complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP-66 protection, CCT 5700K, lumen efficacy not less than 110 lumen/watts complete all as specified and directed by Engr-in-Charge.

LED street light fitting 25/30 Watt , 230 V, AC outdoor type with high pressure die cast aluminum hosing inverter backup and heat resistant (in repair) complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP-66 protection, CCT 5700K, lumen efficacy not less than 110 lumen/watts complete all as specified and directed by Engr-in-Charge.

Post top lantern, LED, type 40 watt , 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant (in repair) complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP-66 protection complete all as specified and directed by Engr-in-Charge.

LED bollard lights of 9/10 watt capacity including taking down existing unserviceable garden lights of any type/capacity complete all as specified and directed by Engr-in-Charge.

Supply and fix LED spike light fitting 9/10 watts(Multi colour), IP65, Energy Saving LED light with PDC , Aluminium body & secondary Optical lens for superior light distrubution , Efficacy > 55 Lm/W. 5700k, complete all as specified and directed by Engr-in-Charge.

Supply and fix LED Focus bush light fitting 24/25 W(Multi colour) , IP66, Energy Saving LED light with PDC , Aluminium body & secondary Optical lens for superior light distrubution , Efficacy > 110 Lm/W. 5700k, complete all as specified and directed by Engr-in-Charge.

S &F LED Tiranga Rop light 18 Mtr,IP 65,Input Power 10W/meter,Input Voltage 220-240 VAC Input frequency 50 Hzs,Input current 0.045 Amp/Mtr,Power factor 0.95,Width of strip(+/- 0.1 mm) 8 mm length/reel-18 mtrs,No of led per mtr 120 LED,LED Beam angle 120 degree ,Rope light per Colours length 6 mtr orange, 6 mtr white ,6 mtr Green,Fixing method silicone clip ,Ingrass Protection -IP -65, Ingrass protection method silicone tube ,silicone tube dimention 11.5x5.5 mm+/- 0.5 mm,working temp range-20 degree celcius to + 45 degree celcious ,working humidity range 10-90 RH complete all as specified and directed by Engr-in-Charge .

S &F 50 Watt LED system suitable for Post top fitting,system made out Aluminium dia cast ,power LED3000 K mounted on MCPCB single piece lense,Better heat desperation,external LED driver low and high cut complete all as specified and directed by Engr-in-Charge.

MCB TPN -63 Amp, 230V, 50Hz, 10 KA (in replacement) complete all as specified & directed by Engr-in-Charge.

MCB TPN -40 Amp, 230V, 50Hz, 10 KA (in replacement) complete all as specified & directed by Engr-in-Charge.

MCB TP -63 Amp, 230V, 50Hz, 10 KA (in replacement) complete all as specified & directed by Engr-in-Charge.

MCB TP -40 Amp, 230V, 50Hz, 10 KA (in replacement) complete all as specified & directed by Engr-in-Charge.

MCB DP-63 Amp, 230V, 50Hz, 10 KA, (in replacement) complete all as specified & directed by Engr-in-Charge.

MCB DP-40 Amp, 230V, 50Hz, 10 KA, (in replacement) complete all as specified & directed by Engr-in-Charge.

MCB SP-63 Amp, 230V, 50Hz, 10 KA, (in replacement) complete all as specified & directed by Engr-in-Charge.

MCB SP-40 Amp, 230V, 50Hz, 10 KA, (in replacement) complete all as specified & directed by Engr-in-Charge.

MCB SP-250 Amp, 230V, 50Hz, 10 KA, (in replacement) complete all as specified & directed by Engr-in-Charge.

Polycarbonate globe with gallery 250mm dia (in replacement) round suitable for retrofit LED lamp B22 Base (in replacement) complete all as specified & directed by Engr-in-Charge.

Polycarbonate globe with gallery 300mm dia round suitable for retrofit LED lamp B22 Base (in replacement) complete all as specified & directed by Engr-in-Charge.

Lamp holder (in replacement) PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified & directed by Engr-in-Charge.

Lamp holder (in replacement) PVC/polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified & directed by Engr-in-Charge.

LED lamp warm white/white 5 Watt (in replacement) complete all as specified & directed by Engr-in-Charge.

LED lamp warm white/white 9 Watt (in replacement) complete all as specified & directed by Engr-in-Charge.

LED lamp warm white/white 18 Watt (in replacement) complete all as specified & directed by Engr-in-Charge.

Incandescent bulb of 60/100 Watt (in replacement) complete all as specified & directed by Engr-in-Charge.

Supply and erecting steel tubular swaged poles erected to truly vertical or planted as strut complete with 6mm thick mild steel base plate(300mmx300mm), welded to pole, finial taper plug, bolts, nuts, and screws. Poles made out of ERW MS tubing conforming to IS-2713 Part-II Type 410 SP-37, 9.0mtr long including drilling of holes of required size for fixing of cross arms, painting the exposed surfaces of pole with two coats of aluminum paint over a coat of red oxide zinc chrome primer and with two coats of black bitumenous paint internally and portion embedded in concrete, making five black & white bands at lower portion of pole each 300mm wide alternately upto the height of 1.5 m and marking pole No. with black paint at suitable height including making two nos holes of suitable size in steel tubular pole by gas welding for passing PVC cable connection from junction box to security lights through pole where junction box to be fitted in pole complete all as specified and directed by Engr-in-Charge. Note: - Excavation, Earth Work and PCC in foundation shall be measured and paid for separately.

Plain cement concrete M- 7.5, (1:4:8), type D-2 (using 40mm graded crushed stone aggregates) as in foundation complete all as specified and directed by Engr-in-Charge.

Plain cement concrete, M-15, type B-0 (using 20 mm graded crushed stone aggregates) as in coping complete all as specified and directed by Engr-in-Charge.

S&F in replacement of automatic street light control switch of 8 KW three phase using Infrared sensor based Nature Switch for automatic switching of street light. Nature switch operation should be based on Natural Light Lux*level. Reqd illuminance level also have part night operation facility for min 4 hrs to max 12 hrs. The sensor along with suitabe rating power contractor (s), one Incoming and three Outgoing MCBs rating of 20-32 Amps & main load circuit wiring (copper) of min 10 sqmm should be enclosed in a pole/wall mountable rust proof, electric shock proof, termite proof and FR grade thermoplastic polycarbonate enclosure conforming to IP66 protection class-2 (Hansel make). The circuit should be also have provision for manual operation (i.e. sensor by pass option) complete all as specified and directed by Engr-in-Charge

S & F LED Highbay light with lens , 150 watt, 230 V, AC outdoor type with thermal management in multiple optics, powder coated, pressure die cast aluminium body with toughened glass visor, and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp,CCT 5700K, lumen efficacy not less than 110 lumen/watts (in repair) complete all as specified and directed by Engr-in-Charge.

HIMALAYA ENTERPRISES (BID ID -3082263)

PROACH ASSOCIATES BUILDERS & ENGINEERS (BID ID -3081676)

MOHAN LAL AND SONS (BID ID -3081122)

slathia construction works (BID ID -3083180)

PREM NATH KHAJURIA AND SONS (BID ID -3080599)

M/s Sahib Construction and engineers (BID ID -3082481)