Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.7 LAccepted-AOC AT POST ARANGAON MEHERABAD TAL DIST AHMEDNAGAR PIN 414006 | AHMEDNAGAR | AHMEDNAGAR | MAHARASHTRA | 414006 | L1 | Accepted-AOC ACCEPTED DUE TO LOWEST | |
| 2 | L2₹31.7 L+₹96,061.80 (3.12%)Rejected-AOC | L2 | Rejected-AOC REJECTED DUE TO NOT LOWEST | |
| 3 | L3₹33.2 L+₹2.4 L (7.93%)Rejected-AOC NO 98 1 1C YOJANANAGAR LOHEGAON WAGOLI ROAD NEAR SIVBHA DARBAR HOTEL LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L3 | Rejected-AOC REJECTED DUE TO NOT LOWEST |
Tender Value
₹32.3 L
EMD Value
₹65,000
Closing Date
6 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) LOHEGAON
GE (AF) LOHEGAON, PUNE -411032
ADDITION, ALTERATION OF ATS STORE, CRASH BAY AND PROVISION OF TWO CUBICAL WORK STATION WITH ASSOCIATED WORKS AT SAFETY BAY, PROVISION OF SHED AT REAR SIDE BETWEEN EXISTING GARAGE AND TRAVERSE IN 28 MMPU AND UPGRADATION OF 30 SQN DSS AND MCC AT AIR FO
2022_MES_537564_1
8597/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) LOHEGAON
As per NIT
8 documents required · 8 mandatory
₹500
Yes
GE (AF) LOHEGAON
₹65,000
Yes
12 Oct 2022
12 Jul 2022
13 Aug 2022
12 Jul 2022
6 Aug 2022
25 Jul 2022
Amount
Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed
Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n'exc 1.5 Sqm each complete all as specified and directed
Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and directed
M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:6 complete all as specified and directed
M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 solid building blocks or slabs,10cm thick and setting in cement mortar 1:6 complete all as specified and directed
M&L for PCC type B0 (1:2:4) using 12.5 mm graded crushed aggregate in coping, mass concrete set in CM 1:6 complete all as specified and directed
S & F Form work to soffits of suspended slabs such as roof, floor slabs, landings etc n.exc 200mm thick (horizontal or sloping) complete all as specified and directed
S & F Form work to edges of concrete flats nexc 20 cm wide complete all as specified and directed
M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape as required, including cracking bending, spirally for hooping columns hooking ends and binding with and including mild steel wire not less than 0.9 mm dia. complete all as specified and directed
M&L for mild steel TMT bars 5 mm dia and over upto incl 10mm cut to length bent to shape as reqd ,as in stirrups and spacers complete all as specified and directed
M&L RCC type B0 1:2:4 (12.5 mm grade aggregate ) in Slabs supported on walls , lintle beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed
S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed
S & F of Pressed steel frames sizes 105X60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed
M&L for 9mm thick prelaminated particle board medium exterior grade, prelaminated both side with decorated choice lamination fixed with aluminium beads on aluminium frame work as in wall panelling, shelves , partition, boarding complete all as specified and directed
M&L for 18mm thick Plywood grade BWR,type BB, in wall panelling, ceiling, shelves, build up Cup boards ,partition, boarding complete all as specified and directed
M&L for 0.9mm thick decorative Laminations type I,or surface finish colour and pattern approved , in wall panelling,ceiling, shelves ,partition, boarding complete all as specified and as directed.
M&L for 2nd class soft wood clean sawn as in beeding for glass work in partitions fixed with nails exc 6 sqcm and n exc 13 sqcm in section complete all as specified and directed
S&F mild steel work as in hold fasts and similar work confirming to Fe-290 or Gd -E 165 complete all as specified and directed
Material & labour for PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in hold fast , bed block and like complete all as specified and directed
S&F 35 mm 2nd class hard wood Glazed and skelton shutter, open and prapared to receive the glass, gauze etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc. (Glass / Wiremesh should be measured seperately) complete all as specified and directed
S&F for 40 mm thick Flush shutters, solid core construction ,with block board core and plywood face panels commercial type on both sides , Supply and fixed to chowkats complete all as specified and directed
S&F Steel windows (frame with shutter) with side hung shutters including projecting type hinges with steel handle ,and steel peg stay, complete with glazing bars,dovatiled or welded (Glass shall be measured Separately) complete all as specified and directed
M&L sheet glass 3mm thick ordinalry quality and glazing with oil putty or steel beads in square not exc 0.50 sqm in each pane complete all as specified and as directed.
S&F mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed.
S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.
S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.
S&F 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
S&F 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed
M&L for Door closer Aluminium (extruded section) hydraulically regulated, designation No.3 universal type,suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed
S&F 04 levers 100mm Brass Mortice lock vertical type complete all as specified and directed
S&F 02 levers 65mm Brass Mortice lock vertical type complete all as specified and directed
S&F 40mm Continuous (piano) hinges ,brass, bright finish or electro galvanised in doors of Builtup cupboards complete all as specified and directed
S&F 75 mm extruded brass handles,cast type ,polished bright fixed with brass screws in doors of Builtup cupboards complete all as specified and directed
S&F MS Rolled sections in main and cross beams, hip and jack rafters ;purlins where connected to common rafters running rails and guides for sliding doors ;fixed with angle cleats or other connecting plates and similar work conforming to Fe-290, Gde-E-165 complete all as specified and directed
S & F Mild steel screw bolts of ength of bolt n.exc 5cm long, diameter of neck 11 to 15mm (machine made) with hexagonal or square heads,at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed
M&L for preparation of new or previously untreated steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified and directed
S&F galvalume aluminium zinc coating GI based semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering / cladding to wall, fixed with self tapping screw complete all as specified and directed
S&F galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering / cladding to wall, fixed with self tapping screw complete all as specified and directed
M&L 15mm thick cement plaster on surface other than fair faces of brick work CM 1:4 finished even and smooth without using extra cement complete all as specified and directed
M&L for 5mm thick rendering in cement mortar (1:3) on fair faces of concrete ceiling surfaces , finished even & smooth without using extra cement complete all as specified and directed
Cutting out cracks to V section in existing walls , roofs or terracing ,cleaning out , wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed
Demolition of cement concrete in ground floor and pavings n'exc 15cm thickness (below or above ground level) complete all as specified and directed
M & L for 75 mm PCC 1:3:6 type C-2 using 20mm graded aggregate as in flooring , sub bases etc complete all as specified and directed
Roughening surface of old concrete floor/wall by picking ,sweeping clean and washing down with water to remove dust, etc for preparation of floor to receive floor finish complete all as specified and directed
M&L Machine cut kota stone slab flooring 20-25mm thick over & incl 20 mm thick cement screed bed in (1:6) laid and jointed in neat cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed
M&L Machine cut kota stone slab 20-25mm thick in shelves,riser of steps, skirting, dado and piller over 15 mm thick cement plaster in (1:4) laid and jointed in neat cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed
M&L for Glazed ceramic coloured tiles in vertical surfaces 300 x 200 x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match over 10mm thick CM (1:4) in dado/skirting tiles complete all as specified and directed.
M&L for Granite of any type 20 mm thick over 20mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed
Material and labour for suspended false ceiling using powder coated anodized aluminum snap grid frame work. Including Hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G I flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete and incl. 10 mm thick 60 x 60 cm size PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification complete all as specified and directed
M & L for 75 mm PCC 1:3:6 type C-2 using 20mm graded aggregate as in floors ,plinth protection and pavings finished with spike rolling to surface or making impressions of expanded metal ,whilst the concrete is green complete all as specified and directed
M&L Forming Contraction (Dummy) joints 75 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'B' in plinth protection complete all as specified and directed
M&L for preparation of old treated steel surfaces over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed
M&L for preparation of new wood or wood based surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer as directed complete all as specified and as directed.
M&L for preparation of old plastered wall surface of any description and applying one coat of Oil bound destemper complete all as specified and as directed.
M&L for preparation of new plastered wall surface of any description and applying two coat of Oil bound destemper over a coat of primer complete all as specified and as directed.
M&L for preparation of new plastered ceiling surface of any description and applying three coats of white wash complete all as specified and as directed.
M&L for preparation of old plastered ceiling surface of any description and applying one coat white wash complete all as specified and as directed.
M&L for preparation of new plastered wall surface of any description and applying three coats of white wash complete all as specified and directed
M&L for preparation of old plastered wall surface of any description and applying one coat white wash complete all as specified and as directed.
M&L for preparation of new plastered wall surface of any description and applying two coat of camouflage pattern cement based paint over a coat of chalk whiting complete all as specified and as directed.
M&L for preparation of old plastered wall surface of any description and applying one coat of cement based paint complete all as specified and as directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu.m, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface of hard / dense soil.
M & L Cement concrete 1:2:4 type B2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed
S & F Rolled mild steel in Compound girders and stanchions, lattice girders, posts, staging for water tanks and the like including caps, bases,splices etc. Builtup from two or more beem or channel sections or angles with plates, including all lattice bars, stifeners,gusset plates,etc. conforming to FE-410 - W(grade E-250) quality 'A' complete all as specified and directed
S & F Plates (Plain or Corrugated) channels,square cut or notched (ordinary or counter sunk) forming holes with out any attachment conforming to FE-410 - W(grade E-250) quality 'A' complete all as specified and directed
S & F Mild steel screw bolts of length of bolt exc 5cm but n exc 10cm long, diameter of neck 11 to 15mm (machine made) with hexagonal or square heads,at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and directed
S&F 0.63mm thick Galvanised corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers in roofs walls etc. with grade of zine coating 275 complete all as specified and directed
S&F 0.80mm thick plain galvanised mild steel sheeting as in ridges hips, valley gutters drip and straight flashings (length and girth as fixed) with L or J hooks or coach screws with grade of zinc coating 275 complete all as specified and directed
M&L Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof ,Brackets for Valley gutters ,including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified and directed
Cutting channels,grooves for inserting roof sheets in walls with or without reinforcement n exc 15cm depth and trimming surface complete all as specified and directed
M&L applying two coats of Camouflage pattern synthetic enamel painting to new surfaces steel/ CGI sheet surface exc. 10 cm width/girth over a coat of mordant solution including preparation of surfaces by removal of galvanisation if reqd, washing and cleaning,including filling with filler where reqd complete all as specified and directed
M&L for Powder coated aluminium doors, sliding doors etc. with frame of Aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, Rollers, glazing clips,handles,floor door stoper, tower bolts, rubber neoprene packing, anodised aluminium snap beading, screws,hinge type B-21 100mm long (3 no.) suitable handle (2 no.) complete all as specified and directed (Glass /particle board and wire mesh will be measured and paid seperatly).
M&Lfor Powder coated aluminium window and ventilators of, any type with sliding track of aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rollers (if required) ,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified(Glass /particle board and wire mesh will be measured and paid seperatly).
S&F Powder Coated aluminium frame (powder coating minimum thickness of powder coating 50 micron ) any colour as approved for door frames / shutters, window frames/shutters sliding/fixed and partitions etc including jointing cleat and rubber beading/linning and fixed in position with stainless steel screws complete all as specified and directed
S&FGalvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed
M & L 25mm thick PCC (1:2:4) type B-1 using 20mm graded aggregate as in sub floors, sub-bases, floors nad pavings etc. complete all as specified and directed
M&L for vitrified ceramic tiles Dark shade 9 to 10mm thick (square/ rectangular ) polished ,area of each tiles not exceeding 0.36sqm in floors, in floors and dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and directed
M&L for rendering 15mm thick in CM (1:4) on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed
M&L for rendering 15mm thick in CM (1:6) on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed
M&L for preparing of new surface of brick work, concrete plastered or unplastered surface and applying two coat of Acrylic smooth exterior paint of required shade of approved Camouflag pattern, over a coat of primer complete all as specified and directed.
M&L granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform, desk and like in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade including necessary hangar bolts , grinding to edges etc. complete all as specified and directed
Supply, laying, jointing, testing and commissioning of LT under ground cable 1100 volts grade XLPE (cross linked polythene ) armoured with galvanised round steel wire or steel strip , electric power cable heavy duty, with multi stranded aluminium conductor, laid in trenches, ducts fix on walls/poles with proper size saddles and clamp laid under roads/path/ drain /culverts or enclosed in GI pipe/ fix complete all as specified , for following size:- a) 16 Sq mm X 4.0 core
Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth and getting it out for laying of cable / pole etc. complete all as specified and directed
Soft/loose soil
Hard/dense soil
Returning/ Refilling of excavated soil including spreading levelling and well ramming in layers for any type of soil complete all as specified and directed
Removing the surplus spoil to a distance not exceeding 50 mtrs from the starting point and depositing at a height not exceeding 1.5 m above ground level complete all as specified and directed
Material and labour for stone dust sand cushioning to under ground cable, provided with a layer 8 cm before and 15 cm after laying and stretching jointing and testing the cable complete all as specified and directed [Note : Measurement will be done after punning]
Supplying and laying un-reinforced precast concrete cable cover, class I, flat, size 250mm x 150mm x 40mm for cable protection complete all as specified and directed
Supply and fix GI Pipe medium grade with all connected accessories laid in trench or road crossing complete all as specified and directed. of sizes 50 mm complete all as specified and directed
Material and labour for providing point wiring with two runs of 1.5 Sqmm multi stranded copper conductor FRLS PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core multi stranded copper conductor Flame retardant PVC insulated 1100 Volts grade wire for continuous earthing complete in and including PVC casing and caping with all fittings/fixture etc and open recessed type Plastic Enclosure( Plastic Switch Board ) ISI Marked (IS:14772) for housing switches / sockets complete all as specified and directed
One light point controlled by one switch complete all as specified and directed
One Fan point controlled by one regulator/switch complete all as specified and directed
One 3 pin socket 5 A on independent board complete all as specified and directed
One 3 pin socket 5 A on the same switch board complete all as specified and directed
Material and labour for providing point wiring with two runs of 2.5 Sqmm multi stranded copper conductor FRLS PVC insulated single core 1100 volts grade & with one run of 2.5 Sqmm single core copper stranded Flame retardant PVC insulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping with all fittings / fixture etc and open recessed type Plastic Enclosure (Plastic Switch Board) ISI marked (IS 14782) for housing one 15 A Switch / sockets complete all as specified and directed
Supply and fix switch piano flush type 5 Amp one way complete all as specified and directed
Supply and fix switch piano flush type 15 Amp one way complete all as specified and directed
Supply only socket outlet 2-in-1, 3 pin ,5 amps, flush type complete all as specified and directed
Supply only socket outlet 2-in-1, 3 pin ,5 and 15 amps, flush type complete all as specified and directed
S&F ceiling rose surface bakelite 65mm, three terminals (ISI marked) complete all as specified and directed
S & F Fan Regulator electronic step type 2 module , 230 V , 100 W complete all as specified and directed
S&F angle / batten holder insulated body with back plate for batten fittings complete all as specified & directed.
Supply and fix wall mounted fan 400 mm sweep with complete wiring and other fixing accessories as per requirement ar site.
Supply & fix heavy duty exhaust fan,metal body , AC single phase 230/ 240 V of size 300 mm sweep with louver shutter having copper bound winding including 3 core copper electric cable connection from ceiling rose to fitting terminal complete all as specified and directed
M&L for cutting wall for exhaust fan opening, the cutting must be of suitable dimension to accommodate the the exhaust fan and make good surface finish with cement plaster work. Also making of wooden frame of required size and dimension to install exhaust fan as per site condition and complete all as specified and directed Note:- The cost of wooden frame shall be included in the quoted rate
S & F Ceiling Fan 1200 mm sweep double bearing type, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) energy efficient ,white colour, 230 volts including blades, canopy and downrod including 3 core copper electric cable connection from ceiling rose to fitting terminal complete all as specified and directed
Supply & fix LED tube light along with fixture, 1x20 W( 4 feet long) surface and wall mounted LED batten, extruded aluminium housing & integrated electronic drive including connecting up with three core 0.5 Sqmm flexible copper conductor cable ceiling rose to fitting terminal complete all as specified and directed
M & L for sub main wiring with two runs of single core 4.0 Sq mm FLRSH PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 4.0 Sq mm single core Flame retardan PVC insulated unsheathed multi stranded copper conductor green colour cable for continuous earthing complete in & including PVC casing & caping with all fttiing & fixtures complete all as specified and directed (Note:- Two runs of 4 Sqmm copper cable and one run of 4 sqmm copper cable including PVC casing & caping shall be mesured and paid as one length)
Supply and fixing MCB DB SPN 12 way with 200 amps rated bus bar IP 43-IK-09 with metal double door suitable for housing of MCBs complete all as specified and directed
S&F MCB DP 63 Amp 10 kA 240 Volt, 'C' Curve and electric connections with copper thimbles complete all as specified and directed
M&L for MCB SP 6-32 Amps C curve and electric connections with copper thimbles complete all as specified and directed
M & L for sub main wiring with two runs of single core 6.0 Sq mm FLRSH PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 6.0 Sq mm single core Flame retardan PVC insulated unsheathed multi stranded copper conductor green colour cable for continuous earthing complete in & including PVC casing & caping with all fttiing & fixtures all as directed and specified. (Note:- Two runs of 6 Sqmm copper cable and one run of 6 sqmm copper cable including PVC casing & caping shall be mesured and paid as one length)
Supply and fixing MCB DB SPN 8 way with 200 amps rated bus bar IP 43-IK-09 with metal double door suitable for housing of MCBs complete all as specified and directed
M/S S H KHAN ENTERPRISES
S.R.M.K Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .