CONSTRUCTION OF GIRLS TOILET AT MIDDLE SCHOOL AMBARAN ZONE AKHNOOR DISTRICT JAMMU under SAMAGRA SHIKSHA 2025-26

Earth work in excavation in foundation by manual means over areas(exceeding 30 cm in depth and up to 1.50m depth 1.50 m in width as well as 10 sqm on plan ) , including disposal of excavated earth upto I metre for cutting of edges ,disposal earth to be leveled and neatly dressed.All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All works up to plinth level in M-7.5(1:4:8) grade, with 40mm nominal size of (crushed stone aggregates)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All works upto plinth level in M-10(1:3:6) grade, with 20mm nominal size of crushed stone aggregates

Providing and laying of damp proof course of 40 mm thick with cement concrete (1:2:4),mix with 12.50 mm thick crushed stone aggregates.

Centering and shuttering including shuttering propping and removal of form for foundation.

Brick work with F.P.S bricks of class designation 75 in 1:6 (cement: sand) mortar.

Extra for brick work in superstructure above plinth level (by manual mean)

Providing and laying in position cement concrete of specified grade of reinforced cement concrete, excluding the cost of centering and shuttering. in M-20(1:1.5:3) grade, with 20mm nominal size of crushed stone aggregates.

Reinforcement of R.C.C work in slab,beams,lintel band, sunshades including cutting,bending,placing in position and binding all complete.Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platforms.

Centering and shuttering including strutting, propping etc. and removal of form for: Edges of slab(under 20 cms wide) = 18'-0" = 5.48 m

Providing and fixing 1 mm thick M.S. steel door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angles 40x40x6mm for diagonal braces

Cement plaster in 1:6 ( 1 cement:6 fine sand ) ,15 mm thick.

12 mm thick plaster in 1:4 ,Mix.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.e.In colour such as White, Ivory, Grey, Fume Red Brown.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) qty vide item 15 mm plaster

Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacture in all shades.

Colour washing such as green blue or buff to give an even shade New work (two or more coats) with basecoat of whiting

Making plinth protection 50mm thick with cement conc .(1:3:6) ,20 mm nominal size of stone aggregates over 75mm bed of dry brick ballast,40mm nominal size of well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors.W.C. pan with lSI marked white solid plastic seat and lid.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 15mm nominal outer dia pipes.

Providing and fixing brass bib cock of approved quality. 15 mm nominal bore

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Semi rigid pipe 32 mm dia

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110 mm diametre

Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Bend 87.5° 110 mm bend

Providing and fixing of Electric Point Complete Job

Providing and placing on terrace polyethylene water storage tank ISI:12701 marked indicating BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet ,outlet and overflow pipes but without fitting and the base support for tank (syntex,star,lotus or equivalent having valid ISI License.

Carriage 0f material by mechanical transport including loading ,unloading and stacking completed sand lead up to 10 km

Carriage 0f material by mechanical transport including loading ,unloading and stacking completed stone aggreate lead up to 10 kM

Carriage 0f material by mechanical transport including loading ,unloading and stacking completed brick lead up to 8 kM

Please Enable Macros to View BoQ information