PETTY REPAIRS FOR ATTENDING DAY TO DAY EXTERNAL WATER SUPPLY COMPLAINTS AT RRRC LORRY ROAD ARMY TRAINING DK PARTIPUMP HOUSE AREA AND ALLIED AREA IN THE AREA OF AGE U WATER SUPPLY NO II UNDER GE U WATER SUPPLY DELHI CANTT 10

Amount

Labour only for Attending day to day external water supply complaints of all nature i.e. leakage in water supply pipe lines, fittings/fixtures, over flow of overhead tank, no water supply including noting the complaints in complaint register complete all as specified and as directed.

Labour only for attending day to day Electrical Supply Complaints (including sunday & Holidays) maintenance of existing LT panels including connecting electrical accessories/spares of water supply installations, electric fittings with lights, short circuits in pump house including noting the complaints in complaint register complete all as specified and as directed.. Note for srl No 1 & 2 :- Material required for attending complaints shall be measured & paid separately under respectvie items here-in-after.

Notes for Srl No. 1 & 2 :- The rates quoted by the contractor shall also deemed to be included for the following :- (i) The complaints shall be attended and the defects shall be rectified by a team of One Experienced Electrician and One Experienced Plumber assisted with One number of helper, matriculation passed qualified having minimum 03 years experience . (ii) The complaints shall be attended & defect shall be rectified within 08 hrs commencing from date and time of notifying the complaint failing which a penalty @ Rs 50/- per complaint per day (08 hrs) shall be levied upon/imposed on the contractor and recovery shall be made from Contractor's dues. (iii) In case , after checking & attending the defect,if it is not possible to rectify the defect within 08 hrs, the facts shall be brought to the notice of Engineer-in-charge by the contractor/his rep. If Engineer-in- charge is satisfied with contractor's view, no recovery will be made.

(iv) While attending the complaint of water supply/Electric supply if earth work is required then the same shall be measured and paid seperately under appropriate item of Sch 'A'/BOQ. However no extra payments shall be made for dewatering. (v) Cutting of GI pipe in position and threading is also deemed to be included in the job quoted rates (Fittings and fixtures shall be measured and paid separetely under respective items of Sch A/BOQ). (vi) All T&P required for attending the complaints shall be provided by the contractor without any extra. (vii) The pipe fitter shall always be in possession of die set complete with cutters,Taps, Pipe wrench ,Chain wrench, Caulking tools, complete set of spanners and ladders etc..,as required at site. (viii) The electrician shall always be in possession of all electrician tools, LT megger, Earth tester, multimeter, crimping tool, insulation tape, hand gloves etc. as required at site.

Supply only GI Socket, medium grade, ISI Marked complete all as specified and as directed of following sizes.

GI Socket 15 mm bore

GI Socket 20 mm bore

GI Socket 25 mm bore

GI Socket 40 mm bore

GI Socket 50 mm bore

GI Socket 80 mm bore

Supply only GI Elbow, medium grade, ISI Marked complete all as specified and as directed of following sizes.

GI Elbow 15 mm bore

GI Elbow 20 mm bore

GI Elbow 25 mm bore

GI Elbow 40 mm bore

GI Elbow 50 mm bore

Supply only GI Union, medium grade, ISI Marked complete all as specified and as directed of following sizes.

GI Union 15 mm bore

GI Union 20 mm bore

GI Union 25 mm bore

GI Union 40 mm bore

GI Union 50 mm bore

Supply only GI Nipple, medium grade, ISI Marked complete all as specified and as directed of following sizes.

GI Nipple 15 mm bore

GI Nipple 20 mm bore

GI Nipple 25 mm bore

GI Nipple 40 mm bore

GI Nipple 50 mm bore

Supply only GI reducing socket, medium grade, ISI Marked complete all as specified and as directed of following sizes.

GI reducing socket size 20 x15 mm bore

GI reducing socket size 25 x15 mm bore

GI reducing socket size 25 x20 mm bore

GI reducing socket size 40 x20 mm bore

GI reducing socket size 40 x25 mm bore

GI reducing socket size 50 x40 mm bore

GI reducing socket size 80 x50/40/25 mm bore

Supply only GI Tee, Medium Grade, complete all as specified and as directed of following sizes

GI Tee , 15 x 15 x 15 mm bore

GI Tee , 20 x 20 x 15 mm bore

GI Tee , 20 x 20 x 20 mm bore

GI Tee , 25 x 25 x 15 mm bore

GI Tee , 25 x 25 x 20 mm bore

GI Tee , 25 x 25 x 25 mm bore

GI Tee , 40 x 40 x 20 mm bore

GI Tee , 40 x 40 x 25 mm bore

GI Tee , 40 x 40 x 40 mm bore

GI Tee , 50 x 50 x 20 mm bore

GI Tee , 50 x 50 x 25 mm bore

GI Tee , 50 x 50 x 50 mm bore

Supply only GI plug, solid, heavy duty, complete all as specified and as directed of following sizes.

GI plug, 15 mm bore

GI plug, 20 mm bore

GI plug, 25 mm bore

GI plug, 40 mm bore

GI plug, 50 mm bore

Supply Only PVC 'L' type holder, suitable for aluminium rod, float ball, of following size bore complete all as specified and as directed.

15 mm bore

20 mm bore

25 mm bore

Supply only PTMT float valve, Sizes as under, with epoxy coated aluminium rod and high density plastic ball complete all as specified and as directed.

PTMT float valve, 15 mm bore

PTMT float valve, 20 mm bore

PTMT float valve, 25 mm bore

PTMT float valve, 40 mm bore

PTMT float valve, 50 mm bore

Supply and Fixing Gun metal gate valve, with iron wheel head screwed both ends for iron pipe as per IS-778 and fixed including taking out unserviceable one, complete all as specified and as directed of following sizes.

Gun metal gate valve, 15 mm bore

Gun metal gate valve, 20 mm bore

Gun metal gate valve, 25 mm bore

Gun metal gate valve, 40 mm bore

Gun metal gate valve, 50 mm bore

Supply Only lead pig bar complete all as specified and as directed.

Supply Only Spurn Yarn complete all as specified and as directed.

Supply Only Lead wool complete all as specified and as directed.

Supply Only Gland Packing any size complete all as specified and as directed.

Supply Only 3 mm thick rubber gasket complete all as specified and as directed.

Supply only 15 mm bore Bib tap of PTMT, any tint, high pressure screwed for male/ female threaded, for pipe of size 15 mm bore complete all as specified and as directed.

Supply only 20 mm bore Bib tap of PTMT, any tint, high pressure screwed for male/ female threaded, for pipe of size 20 mm bore complete all as specified and as directed.

Labour work required for Taking out/down suction pipe 80 mm to 200 mm bore from sump, of any capacity, dismantling of foot valve screwed / flanged type and re-lowering after refixing in position the same duly cleaned / minor repair, if any, required such as replacement of rubber gasket/ lifting bolts & nuts and making thread for the suction pipes off sizes etc complete all as specified and as directed.

Opening of existing sluice valve including opening of gland cover taking out with stem nut of brass or of stainless steel & refexing the same after with & including replacement of rubber packing, nut & bolts, glands dori etc complete all as specified and as directed of following sizes. Note:- Spare parts under relevant items shall be measured and paid separately under respective items.

80 mm bore

100 mm bore

150 mm bore

200 mm bore

Supply only 'stem' made out from stainless steel of sluice valve of following sizes, complete all as specified and as directed.

Stem, 80 mm bore

Stem, 100 mm bore

Stem, 150 mm bore

Stem, 200 mm bore

Supply only 'Stem Nut' made out from stainless steel suitable to match with existing sluice valve, sizes as under, complete all as specified and as directed.

Stem Nut, 80 mm bore

Stem Nut, 100 mm bore

Stem Nut, 150 mm bore

Stem Nut, 200 mm bore

Supply only 'Gland Plate' made out from Cast Iron suitable to match with existing sluice valve, sizes as under, complete all as specified and as directed.

Gland Plate, 80 mm bore

Gland Plate, 100 mm bore

Gland Plate, 150 mm bore

Gland Plate, 200 mm bore

Supply and fixing rotational moulded polyethylene water storage tank, cylindrical vertical with closed top, 500 litres capacity, tripple layered, hoisted and fixed in position after taking down as existing at site (of any capacity) complete all as specified and as directed..

Supply and fixing rotational moulded polyethylene water storage tanks, cylindrical vertical with closed top, 1000 litres capacity, tripple layered, hoisted and fixed in position after taking down as existing at site (of any capacity) complete all as specified and as directed..

Taking up or down GI steel tubing of following sizes with connections from Trenches/floors/walls including cleaning for refixing or removal complete all as specified and as directed. Note :- Excavation & earth work shall be measured & paid separetely.

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

80 mm bore

Supplying, Laying and Testing of GI steel tubing medium grade of following size in old or new position as in ceiling/walls/Floors with necessary fixing arrangements and including providing new GI fittings complete all as specified and as directed. Note :- Excavation for new location shall be measured & paid separetely.

GI steel tubing, 15 mm bore

GI steel tubing, 20 mm bore

GI steel tubing, 25 mm bore

GI steel tubing, 40 mm bore

Supplying, Laying and Testing of GI steel tubing medium grade of following size in old or new position as in Trenches with necessary fixing arrangements and including providing new GI fittings complete all as specified and as directed. Note :- (i) Excavation & earth work for new locations shall be measured & paid separetely.

GI steel tubing, 15 mm bore

GI steel tubing, 20 mm bore

GI steel tubing, 25 mm bore

GI steel tubing, 40 mm bore

GI steel tubing, 50 mm bore

GI steel tubing, 80 mm bore

Cutting and screwing the existing steel tubing of following size bore for addition & alteration or lengthening screw on pipe to form connector complete all as specified and as directed.

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

Taking up or down CI/DI Pipe of following sizes including all fittings) with spigot and socketed ends and lead tyton joints including burning out lad joints and recovering lead and including cleaning for refixing or removal and deposite to MES Storeyard complete all as specified and as directed. Note:- Excavation & earth work shall be measured & paid separetely.

100 mm bore

150 mm bore

200 mm bore

Laying only in Trenches CI/DI Pipes of following sizes with spigot and socketed ends, cleaning thoroughly and removal of all blockages if any, complete all as specified and as directed.(old serviceable pipe shall be obtained from Item no. 31) Note:- Joints and CI fittings shall be measured & paid separetely.

100 mm bore

150 mm bore

Supplying, Laying, jointing, testing and commmisioning DI Pipe of following sizes as per IS 8329-2000, class K-7 with inside cement mortar lining with spigot and socket ends laid in trenches complete all as specified and as directed . Note:- Joints shall be measured & paid separetely.

100 mm bore

150 mm bore

200 mm bore

M&L for laying and jointing CI Fittings/specials such as Tees, bends (any type, radius and angle) tapers any type, collars,tail pieces,caps and plugs Upto 200 mm bore conforming to IS: 1538-1993 complete all as specified and as directed.

Taking out/down old unserviceable UPVC/HDPE Pipes of any rating laid in trenches including all fittings complete all as specified and as directed. Note :- Excavation & earth work shall be measured & paid separetely.

(iii) 25 mm

Relaying of UPVC/HDPE pipes, of following sizes, retrieved from srl no. 35 here-in-before of any pressure rating, with new pipe fittings such as ends, elbows,unions, tees, reducing tees, adoptors, sockets, plugs, hose clips etc. fixed to walls with fixing arrangements such as saddles (snap clips), wall clips, hooks etc., complete as in trenches and also cutting, screwing and waste including jointing with jointing material complete all as specified and as directed. Note :- Excavation & earth work for new location shall be measured & paid separetely.

(iii) 25 mm

Supplying and fixing UPVC pipes, sizes as under, of pressure rating 10 kgf/cm2, heavy duty with all pipe fittings such as ends, elbows,unions, tees, reducing tees, adoptors, sockets, plugs, hose clips etc. fixed to walls with fixing arrangements such as saddles (snap clips), wall clips, hooks, protective mild steel tube sleeves , ceilings or in floors etc., complete with and cutting through walls, floors and their making good or laying in trenches and also cutting, screwing and waste including jointing with jointing material complete all as specified and as directed. Note :- Excavation & earth work for new location shall be measured & paid separetely.

(iii) 25 mm

making connection of PP-R/UPVC/HDPE distribution branch with main branch, for the following sizes by providing and fixing tee including cutting and making fusion joint etc complete all as specified and as directed.

(i) 16 to 40 mm

Supply only UPVC Socket, ISI Marked complete all as specified and as directed of following sizes

UPVC Socket 15 mm bore

UPVC Socket 20 mm bore

UPVC Socket 25 mm bore

UPVC Socket 40 mm bore

UPVC Socket 50 mm bore

Supply only UPVC Elbow, ISI Marked complete all as specified and as directed of following sizes

UPVC Elbow 15 mm bore

UPVC Elbow 20 mm bore

UPVC Elbow 25 mm bore

UPVC Elbow 40 mm bore

UPVC Elbow 50 mm bore

Supply only UPVC Union, ISI Marked complete all as specified and as directed of following sizes

UPVC Union 15 mm bore

UPVC Union 20 mm bore

UPVC Union 25 mm bore

UPVC Union 40 mm bore

UPVC Union 50 mm bore

Supply only UPVC reducing socket, ISI Marked complete all as specified and as directed of following sizes.

UPVC reducing socket, size 20 x15 mm bore

UPVC reducing socket, size 25 x15 mm bore

UPVC reducing socket, size 25 x20 mm bore

UPVC reducing socket size 50 x40 mm bore

Supply and fixing for mild steel work for manhole cover, stair case steps made of MS angle/ flats/channels etc including cutting out top and bottom to shape as directed, drilling holes, notching for wire etc flat iron fillets including all necessary drilling, bolting or rivetting etc and similar works confirming to Fe-290, Gde E-165 and applying two coats of synthetic enamel paint over a coat of red oxide primer including preperation after demolition of existing covers,steps etc complete all as specified and as directed.

Cleaning of TOI Swimming Pool of size 25 m x 13.5 m using acid and other suitable methods before filling, as required at site complete all as specified and as directed .

Cleaning of NOM Swimming Pool of size 25 m x 13.5 m using acid and other suitable methods before filling, as required at site complete all as specified and as directed .

Cleaning of RRRC Swimming Pool of size 25 m x 13.5 m using acid and other suitable methods before filling, as required at site complete all as specified and as directed .

Cleaning of DID Swimming Pool of size 50 m x 21 m using acid and other suitable methods before filling, as required at site complete all as specified and as directed .

Cleaning of Harbux stadium Swimming Pool of size 50 m x 21 m ,Diving pool of size 16 m x 16 m, Baby pool of size 6 m x 4 m ,using acid and other suitable methods before filling, as required at site complete all as specified and as directed . Note for srl item Nos 44 to 48 :- Quoted rates shall include for man power required for filling the swimming pools with water and de-watering of swimming pools.

Supply & fixing in replacement Butterfly valve of size 100 mm dia including with & including jointing material complete all as specified and as directed.

Supply & fixing in replacement Butterfly valve of size 150 mm dia including with & including jointing material complete all as specified and as directed.

Supply, fixing, jointing and testing of Cast iron Non Return valve of 100 mm size, without by pass arrangement , Swing type, conforming to IS 5312, flanged ends, pressure rating PN 1.0 complete including taking out unserviceable NRV complete all as specified and as directed at site by the Engineer-in-Charge. Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item.

Material and labour for painting on existing steel and iron surfaces with one coat of synthetic enamel paint as per existing color scheme or pattern After preparation of old surfaces of any discription over 10 cm in width or girth Complete all as specified and as directed By Engg-in-Charge. Make:- Burger/ Asian/ Nerolac of First quality.

M&L for welding and fixing of 25 to 40 mm dia GI pipe Heavy grade, length more than 5 mtr for opening and closing for valves with the help of circular wheel inside a reservoir/ sump for pool operation complete all as specified.

Testing of drinking water collected from local source (bore wells /shallow wells) in the area of AGE(U) W/S No.II and submission of detailed test report to the office of Engineer-in-Charge. (i) Carrying out minimum essential testing of water as per IS 10500-2012 mandatory for chemical colour, odour, taste, turbidity, PH value, TDS total hardness, iron, chloride, fluoride and residual free chlorine and Bacteriological total coliform organisms per 100 ml (MPN) and E Coli in 100 ml) with specific recommendation regarding suitability of water for drinking purposes. (ii) Collection of water from different sources of water ie. Sump, bore wells & shallow well in a sterilized bottle and testing in NABL Approved laboratory as mentioned in specification Note :- Rate Quoted shall also deemed to be included for the followings:- (i) Cost of sterilized bottle as required. (ii) To and fro transportation charges for collection of samples from source (sump, bore & shallow wells)

Testing of Swimming pool collected from the area of AGE(U) W/S No.II and submission of detailed test report to the office of Engineer-in-Charge. (i) Carrying out minimum essential testing of water as per IS 3328 mandatory for odour, taste, turbidity, PH value, total alkalinity as CaCo3, Aluminium, residual and free chlorine, oxygen absorbed in 4 Hours at 27 degree C, TDS, total hardness, iron, chloride, with specific recommendation regarding suitability of water for Swimming purposes. (ii) Collection of water from different sources of water ie. Swimming pools in a sterilized bottle and testing in NABL Approved laboratory as mentioned in specification Note :- Rate Quoted shall also deemed to be included for the followings:- (i) Cost of sterilized bottle as required. (ii) To and fro transportation charges for collection of samples from source swimming pool.

Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth for pipe line, etc in soft/ loose soil getting out and levelling of bottom surface to required level all as specified and as directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.

Removing excavated material to a distance not exc 50 m and depositing where directed not exc 1.5 meters above the starting point complete all as specified and as directed.

Surface dressing of uneven surfaces of natural ground, rough excavated surfaces not exceeding 15 cm deep and filled area where ordered shall be trimmed to an even surface horizontal or slopping, by removing vegetation and by scrapping high patches and filling low patches with the scrapping soil to given an even and neat look to the site. complete all as specified and as directed.

An amount of Rs 61660.00 shall be deducted from BOQ on account of schedule of credit

Rahul Enterprises

Ashish Sehgal and Co.

M/S Hind Constructions

Deven Associates

BRIJ MOHAN LAL AND CO.