Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.8 LAccepted-AOC 12 DORU DOORU VERINAG ROAD NEAR TOWN HALL ANANTHNAG JAMMU KASHMIR 192211 | ANANTNAG | JAMMU AND KASHMIR | 192211 | L1 | Accepted-AOC L1 | |
| 2 | L2₹16.5 L+₹2.5 L (17.9%)Rejected-Finance 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | L2 | Rejected-Finance L2 |
Tender Value
Refer Docs
EMD Value
₹30,142
Closing Date
9 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Khumbathang
GE Khumbathang
SPL REPAIR IN BLDG NO. T-21 OF 8 MTN DIV ARTY BDE SIG COY, SPL REPAIR TO TOILETS IN BLDG NO. P-02 and P-04 IN NORTH TCP OF 8 MTN DIV PRO UNIT AND PROVN OF STORE ROOM IN MES COMPLEX UNDER GE KHUMBATHANG
2023_MES_572881_2
GE-KHU-22-2022-23
Open Tender
Miscellaneous Works
Item Rate
180 days
GE Khumbathang
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Khumbathang
₹30,142
5 Apr 2023
11 Feb 2023
11 Mar 2023
11 Feb 2023
9 Mar 2023
18 Feb 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.
M&L for 25 mm thick PCC 1:2:4 type B-0 using12.50 mm graded crushed stone aggregate as in sub base, flooring and surface finished rough all as specified and as directed.
M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exc 0.11 and n.exc 0.18 Sqm in floors etc. including laid over 15mm thick screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge.
M&L for Glazed coloured ceramic tiles in vertical surface 300x200x 7mm thick, over 10mm redering on backing of verticles tiles in Cement Mortar (1:3) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engr-in-Charge.
Taking up or down 20 mm bore steel tubing and connections, including cleaning for re fixing or removal to stores complete allas specified and directed by Engr-in-Charge.
Taking up or down 15 mm bore steel tubing and connections, including cleaning for re fixing or removal to stores complete allas specified and directed by Engr-in-Charge.
S&F 15mm dia bore GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.
S&F 20mm dia bore GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.
S&F 16mm outer diameter 3-layer PP-R (polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UVstabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed by Engr-in-Charge.
All as per srl item no. 9 above but 20mm outer diameter complete all as specified and directed by Engr-in-Charge.
S&F in repair 15mm Cast copper alloy, Chromium Plated Bib taps fancy type with crutch or butterfly handle, screwed for iron pipe or for brass pipe of for ferrule and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair 15mm Stop valve/angle cock, fancy type, chromium plated with long shunk and cup (cncealed type) high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair for 15 mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.
Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing
S&F 100mm long butt hinges, medium weight, cold rolled mild steel
S&F 75mm long butt hinges, medium weight, cold rolled mild steel
S&F 150mm long aluminium anodised, barrel tower bolts of extruded section
S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised
S&F 125mm long extruded aluminium alloy handles, fabricated type, anodised
S&F 100mm long extruded aluminium alloy handles, fabricated type, anodised
S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy.
S&F Vitreous China squatting pan 'Orissa' pattern size 580 x 440 mm white, with integral foot rests with connection to drain and to flushing pipe antisyphonage pipe, PVC (SRW) 'P' trap including making good to floor complete all as specified and dirtected by Engr-in-Charge .
S&F in repair PVC low level valveless, flushing cistern 10 Ltr capacity with inlet , ball valve, float valve and handle & including brackets for fixing to walls and PVC flush pipe of LDPE pipe of pressure rating 6 kg (f)/ sq.cm complete all as specified and directed by Engr-in-Charge.
S&F in repair Grating doom 125 mm dia of PTMT (Minimum weight 40gms) complete all as specified & directed.
S&F in repair 15 mm PVC connection of 450mm long
Demolition of PCC (un-reinforced) in ground floors & pavings n.exc 15 CM thickness below or above ground level, complete all as specified and directed by Engr-in-Charge.
M&L for machine cut kota stone slab flooring 22-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20 mm thick screed bed in cement mortar ( 1:4) complete all as specified and directed by Engr-in-Charge.
M&L for 75mm thick cement concrete 1:3:6 type C-1 using 20 mm graded crushed stone aggregate in plinth protection, path, floors & paving including provision of necessary form work finishing the exposed surface even and smooth complete all as specified.
Demolition of brick or stone/block masonry built in cement mortar including all quions, arches, pillars etc., but excluding ashlar facings, dressed stone works and precast cement articles, complete all as specified and directed by Engr-in-Charge.
M&L for Precast cement concrete type-C-1 block masonary with solid blocks 1:3:6 (using 20mm graded crushed stone aggregate) exc. 10cm in width and setting in cement mortar (1:6), complete all as specified and directed by Engr-in-Charge.
M&L for Machine pressed precast conctete interlocking paver block (colured) 60mm thick any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment including laid over 40mm thick comacted bed of fine sand. complete all as specified and directed by Engr-n-Charge.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, roof coverings & wall
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of specified colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.
S&F Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of specified colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.
Dismantling wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness including cover fillets
Dismantling timber scantling as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in any position as in unframed work
M&L for Plain fillets of second class soft wood, sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm in square, rectangular or traingular in section, clean sawn secured with nails or brads complete all as specified and directed by Engr-in-Charge.
M&L for Plain fillets of second class soft wood, sectional area exceeding 6 Sqcm but not exceeding 13 Sqcm in square, rectangular or traingular in section, clean sawn secured with nails or brads complete all as specified and directed by Engr-in-Charge.
M&L for second class soft wood, bull nosed, splayed, chapfered or rounded on one edge or face n.exc 3 Sqcm in sectional area complete all as specified and directed by Engr-in-Charge.
S&F 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination and fixed with nails to timber frame work as in walls complete all as specified and directed Engr-in-Charge.
S&F 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame work on walls complete all as specified and directed by Engr-in-Charge.
M&L for 2nd class Hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed
M&L for 2nd class hard wood rail and style 35mm thick Plain, framed, panelled shutters Plain framed, (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated supplied and fitted to chowkats for doors.
M&L for 35mm thick of 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars) edges for receving glass etc sizws of members of shutter as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed by Engr-in-Charge.
S&F in repairs vitreous china wash hand basin (angle back type) white of size 400x400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size complete all as specified and directed by Engr-in-Charge.
Excavation in trenches, not exceeding 1.5 m wide and not exc 1.5 m in depth for foundation, laying of pipes etc and not exceeding 10 sqm on plan for manholes etc and getting out in hard/ dense soil, complete all as specified. and directed by Engr-in-Charge.
Demolition and breaking up drain pipe (salt glazed stone water or AC) of any dia set in cement mortar, complete all as specified and directed by Engr-in-Charge.
M&L for 150mm bore, reinforced concrete pipes, class NP3, laid and jointed complete with collars all as specified.
Returning filling in including spreading, levelling, watering and well remming in layers not exceeding 25cm thick in hard/dense soil complete all as specified.
Removal of excavated soil to distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed
S&F in repair 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts in roof, wall etc.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out, all as specified and directed by Engr-in-Charge.
M&L for Cement concrete type 1:4:8 D-2 using 40mm graded stone aggregate as in foundation, mass concrete etc. and similar items, complete all as specified and directed by Engr-in-Charge.
M&L for RCC nominal mix, M-15 type B-1 ( using 20 mm graded crushed stone aggregate ) as in slabs supported on walls, beams and columns in floors, roofs, complete all as specified and directed by Engr-in-Charge. (Note:-TMT bars will be masured and paid sepretly)
M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, shelves and similar work not exc.200 mm thick (horizontal or slopping) for fair finished flat surfaces all as specified and as directed.
M&L for 10 mm thick rendering in Cement Mortar (1:6) on fair surfaces of brick or concrete work and finished even & fair without using extra cement on walls complete all as specified and directed by Engr-in-Charge.
M&L for rendering 15mm thick on fair face of brick work or concrete/stone surfaces in CM 1:4 mixing with WPC @2% by weight of cement or as per manufacturer instruction and finished even and smooth without using extra cement.complete all as specified and directed by Engr-in-Charge. Note:WPC will be measured and paid sepratly.
Supply only water proofing compound.
M&L for hardcore of gauge n exc. 63 mm of broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface
Spreading and levelling excavated approved soil in layers n exc. 25 cm thick including watering and well ramming complete.
M&L for 150mm thick PCC 1:5:10 type E-2 (using 40mm graded crushed stone aggregate) as in foundation,sub base, filling & mass concrete all as specified and as directed.
M&L for rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of Fe 410-W (Gde-E-250) quality-A and painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new wooden surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M&L for preparation of new surfaces of steel of any description , over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge ..
S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165
S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-Charge.
S&F mild steel TMT bars 6 mm dia to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-Charge.
M&L for two coats of cement based paint on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engr-in-Charge.
M&L preparation of newly plastered surface and applying two coat of oil bound distemper on walls complete all as specified and as directed by Engr-in-Charge.
S&F galvanised mild steel wire cloth 0.56 mm nominal dia and with avg width of apperture 1.18 mm fixed with tinned tack or galvanised staple
S&F 5mm thick sheet glass, ordinary quality in squares n exc 0.5 sq.m in each pane glazing with oil putty complete all as specified and as directed.
Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs, 20,726.00 and any other reduction if any from quoted amount.
KASHMIR FAIR DEAL SERVICES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .