Charging of 63/25 kVA sub-stations installed by M/S EMC on feeder no. 03 and 04 emanating from Receiving Station Zainakote under Capex Budget 2024-25 Work Code PDDSS2324100142 falling under the jurisdiction of ESD Zainakote, ED-3rd (Turnkey Basis)

Amount

Charging of 63/25 kVA sub-stations installed by M/S EMC on feeder no. 03 & 04 emanating from Receiving Station Zainakote under Capex Budget 2024-25 Work Code PDDSS2324100142 falling under the jurisdiction of ESD Zainakote, ED-3rd (Turnkey Basis)

Supply, installation, testing and commissioning of S.T. poles 9.0 Meter long swaged Type conforming to ST 410 SP-33, IS: 2713 amended up-to date well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level with earthing arrangement through bolt welded on pole, provided at height of 300mm above the planting depth which should be 1.5 mtr (SP 33). Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded.

Supply, installation, testing and commissioning of S.T. poles 8.0 Meter long swaged Type conforming to ST 410 SP-155, IS: 2713 amended up-to date well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level with earthing arrangement through bolt welded on pole, provided at height of 300mm above the planting depth which should be 1.5 mtr (SP 15). Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded.

Supply, installation, testing and commissioning of Gapless Surge Arrestor, 9 KV, 10 KA, Lighting Arrestor Set Heavy duty with Polymer Housing, Station type conforming to IEC-99-4 Capable of withstanding Maximum continuous operating voltages (M.C.O.V)

Supply, installation, testing and commissioning of 11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type conforming: IS-2544, IS: 5340 (Part-III) and SS: 9921 (Part-I -V)

Supply, fabrication, installation, testing and commissioning of G.I Channel X/V crossarm Iron / Angle Iron /Flat of sizes including Top Bracket, clamps and collars. (As per KPDCL approved drawing)

Supply, laying, installation, testing and commissioning of 35 mm² Cable (4C) from LT Line to SMDB, 1.1kV Grade, Armoured,XLPE Insulated Stranded Conductor FRLS type including lugs/thimbles/clamps/cable ties.

Supply, laying, installation, testing and commissioning of 16mm2, 2 core Cable (2C) from SMDB to consumer Meter 1.1KV Grade Armoured XLPE Insulated Stranded conductor FRLS type including lugs/thimbles/clamps/cable ties.

Supply, Laying, installation, testing and commissioning of 50 mm² ACSR

Supply, Fixing, Testing and commissioning of 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Supply, Fixing, Testing and commissioning of 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Design, Fabrication, Supply, installation, testing and commissioning of LT Distribution Box for 25 kVA DTR with 40 Amp MCCB 3P 16 kA for incomer & 25 Amp MCCB 3P 16 kA/10 kA 1 No each (=2No.) for Outgoing Circuits

Design, Fabrication, Supply, installation, testing and commissioning of LT Distribution Box for 63 kVA DTR with 100 Amp MCCB 3P 16 kA for incomer & 100 Amp MCCB 3P 16 kA 1 No. and 63 Amp MCCB 3P 16 kA 1 No.s for Outgoing Circuits.

Design, Fabrication, Supply, installation, testing and commissioning of 3 Phase Distribution Box IP 54 made from 20 SWG CRCA MS sheet by Deep Drawn Method with Powder Coating. Internal size of the box shall be 225mm x 285mm x 120mm used for connection through ABC line and for giving connections to the consumers 3phase-1 incoming 4 outgoing I/C- 1, O/G-2-4 (200 A, 0.415 kV) for RYB Phase. The DB should have Bottom entery of Cable with proper Glands/grommets-Safety Screws and Back Clamp suitable for 11/9/8 Mtr ST Pole or 9/8 mtr PCC poles with Nuts/bolts

Providing and laying Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body along with baby insulators, nuts/bolts, G.O Set & lighting arrestor as per IS 2629/85, GI nuts &bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

Providing & Laying of Pole Earthing Complete by GI Pipe 40 mm 3 mtr long through GI Strip 25x3 mm

Supply & Fixing of Galvanized Nuts and Bolts

Supply & Fixing of Insulating Piercing Connectors

Supply & FIxing of Suspension/Tension Clamp with eye hook Suspension - 250 Tension - 100

Providing and painting of poles with single coat of red oxide an two coats of Aluminum Paint

Supply & Fixing of PG Clamps/ Wedge connectors

Supply of material & Laying of Cement bottoming of poles (1:2:4 Mix as per REC Standards 0.40 M3 per Pole)

Supply of material & Laying of Cement bottoming of poles (1:2:4 Mix as per REC Standards 0.48 M3 per Pole)

M/S PEARL ENTERPRISES (BID ID -2210196)

M/S QADRI ELECTRICALS (BID ID -2214363)