Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.6 LAccepted-AOC 25 1 SIMRA P O KIDWAI NAGAR KANPUR UP 208011 | KANPUR | KANPUR | UP | 208011 | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹14.6 L+₹1.0 L (7.45%)Rejected-Finance | L2 | Rejected-Finance HIGHER THAN L1 BIDDER | |
| 3 | L3₹16.0 L+₹2.4 L (17.4%)Rejected-Finance | L3 | Rejected-Finance HIGHER THAN L1 BIDDER |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
7 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
MAJ SRINATH PL
GE I Kanpur Cariappa Road Cantt Kanpur 208004
PERIODICAL SERVICE AND CONNECTED WORK IN ZONE-III AREA UNDER AGE B/R-II OF GE (I) KANPUR
2023_MES_622601_1
GE(I)/KAN/T-58 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
KANPUR
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE(I) KANPUR
₹50,000
Yes
3 Jan 2024
10 Oct 2023
14 Nov 2023
10 Oct 2023
7 Nov 2023
24 Oct 2023
Amount
Complete removal of existing treatment i.e. white wash, colour wash, cement paint etc. on wall and ceiling complete, with help of hand opeated sander or by manual where it is feasible and preparing the surfaces smooth including necessary repair to depressions/cracks by wall care putty/POP and applying two coats of exterior weather proof anti algae (Product : Asian Paints ACE Sparc or equivalent of makes as specified) 100% acrylic emulsion over a coat of exterior water based primer. The primer and paint will be applied through with aireless spray techonology with max working pressure of 3300 PSI by Trucare graco machine / Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working,complete all as specified and directed.
Complete removal of existing treatment i.e. white wash, colour wash, cement paint etc. on wall and ceiling complete, with help of hand opeated sander or by manual where it is feasible and preparing the surfaces smooth including necessary repair to depressions/cracks by wall care putty/POP and applying two coats of exterior weather proof anti algae (Product : Asian Paints Apex or equivalent of makes as specified) 100% acrylic emulsion over a coat of exterior water based primer. The primer and paint will be applied through aireless spray techonology with max working pressure of 3300 PSI by Trucare Graco machine / Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working,complete all as specified and directed.
Complete removal of existing treatment i.e. white wash, colour wash, cement paint etc. on wall and ceiling complete, with help of hand opeated sander or by manual where it is feasible and preparing the surfaces smooth including applying a coat of wall care putty 1 mm thick with 2 coats of oil bound distemper by Trucare Graco machine / Airless paint sprayer (Vands Engineering solution) / airless sprayer machine surya 9 (Jaguar) / control pro 190 air paint sprayer (wagner) and capable of operational single spray gun with a maximum materials hose length 150m working,complete all as specified and directed.
Preparation of old decorated surfaces of ceiling including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc of surfaces & leveling/ edging the disturbed places/edges using necessary filling of wall care putty to obtain smooth regular/ even finish using sand paper and applying One coats of oil bound distemper (of any colour) by trucare Graco machine / Airless paint sprayer (Vands Engineering solution) / airless sprayer machine surya 9 (Jaguar) / control pro 190 air paint sprayer (wagner) and capable of operational single spray gun with a maximum materials hose length 150m working,, complete all as specified and directed .
Preparation of old decorated surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc of surfaces & leveling/ edging the disturbed places/edges using necessary filling of wall care putty to obtain smooth regular/ even finish using sand paper and applying One coats of oil bound distemper (of any colour) by trucare Graco machine / Airless paint sprayer (Vands Engineering solution) / airless sprayer machine surya 9 (Jaguar) / control pro 190 air paint sprayer (wagner) and capable of operational single spray gun with a maximum materials hose length 150m working,, complete all as specified and directed .
M & L for Preparation of old decorated surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white wash, .on any surface of walls. (note: Using necessary filling whereever required as directed by Engineer in charge.
M & L for Preparation of old surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying two coats of white wash, .on any surface of walls. (note: Using necessary filling whereever required as directed by Engineer in charge).
M & L for Preparation of old decorated surfaces of ceiling including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white wash, .on any surface of ceiling (note: Using necessary filling whereever required as directed by Engineer in charge.
M & L for Preparation of old decorated surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of colour wash, on any surface of walls. (note: Using necessary filling whereever required as directed by Engineer in charge.
M & L for Preparation of old decorated surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying two coats of colour wash on any surface of walls. (note: Using necessary filling whereever required as directed by Engineer in charge.
M & L for Preparation of old painted wooden surfaces over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint of approved shade, complete all as specified.
M & L for Preparation of old painted wooden surfaces over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint of approved shade, complete all as specified.
Preparation of old steel or iron surfaces over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint (of approved shade) complete all as specified.
M&L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying one coat of cement base paint (any colour) on wall including necessary material , labour ,T & P, scaffolding as required at site complete all as specified and as directed.
Complete removal of existing treatment i.e. white wash ,colour wash , cement paint etc. on walls complete, applying two coats of cement based paint (any colour) over a coat of cement primer complete all as specified and directed.all as specified and directed.
M & L for Preparation of old decorated surfaces of walls or any surface including ceiling tile surface including cornice plaster etc including brooming down or steel wire brushing etc to remove all dust and all loose scales of lime/colour wash etc and applying one coat of interior plastic emulsion paint of any colour and any surface complete all as specified and directed .
M & L for complete removal of existing paint including cleaning and preparation of surface and applying french polishing with one or more coats on surface of any description width or girth including a coat of wood filler on old surface complete all as specified and directed .
M&L for obliterating old writing of any description, n exc 0.1 sq. M, with paint to match existing work
M&L for writing letters or figures (Block,Roman,Italic or Indian (n exc. 30 CM high)
M&L for Stops, commas, short lines, dashes, hyphens, brackets, etc.
Demolition of brick work in any position, built in cement morter ,complete all as specified and directed by the Engineer in Charge.
M&L for brick work with sub class 'B' brick using old size bricks straight or curved on plan exc 6.0 m mean radius built in CM (1:6) complete all as specified and directed.
M&L for brick work with sub class 'B' brick using old size bricks straight or curved on plan exc 6.0 m mean radius (EXCEPT BRICKS) built in CM (1:6) complete all as specified and directed. Note : Serviceable bricks retrieved from Serial item No 22 here-in-before shall be used after proper washing.
Taking down cement plaster on brick wall etc including hacking out joints hacking for key, scrubbing down with water etc (Note: work shall be carried out upto triple storey height of building including necessary scafolding, T&P, safety measures etc )
M&L 15 mm thick rendering on fair faces of brick or concrete surfaces in CM 1:4 on fair faces of concrete or brick surface finished even & fair without using extra cement complete all as specified and directed (Note: work shall be carried out upto triple storey height of building including necessary scafolding, T&P, safety measures etc )
M & L for Acid/Alkali wash and drying of any existing efflorescence and leaving the wall to dry for min. 3 days and watch for any extra efflorescence. The surface to be washed with clean water and left to dry for 3 to 4 hours before application of further treatment complete all as specified and directed.
Supplying and Applying, two components acrylic polymer modified cementitious coating on new masonry surfaces devoid of plaster, with Hydrostatic resistance upto 5 bars with forced coverage of 1.75 Kg per Sqm in two coats using roller or brush with a gap of 4 to 6 hrs between the coats. The coats to be applied shall be perpendicular to each other complete all as specified and directed. Note : The Coverage is to be strictly maintained for film formation.
Supplying and Applying , one component penetrative-cum-film forming interior waterproofing solution, with negative hydrostatic resistance upto 4 bar, with forced coverage of 350 ml per Sqm single coat using brush or roller, complete all as specified and directed.
M&L 15 mm thick rendering on other than fair faces of brick or concrete surfaces in CM 1:6 finished even & fair without using extra cement complete all as specified and directed (Note: work shall be carried out upto triple storey height of building including necessary scafolding, T&P, safety measures etc )
M&L for dubbing out average 15mm thick on irregular face of walls/ceiling (when specifically ordered in writing) on fair faces of brick or concrete surfaces in CM 1:4 complete all as specified and directed (Note: work shall be carried out upto triple storey height of building including necessary scafolding, T&P, safety measures etc )
S&F in repairs for wire netting 0.90mm dia and12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings,stanchions, beams, etc. including all laps, cutting and waste, complete all as specified.
M&L 10 mm thick cement plaster as in ceiling of brick or concrete surfaces in CM 1:3 finished even & fair without using extra cement complete all as specified and directed
M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint of any colour over a coat of primer complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls including cornices plaster etc and applying two coat oil bound distemper (any colour) over a coat of primer over applying a coat of wall care putty on wall including rubbing with sand paper to achieve a smooth surface and sharp straight edges etc complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall and applying three coat of white wash complete all as specified and directed.
M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
Hacking out old broken glasses of any description from metal frames including punching or drilling out old glazing pins/springs clips and fixing new ones.
M&L for 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane
M&L for 3mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane
S & F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
S&F, stainless steel curtain rods of 25mm dia as in doors/ windows pelmets.SS brackets fancy type , including screws and other necessary fitting for fixing brackets SS Funnels for 25 mm dia dropry rods, fixed at each end of rods complete all as specified and directed. or equivalent as specified.
S&F 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inculing PVC sheet fillets as per manufacturer instructions nclusive of Solvent Cement and fixing at site.
Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595mm of approved texture with Semi perforated 12mm thick micro tegular edged GRG false ceiling tiles, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm, cross-T of size 15 x 32 mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing, complete all as specified and directed.
Welding in repairs n. exc 2.5cm in length and thickness of metal exc 9mm but n.exc 20mm as in steel window, ventilators, doors, etc. as directed.
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)
M & L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection & finishing surface even and smooth with using extra cement complete all as specified and directed.
Khushi Muskan Engineer & Developer
ESKEY COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .