Civil - ET-01 - Improvement works to DFC room

Dismantling of brick wall to provide passsage for toilet and clearing the debris away from the site including cost of all materials, labour, lead, lift, etc., complete.

Chipping the old damaged wall and ceiling plastering, cleaning the surface without any loose materials,clearing the debris away from the site including cost of materials, labour, lead, lift, watering, curing, etc., complete.

Supplying, fabricating and fixing inposition Aluminium fixed partition with 63.50x38.10x2mm @1.127 kg/m Alu.section at 900mm C/C in vertical direction and 1300mm @ C/C at horizontal direction Alu. clips, of size 17.27x17.15x1.40mm@ 0.175 kg/m and using 12 mm thick both side laminated with 1 side Melamine finish including cost of all materilas, all necessary aluminium fittings such as glazing clips, cleats,screws, rubber beadings, all labours, power consumptions required for fabrications, drilling holes in RCC column, slab, masonry walls wherever necessary with powerdrills to the required extent and make good to the original condition after fixing and also as directed.All the aluminium sections are to be anodised with matt finish under electrically controlled conditions in accordance with IS 1868/1962 for an avereage abiduc film thickness of 15 microns, lift, transport,complete etc. complete.

Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish of single leaf door with half panelled with 12mm thick MDF both side laminated with one side melamine finish board of exterior grade at bottom and half glazed using 5.50mm thick sun cool glass at top with automatic door closure B3538and Shutter frame made of section Vertical & Top rail: 50x44.45x2.50mm @ 1.292 kg/m ,Bottom rail: 100 x44.45 x 2.50mm@ 1.974 kg/m, Lock rail : 50x44.45x2.5mm @ 1.292 kg/m, Alu Clips: 17.15x17.27x1.50mm @ 0.176 kg/m,Alu. Handle: 100x30mm @ 0.988 Kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - 1 No., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 1No ., lock-1No., Door stopper with rubber bush including cost of materials labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beams, masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc., complete. All the Alu. Section are to be anodised with matt finish under electricaly controlled conditions in accordance with IS 1868/1962 for an average anatic film thickness of 15 microns etc., complete.Aluminium sections,and furniture fittings shall be got approved by the Engineer incharge. For Door and Aluminum Ventilator

Providing RCC 1:1.5:3 mix using 20mm hard granite crusher blue metal for foundation including cost of all materials labour, lead, lift, etc., complete.

Supplying fabricating fixing in position of MS/RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, binding wire, labour, lead, lift etc., complete.

Providing Brick work in CM 1:5 using II class ground moulded chamber bricks including cost of all materials, labour, lead, lift etc., complete.

Flooring with approved stain free nano polish vitrified tiles 600mm x 600mm x 8mm of approved quality, design & colour laid in cement mortar 1:3 - 20mm thick including pointing with same colour cement using 0.4 Kg/Sqm finishing the joints , and removal of existing vinyl flooring including cost of all materials, labour, lead, lift etc., complete.

Supply and fixing of solid PVC door with frame made out of rigid thermo vinyl polymer extruded section ofsize 62mmx51mm with 2mm wall thickness,shall be reinforced with special polymeric rods of size 255mmx30mmx25mm and with EPDM gaskets along the frame. The door shutter frame of 40mm thickmade out of one piece moulded rigid thermo vinyl polymer extruded sectionof size 25mmx40mm with 2mm wall thickness is mitered and joinedat corners by stainless steel/ aluminium screws. The infill of the door shutterconsists of a seamless one piece multichamber hollow rigid thermo vinyl polymer sectionof size 762mmx35mm with 1mm wall thickness and with prelaminated glossy finish on either side of door shutter of suitable size including cost of all materials lead lift etc., complete.

Dadooing with glazed tiles of best approved quality of make johnson, neycer etc., over CM 1:3, 12mm thick including cost of all materials, labour, lead, lift, etc., complete. (300mmx450mmx8mm )

Flooring with approved anti skid self designed color ceramic tiles over CM 1:3 - 12mm thick including pointing with white cement finishing the joints, flush pointing the surfaces etc., complete.

Providing false ceiling by using 10.0mm thick perforated gypsum board in panels using 6mmGI rod suspender, GI coated "T" , "L" and removal existing false Ceiling including all materials, labour, lead and lift etc., complete.

Painting the ceiling and walls with two coats of plastic Emulsion paint over a one coat of primer of approved colour and quality, and removal of existing old wall papers including cost of all materials, lead and lift etc., complete

Plastering 1:5, 12 mm thick on existing damaged portion in Wall and Ceilling including the cost of all material, scaffolding charges, cement, labour charges, all leads, lifts, as per standard specification.

Providing and fixing sanitary fitting consisting of European Water Closet with “P” or “S” Trap with DoubleFlapped Seat and Seat Cover with Brass Hinges and 10 litre capacity PVC Low Level Flusing Tank with all internal fittings fixing with all internal fittings, and giving connection to sewer line, dismantling of existing damaged Indian type white closet , Cleaning Manhole , Removing old sanitary pipe lines and cleaning the debris away from the sie, including cost of all materials, lead, lift, etc.,complete

Supplying ,laying and fixing in position of PVC Superthick 32mm dia pipe of best quality from approved manufacturer confirming to IS 4985-1968, 4984-1970 including cutting threading joining with necessary PVC specials and PVC tap including cost of all materials lead lift labour etc complete. as directed by department Engineer at site

Supplying, fixing and laying of 110 mm dia PVC pipe 6 Kg/cm2 of ISI brand for sanitary arrangements including cost of all materials labour lead,lift etc complete.

Supplying and fixing of 18 watts 3000K Round Type Recessed Fitting (Higher End) with LED lamp fitting complete with suspension pipe from the ceiling or wall with PVC unsheathed leads from the terminals to the fitting with LED Lamp LED indoor fitting (Light Emitting Diode) including cost of wiring from the ceiling point, all labour lead lift etc., complete.

Supplying and fixing of LED tube light light along with fittings, wiring , including cost of all material, labour, lead, lift, etc, complete.

Supplying and fixing of 300 mm Sweep, 1325 RPM, 90 watts wall mounted AC fan with Metalic body with rope type control. Labour, Lead, lift etc., complete.

Supply and fixing of PVC Screw down tap heavy type 20mm dia and PVC 25 MM Ball Valeincluding cost of all the materials, labour, lead, lift, etc., complete.