Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.6 LAccepted-AOC 122 SAMHARIYA ASOPUR TANDA AMBEDKAR NAGAR UTTAR PRADESH 224190 | AMBEDKAR NAGAR | UTTAR PRADESH | 224190 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹31.3 L+₹5.7 L (22.5%)Rejected-AOC PLOT NO 39 SHRI SHIVE NAGAR 05 MOTI BANDHA MACHEDA HARMADA JAIPUR 302013 RAJ | JAIPUR | JAIPUR | RAJASTHAN | 302013 | L2 | Rejected-AOC Other than Lowest Bidder |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
3 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (S) Jaipur
Garrison Engineer (South) Jaipur Military Engineer Services Kalyan Marg, Jaipur302006
PROVN OF GUARD ROOM WITH BATHROOM AT MT BLDG NO P-479 OF GRND AND CONST OF 01 X ATT TOILET AND BATHROOM AT BLDG NO P-452 OF JAK AT JAIPUR MIL STN UNDER GE (S) JAIPUR
2022_MES_557157_2
GE (S)/J-42P /2022-23 8761/E8
Open Tender
Civil Works
Item Rate
240 days
Jaipur
Class E and category a(i)
9 documents required · 9 mandatory
₹500
GE (South) Jaipur
₹50,000
Yes
16 Dec 2022
15 Nov 2022
5 Dec 2022
15 Nov 2022
3 Dec 2022
21 Nov 2022
Amount
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft / Loose soil as specified. 01/LBW/61SA/2022-23/Q3W: 152 07/MIN/61SA/2022-23/Q3W: 30
Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & n exc 1.5m in depth & getting out in soft/loose soil as specified. E/M: 62 01/LBW/61SA/2022-23/Q3W: 56 07/MIN/61SA/2022-23/Q3W: 48
Labour only for Filling under floors including spreading,watering and levelling in layers n exc. 25 cm thick complete. Note: Soil obtained from surface excavation/ excavation shall be reused under this item as material and only labour will be paid in this item 01/LBW/61SA/2022-23/Q3W: 35 07/MIN/61SA/2022-23/Q3W: 10
M&L PCC in foundations, filling and mass-concrete type D2(1:4:8)using 40 mm graded stone aggregate complete. 01/LBW/61SA/2022-23/Q3W: 9 07/MIN/61SA/2022-23/Q3W: 3.5
M&L PCC 75mm thick in sub-floor type D-2 (1:4:8) using 40 mm graded stone aggregate for floor. 01/LBW/61SA/2022-23/Q3W: 327.5 07/MIN/61SA/2022-23/Q3W: 38
M&L PCC 25mm thick in sub-base type B-1 (1:2:4) using 20 mm graded stone aggregate for floor complete. 01/LBW/61SA/2022-23/Q3W: 77.5
M&L Preconstruction ATT treatment with treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete as specified. 01/LBW/61SA/2022-23/Q3W: 37
M&L Preconstruction ATT treatment with treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface area complete as specified. 01/LBW/61SA/2022-23/Q3W: 77.5
M&L Brick work with subclass 'B' bricks (old size), straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified 01/LBW/61SA/2022-23/Q3W: 94 07/MIN/61SA/2022-23/Q3W: 13
M&L Brickwork with subclass‘B’ (old size) bricks, straight or curved on plan to any radius in half brick thick walls built in CM ( 1:4), complete all as specified 01/LBW/61SA/2022-23/Q3W: 9 07/MIN/61SA/2022-23/Q3W: 5
M&L RCC in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed type B1 (1:2:4) using 20 mm graded aggregate. Note :- Reinforcement & formwork shall be measured separately. 01/LBW/61SA/2022-23/Q3W: 4.6
M&L Formwork (flat) to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; verticle or to batter rough finished surface of concrete. 01/LBW/61SA/2022-23/Q3W: 59
M&L for RCC M-25 design mix (20mm gradeded aggregate) in Foundations, footings, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete 01/LBW/61SA/2022-23/Q3W: 13
M&L Formwork to sides of pillar, posts, struds, piers etc for rough finished surface of concrete complete all as specified. 01/LBW/61SA/2022-23/Q3W: 61
M&L RCC M-25 design mix using 20 mm graded aggregates as in Columns, pillars, piers, posts and struts complete as specified. 01/LBW/61SA/2022-23/Q3W: 5
M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; verticle or to batter complete as specified. 01/LBW/61SA/2022-23/Q3W: 64
M&L RCC M-25 design mix using 20 mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete as specified. 01/LBW/61SA/2022-23/Q3W: 6
M&L Formwork to chullah hoods, cha jjas, troughs and similar items including edge for rough finished surface of concrete complete all as specified. 01/LBW/61SA/2022-23/Q3W: 5.25 07/MIN/61SA/2022-23/Q3W: 2
M&L RCC M-25 design mix using 20 mm graded aggregates as in Chajja, facia etc. complete as specified. 01/LBW/61SA/2022-23/Q3W: 0.5 07/MIN/61SA/2022-23/Q3W: 0.5
M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200m thick (Horizontal or sloping) Fair finished surfaces of concrete flat 01/LBW/61SA/2022-23/Q3W: 110 07/MIN/61SA/2022-23/Q3W: 45
M&L RCC M-25 design mix using 20 mm graded aggregate in Slabs supported on walls, beams & columns in floors, roofs, landings, balconies, canopies, deck slabs & in shelves and the like complete as specified. 01/LBW/61SA/2022-23/Q3W: 25 07/MIN/61SA/2022-23/Q3W: 4.6
M&L Mild steel TMT bars 10mm dia FE-500D and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified 01/LBW/61SA/2022-23/Q3W: 2200 07/MIN/61SA/2022-23/Q3W: 100
All as per item No. 22 above but mild steel bars TMT 6mm to 8 mm dia FE-500D complete all as specified. 01/LBW/61SA/2022-23/Q3W: 1825 07/MIN/61SA/2022-23/Q3W: 250
All as per item No. 22 above but 5mm dia and over upto and including 10mm dia mild steel bars TMT FE-500D in stirrups, spacers and binders 01/LBW/61SA/2022-23/Q3W: 700 07/MIN/61SA/2022-23/Q3W: 20
S&F IInd class HW (Sal/hollock) 35mm thick Factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkatsall as specified. 01/LBW/61SA/2022-23/Q3W: 12
M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even and fair without using extra cement complete as specified. 01/LBW/61SA/2022-23/Q3W: 180 07/MIN/61SA/2022-23/Q3W: 25
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor & roofs n exc 20 cm wide & sides of RCC/PCC bands in walls, horizintal or sloping & similar work exc 10cm but n exc 20cm wide Roughed finished surface of concrete complete as specified. 01/LBW/61SA/2022-23/Q3W: 70 07/MIN/61SA/2022-23/Q3W: 25
M&L Rendering 15mm thick surfaces or surface other than fair face of brickwork in CM (1:4) finished even and fair without using extra cement complete as specified. 01/LBW/61SA/2022-23/Q3W: 209 07/MIN/61SA/2022-23/Q3W: 100
M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling finished even and fair without using extra cement complete as specified. 01/LBW/61SA/2022-23/Q3W: 110 07/MIN/61SA/2022-23/Q3W: 30
Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil complete as specified. E/M: 42 01/LBW/61SA/2022-23/Q3W: 25.5 07/MIN/61SA/2022-23/Q3W: 28
Removing excavated soil n exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting point complete as specified. E/M: 20 01/LBW/61SA/2022-23/Q3W: 50.5 07/MIN/61SA/2022-23/Q3W: 10
M&L Coloured Non Skid ceramic tiles 7 to 8mm thick joint free (squares/rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) complete as specified. 01/LBW/61SA/2022-23/Q3W: 100 07/MIN/61SA/2022-23/Q3W: 30
M&L for coloured Glazed ceramic tiles in vertical surfaces 300x450mmx7mm thick joint free set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick plaster in CM 1:4 complete as specified. 01/LBW/61SA/2022-23/Q3W: 80 07/MIN/61SA/2022-23/Q3W: 60
M&L applying two coats of cement base paint, white or tinted on new plasterted wall surface including preparation of surface. 01/LBW/61SA/2022-23/Q3W: 200
M&L applying three coats of white wash on new plastered Ceiling surface including preparation of surface complete as specified. 01/LBW/61SA/2022-23/Q3W: 110
M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper on walls complete all as specified and directed. 01/LBW/61SA/2022-23/Q3W: 180
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290.Gde-E-165 complete as specified. 01/LBW/61SA/2022-23/Q3W: 100
M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing confirming Fe.290.Gde-E-165 complete as specified. 01/LBW/61SA/2022-23/Q3W: 80
M&L hold fast 25x3mm welded to angle iron door frame with nut & bolt / welded to frame conforming to Fe-290 Gde-E-165 complete as specified. 01/LBW/61SA/2022-23/Q3W: 12
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete as specified. 01/LBW/61SA/2022-23/Q3W: 15
All as per item No. 40 above but without glazing bars complete all as specified.
S&F Sheet glass 3.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane complete as specified. 01/LBW/61SA/2022-23/Q3W: 12
S&F Factory made Plain framed, panelled shutter 35mm thick (two panel)with lock rail & panel of 9mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both face. 2nd Class HW rail & style of size as per IS:1003 (Part I), kiln seasoned & chemically pressure treated 01/LBW/61SA/2022-23/Q3W: 10
S&F Mild steel barrel tower blots 150mm long, stove enamelled black, with bright bolt complete as specified. 01/LBW/61SA/2022-23/Q3W: 6
S&F Mild steel pressed handles 125mm size, oval type,stove enamelled black complete as specified. 01/LBW/61SA/2022-23/Q3W: 12
S&F Galvanised mild steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.18mm with tinned tacks, or galvanised wire staples complete as specified. 01/LBW/61SA/2022-23/Q3W: 15
M&L Machine cut kota stone slab 20-25mm thick over cement screed laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete incl 20mm thick screed bed in CM 1:4 complete as specified. 01/LBW/61SA/2022-23/Q3W: 6
M&L Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface over one coat of red oxide, zinc chrome 01/LBW/61SA/2022-23/Q3W: 30 07/MIN/61SA/2022-23/Q3W: 1
M&L Applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer 01/LBW/61SA/2022-23/Q3W: 15
M&L Hardcore of gauge n exc. 63 broken stone / boulder deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete as specified. 01/LBW/61SA/2022-23/Q3W: 3.7 07/MIN/61SA/2022-23/Q3W: 1
M&L plain cement concrete type C-1 1:3:6 (using 20mm graded stone aggregates) as in plinth protections 50 mm thick finished even and fair without using extra cement with joints 10 mm wide and in full depth at corners and @ 3. m c/c filled with mastic mortar complete all as specified. 01/LBW/61SA/2022-23/Q3W: 37 07/MIN/61SA/2022-23/Q3W: 15
M&L 40 mm thick Damp proof course to horizontal or vertical surfaces including necessary formwork in cement conc 1:2:4 type B-0 with Water Proofing Compound complete all as specified. 01/LBW/61SA/2022-23/Q3W: 12 07/MIN/61SA/2022-23/Q3W: 5
Supply only Integral waterproofing compound @3% by weight of cement. 01/LBW/61SA/2022-23/Q3W: 50
S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete 01/LBW/61SA/2022-23/Q3W: 11 07/MIN/61SA/2022-23/Q3W: 15
S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified. 01/LBW/61SA/2022-23/Q3W: 4 07/MIN/61SA/2022-23/Q3W: 5
S&F Mild steel, steel ventilators with top hung shutter including hinges,steel peg stay, complete 01/LBW/61SA/2022-23/Q3W: 2 07/MIN/61SA/2022-23/Q3W: 1
S&F 3mm thick Figured glass and glazing with oil putty in square not exc 0.5 sqm in each pane complete as specified. 01/LBW/61SA/2022-23/Q3W: 1.8
S&F aluminium, anodised, barrel tower bolts of extruded section and fixed 150 mm size complete as specified. 01/LBW/61SA/2022-23/Q3W: 4 07/MIN/61SA/2022-23/Q3W: 6
S&F Stainless steel Butt hinges 100mm size, medium weight, cold rolled mild steel complete as specified. 01/LBW/61SA/2022-23/Q3W: 24 07/MIN/61SA/2022-23/Q3W: 9
S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixedd nuts, four on bolt plate and two on staple plate and fixed complete as specified. 01/LBW/61SA/2022-23/Q3W: 3
S&F 150 mm extruded aluminium alloy handles, fabricated type., anodised complete as specified. 01/LBW/61SA/2022-23/Q3W: 4 07/MIN/61SA/2022-23/Q3W: 6
S&F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors,100mm bore sand cast pipe complete as specified. 01/LBW/61SA/2022-23/Q3W: 1 07/MIN/61SA/2022-23/Q3W: 4
S&F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors,75 mm bore sand cast pipe complete as specified. 01/LBW/61SA/2022-23/Q3W: 1 07/MIN/61SA/2022-23/Q3W: 4
S&F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints,fix to wall,100mm bore sand cast pipe complete as specified. 01/LBW/61SA/2022-23/Q3W: 3.5 07/MIN/61SA/2022-23/Q3W: 1.5
S&F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fix on wall,75 mm bore sand cast pipe complete as specified. 01/LBW/61SA/2022-23/Q3W: 1 07/MIN/61SA/2022-23/Q3W: 1.5
S&F CI Bend 100 mm dia without ovel access door complete as specified. 01/LBW/61SA/2022-23/Q3W: 1 07/MIN/61SA/2022-23/Q3W: 2
S&F Cast Iron vent cowl 75 mm dia complete as specified. 01/LBW/61SA/2022-23/Q3W: 1 07/MIN/61SA/2022-23/Q3W: 3
M&L Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) 75 mm dia complete as specified. 01/LBW/61SA/2022-23/Q3W: 2 07/MIN/61SA/2022-23/Q3W: 2
M&L Salt-glazed stoneware gully traps, square or round mouthed, type `P' ,100x100mm size fixed in PCC complete as specified. 01/LBW/61SA/2022-23/Q3W: 1 07/MIN/61SA/2022-23/Q3W: 1
S&F Stack clamps out of MS FI 50mm X 5mm flat iron and 16mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roof for 100 mm pipe complete as specified. 01/LBW/61SA/2022-23/Q3W: 2
M&L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite complete all as specied as in counter slab for fixing of WHB complete as specified. 01/LBW/61SA/2022-23/Q3W: 1
S&F Vitreous China wash basin, white, flat back, size 550x400mm but including coupling and waste pipe complete without brackets as fixed on counter slab (measured under item No. 70.00) 01/LBW/61SA/2022-23/Q3W: 1 07/MIN/61SA/2022-23/Q3W: 1
S & F Vitreous China squatting pan, `Orrisa' pattern, size 630x450 mm white, with integral foot rests and (excluding flushing cistern and flush pipe) complete including provision of cement concrete beding, jointing etc complete. 01/LBW/61SA/2022-23/Q3W: 1
S&F Tubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, 15mm bore complete as specified. 01/LBW/61SA/2022-23/Q3W: 16 07/MIN/61SA/2022-23/Q3W: 5
S&F Tubes, medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, 20mm bore complete as specified. 01/LBW/61SA/2022-23/Q3W: 8 07/MIN/61SA/2022-23/Q3W: 5
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 3 layer hoisted and fixed in position all as specified in SSR Part I - Capacity 1000 Litre complete as specified. 01/LBW/61SA/2022-23/Q3W: 1 07/MIN/61SA/2022-23/Q3W: 1
S&F 15 mm stop valves, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends fancy type chromium plated with long shank and cup (concealed type) complete as specified. 01/LBW/61SA/2022-23/Q3W: 1 07/MIN/61SA/2022-23/Q3W: 2
S&F 15 mm bore brass CP Angle stop cock fancy type concealled type long body complete as specified. 01/LBW/61SA/2022-23/Q3W: 2
S&F 15mm Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete as specified. 01/LBW/61SA/2022-23/Q3W: 1 07/MIN/61SA/2022-23/Q3W: 1
S&F 15mm bore Bib taps, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed, fancy type chromium plated long body complete 01/LBW/61SA/2022-23/Q3W: 3 07/MIN/61SA/2022-23/Q3W: 3
S&F 20mm bore stop valves, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete as specified. 01/LBW/61SA/2022-23/Q3W: 1 07/MIN/61SA/2022-23/Q3W: 1
S&F PVC valve less syphonic action type low level flushing cistern white color with inlet ball valve float and handle incl bracket 10 Lit capacity complete as specified. 01/LBW/61SA/2022-23/Q3W: 1 07/MIN/61SA/2022-23/Q3W: 1
S&F PVC connections 15mm size with PTMT nuts of length 300mm complete as specified. 01/LBW/61SA/2022-23/Q3W: 2 07/MIN/61SA/2022-23/Q3W: 2
S&F 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete as specified. 01/LBW/61SA/2022-23/Q3W: 1 07/MIN/61SA/2022-23/Q3W: 1
M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete 01/LBW/61SA/2022-23/Q3W: 20
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete as specified. 01/LBW/61SA/2022-23/Q3W: 100
S & F Framed work such as grills, gratings, etc., with ends of bar shoulder &/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks with Angle, MS sheet Flat iron & similar work conforming to Fe 290 GDE -E-165 (sheds ,door frames and cooler stands etc) complete as specified. 01/LBW/61SA/2022-23/Q3W: 450
M&L Water Proof Treatment to RCC Roof comprises the following, complete all as specified and as directed by Engr-in-Charge:- (a) Applying High build elastomeric waterproofing coating based on aliphatic polyurethane, cold applied of spray/brush applied, membrane with an elongation of 350% and crack bridging ability of 2mm as per ASTM D 412. The system including final base preparation, single coat of single component PU based primer and applying Berger HS Elastoseal or equivalent brand of other manufacture in two coats to achieve a min thickness 1.2mm, incl screed bed in bedding layer of mortar 15mm thick in CM 1:3 etc complete as per manufacture specification and carried out through authorised applicator of manufacturers. (b) Necessary guarantee for 5 years shall be submitted by the contractor. Make: Sika/ Asian Paints (Except smart care damp proof)/ IWL/ Berger Paints/ TikiDAN equivalent makes 01/LBW/61SA/2022-23/Q3W: 125
M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern complete all as specified 01/LBW/61SA/2022-23/Q3W: 250 07/MIN/61SA/2022-23/Q3W: 12
M&L Providing and laying at or near ground level pre cast factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature , jointed with cement mortar 1:3 (1 cement:3coarse sand), including making joints with or without grooves (thickness of joint except at sharp curve shall mot to more than 5mm ) including making drainage opening wherever required complete. 01/LBW/61SA/2022-23/Q3W: 8 07/MIN/61SA/2022-23/Q3W: 0.5
M&L Plain cement concrete 1:4:8 type D2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore complete as specified. 01/LBW/61SA/2022-23/Q3W: 40 07/MIN/61SA/2022-23/Q3W: 20
M&L for RCC (NP2) Drain pipe 150mm internal dia laid in trenches on concrete bed and jointed, complete all as specified. (excavation, earth work and concrete bed and haunching shall be measured and paid for separately) 01/LBW/61SA/2022-23/Q3W: 40 07/MIN/61SA/2022-23/Q3W: 20
M&L for PCC 1:2:4 type B-1 (20mm graded stone aggregate) as in surface channels and drains all as specified 01/LBW/61SA/2022-23/Q3W: 0.27
Extra for forming fair finished drain or channel of manholes inner girth not exceeding 30cm in cement concrete using extra cement including forms, mould mitered stopped ends etc all as specified. 01/LBW/61SA/2022-23/Q3W: 2
M&L for precast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate for manhole cover including placing & set in CM 1:6 all as specified Note :- Reinforcement shall be measured and paid for separately. 01/LBW/61SA/2022-23/Q3W: 0.4
M&L Construction of brick masonry soakage wells of size 1.80 metre dia and 3.0 metre deep (50 users) including excavation in soft/loose soil complete all as specified and shown on drawing (Drg No CEJZ/2004/S-35, Sheet No 1/1). 01/LBW/61SA/2022-23/Q3W: 1
M&L RCC in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed type B1 (1:2:4) using 20 mm graded aggregate complete as specified. 07/MIN/61SA/2022-23/Q3W: 0.8
M&L preparation new plaster of surface and applying three coats of white wash on wall complete 07/MIN/61SA/2022-23/Q3W: 25
S&F CI bend 75mm dia 07/MIN/61SA/2022-23/Q3W: 2
S&F CI 'T' junction 100mm dia single 07/MIN/61SA/2022-23/Q3W: 2
S&F CI 'T' junction 75mm dia single 07/MIN/61SA/2022-23/Q3W: 2
S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but incl seat & seat cover white closed recessed complete all as specified. 07/MIN/61SA/2022-23/Q3W: 1
S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including PVC Pipe (excluding flushing cistern, flush pipe and waste pipe) complete all specified 07/MIN/61SA/2022-23/Q3W: 1
Cutting into existing manholes for connecting new drains, making goodto pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150mm bore pipes. 07/MIN/61SA/2022-23/Q3W: 2
S&F Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws , complete all as specified 07/MIN/61SA/2022-23/Q3W: 1
S&F bathroom Glass corner of best quality (as per sample available at AGE B/R office), complete all as specified 07/MIN/61SA/2022-23/Q3W: 2
M&L for providing circular , raised platform of height 20cm below the tank and base 15cm more than the external dia of tank of PVC cylindrical water tank of capacity 1000 liters using PCC 1:3:6 type C-1 using 20mm graged stone aggregate with fair finish. 07/MIN/61SA/2022-23/Q3W: 1
S&F Soap dish brass CP , complete all as specified 07/MIN/61SA/2022-23/Q3W: 1
S&F of CP Pressure JET for EWC including flixible pipe for dia 15mm bore 07/MIN/61SA/2022-23/Q3W: 1
M&L Towel ring of brass C P Square flange , complete all as specified 07/MIN/61SA/2022-23/Q3W: 1
M&L Chromium plated Overhead Rain shower with relvoling joint and 225 mm long shower arm with wall flange 15mm bore fancy type with arm (Make- Parryware CAT PART No T9814A1 Airmix Shower Head or equivalent), complete all as specified 07/MIN/61SA/2022-23/Q3W: 1
M&L Point wiring complete with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and unsheathed cable drawn through in and incl concealed rigid PVC conduit 20 mm dia medium grade with all accessories ISI marked, including MS sunken box for mounting fitting like switches, sockets fan regulators modulor type etc. including 1.5 sqmm single core PVC insulated but unsheathed copper earth continuty conductor to common earth and connected FRLS cable 1100 V grade as continuous earth wire to earth dolly for followings, complete all as specified and as directed by Engr-in-Charge.
One light/fan/ bell point controlled by one, one way switch. 01/LBW/61SA/2022-23/Q3W: 28 07/MIN/61SA/2022-23/Q3W: 10
One 3 pin 5 Amp socket outlet on same board with other switches., 01/LBW/61SA/2022-23/Q3W: 4 07/MIN/61SA/2022-23/Q3W: 2
One 3 pin 5 Amp socket outlet on independent board with other switches., 01/LBW/61SA/2022-23/Q3W: 6 07/MIN/61SA/2022-23/Q3W: 2
All as per item No 113 above but Point wiring with 2.5 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 2.5 Sqmm copper cable continuous earth wire and connecting to common earth dolly , complete all as specified and as directed by Engr-in-Charge. 01/LBW/61SA/2022-23/Q3W: 4
All as per item No 113 above but Point wiring with 4 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 4 Sqmm copper cable continuous earth wire and connecting to common earth dolly, complete all as specified and as directed by Engr-in-Charge. 01/LBW/61SA/2022-23/Q3W: 1 07/MIN/61SA/2022-23/Q3W: 2
S&F switch piano type 230/ 250 V of following types , complete all as specified and as directed by Engr-in-Charge.
Single pole, one way 5 Amp rating 01/LBW/61SA/2022-23/Q3W: 32 07/MIN/61SA/2022-23/Q3W: 14
Single pole, one way 15 Amp rating 01/LBW/61SA/2022-23/Q3W: 4 07/MIN/61SA/2022-23/Q3W: 2
S&F Socket, piano type 230/250 volts of following type, complete all as specified
Socket 3 Pin, 2 in 1, 05 Amp rating 01/LBW/61SA/2022-23/Q3W: 4 07/MIN/61SA/2022-23/Q3W: 4
Socket 3 Pin , 2 in 1, 5 &15 Amp rating 01/LBW/61SA/2022-23/Q3W: 4 07/MIN/61SA/2022-23/Q3W: 2
S & F stepped type electronics fan regulator flush type AC 230 volts single pole (ISI marked) for AC 230V, 50 Hz on laminated sheet complete all as specified 01/LBW/61SA/2022-23/Q3W: 4
S&F Ceiling rose surface bakelite, 3 Phase/ PVC/ Polycarbonate isolated body (ISI marked) complete all as specified 01/LBW/61SA/2022-23/Q3W: 10 07/MIN/61SA/2022-23/Q3W: 7
Supply & fix lamp holder PVC body complete all as specified and directed with 01xLED bulb 9 watt , complete all as specified 01/LBW/61SA/2022-23/Q3W: 4 07/MIN/61SA/2022-23/Q3W: 2
Supply & fix Exhaust fan steel body AC single phase 230 V of size 300mm sweep heavy duty with blades and frame and louvers all as specified and directed, complete all as specified 01/LBW/61SA/2022-23/Q3W: 2 07/MIN/61SA/2022-23/Q3W: 1
Supply & fix LED retrofit lamp ( size-4 feet), Regal Batten for LED tube, universal batten for T5 lamps surface/wall mounting IP 20 with twin core twisted flexible copper conductor cable with suitable size. Make - Havells cat No - REGALBATTENT5UPTO1X18WDSBSWH Or equivalent, complete all as specified 01/LBW/61SA/2022-23/Q3W: 12 07/MIN/61SA/2022-23/Q3W: 1
Supply & fixing Mirror surface mounted LED fitting 14 W (2 Feet)provided with a high output PMMA diffuser for glare free light , IP 20 with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make - Crompton cat pt No- LCL-14-CDL or equivalent , complete all as specified 01/LBW/61SA/2022-23/Q3W: 2 07/MIN/61SA/2022-23/Q3W: 1
S&F Energy efficient LED security lights of 45 Wattage of IP 66 with PDC Aluminium body and clear glass and tough die cover for unifrom light spread LED technology of Britelite complete all as specified and as directed by Engr-in-Charge.. (Note:- Bracket, GI tubing of suitable size along with screw/ washer etc to fix on wall/surface duly painted by silver colour paint will be included in above quoted rate.) Make - Crompton Cat Part No. LSTS-40-CDL M or Equivalent 01/LBW/61SA/2022-23/Q3W: 4
S&F Ceiling fan size 1400mm sweep, 5 Star rating, 3 blades, white color, single phase AC, 230 Volts complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. 01/LBW/61SA/2022-23/Q3W: 4
S&F factory made sheet distribution board SP&N 12 ways double door protection class IP-42 double door type suitable for mounting MCB/MCCB conforming to IS 13032 IS- 8623 and BS 5484 with minimum 200 Amps bus bar of under mentioned ratings complete all as specified and as directed by Engr-in-Charge. 01/LBW/61SA/2022-23/Q3W: 1
S&F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning, confirming to IS-8828, IEC-898, rupturing capacity of the under mentioned type and rating complete all as specefied
SP 5 upto 32 AMP 01/LBW/61SA/2022-23/Q3W: 10 07/MIN/61SA/2022-23/Q3W: 6
SPN above 32 to 63 AMP 01/LBW/61SA/2022-23/Q3W: 1 07/MIN/61SA/2022-23/Q3W: 1
M & L supplying, laying, connecting and testing in trenches, under floors/ roads or on walls 10 sqmm, 2 core Cable XLPE insulated screened PVC bedded galvanized steel strips or wire armored, electric power cables (heavy duty) ISI marked with stranded aluminium conductor, 1100 volts grade complete all as specefied and as directed by Engineer-in-Charge. Note : Excavation and earth work shall be measured and paid under specific item of schedule. 01/LBW/61SA/2022-23/Q3W: 160
S&F electric water heater (geyser) storage type stainless steel body with copper inner tank and heating element upto 2 KW capacity 25 litre BEE 5 star rate complete with all accessories such as safety valve thrmostate NRV connection pipe etc., complete all as specified 01/LBW/61SA/2022-23/Q3W: 1 07/MIN/61SA/2022-23/Q3W: 1
M & L Sand cushioning to PVC under ground cable with screened and washed river sand and gently punning to provide a required cover complete all as specified. Note: Only punned depth shall be measured and paid 01/LBW/61SA/2022-23/Q3W: 17
M&L Old size bricks for protection cover to under ground cable (with sub class `B` bricks with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent brick not exceeding 10 mm complete all as specified 01/LBW/61SA/2022-23/Q3W: 0.8
M&L Earthing complete as per electrical plate No. 3 of MES SSR Part-I with galvanised steel earth plate electrode 60cmx60cmx6.3 mm thick, buried directly vertically in ground in a pit depth not less than 2.5 metres below ground level with top edge of earth plate at a depth not less then 1.8 metre below normal ground level connected to and including galvanised iron or steel earth wire 4 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel. Earthing wire shall be protected by galvanised iron or steel pipe 15 mm bore medium grade and connected to continuous earth wire on pole / test point to main board. Watering pipe shall be 20 mm bore GI medium grade. The earthing shall be of inclusive of excavation & earth work in any type of soil, charcoal, salt, funnel PCC pit and RCC cover, complete all as specified and as directed by Engr-in-Charge. Note-: Following items deemed to be included in quoted rate (a) Earth Electrode (b) Main earthing lead from earth electrode to test point and further to equipment to be earthed upto 7.5 metre (c) M&L for connecting earth electrode and earthing lead as specified (d) Adequate quantity of charcol dust and common salt as directed (e) All labour involved including testing of earth net work (f) Excavation and earth work or drilling hole for electrode (g) P.C.C pit and C.I cover (h) Funnel and watering pipe, wire mesh and copper lugs etc. as specified (j) G.I protection pipe of size ordered specified for protection of earthing lead from mechanical injury or tempering. (k) connected lead from test point to main switch or switch board or equipment to be earthed 01/LBW/61SA/2022-23/Q3W: 1 07/MIN/61SA/2022-23/Q3W: 1
Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps 240 volt, complete all as specified 01/LBW/61SA/2022-23/Q3W: 1 07/MIN/61SA/2022-23/Q3W: 1
S&F factory made sheet distribution board SP&N 8 ways double door protection class IP-42 double door type suitable for mounting MCB/MCCB conforming to IS 13032 IS- 8623 and BS 5484 with minimum 200 Amps bus bar of under mentioned ratings complete all as specified and as directed by Engr-in-Charge. 07/MIN/61SA/2022-23/Q3W: 1
M & L Sub main wiring complete with 2 runs of 6 Sqmm single core PVC insulated unsheathed cable 1100 V grade with multistranded copper conductor ISI marked drawn through and including PVC rigid conduit and conduit accessories fixed on surface/wall celing etc including provision of 1 run of 4 Sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity, complete all as specified and as directed. Note: Two run of cable 6 Sqmm and one run of 4 Sqmm plus one run of rigid PVC conduit shall be measured as one running meter unit. 07/MIN/61SA/2022-23/Q3W: 75
S&F surface mounted LED picture light fitting 7W LED white, flexible neck for adjusting beam bronze finish for superior feel long life LED light source, energy saving, lower power consumption with suitable for bathroom, bedroom, pre-wired twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed. Make - Philips Cat Part No. 31402 or Equivalent of other make as per Appx 'B' 07/MIN/61SA/2022-23/Q3W: 2
JAGDAMBA CONSTRUCTION COMPANY
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .