Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.8 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | Rejected-Technical | - | Rejected-Technical L3 | |
| 3 | Rejected-Technical | - | Rejected-Technical L4 | |
| 4 | Rejected-Technical | - | Rejected-Technical L2 |
| Sl No | Description | Qty | Unit | K L ENGINEERS L4 | LGR TRADE & ENGINEERING SERVICES L2 | WELDMAKE ENGINEERING L1 | APPLE TECH ROS L3 |
|---|---|---|---|---|---|---|---|
| 1.00 | Atmospheric Ammonia Open Coil Condenser – Pipeline and Fittings:-
Replacement of the damaged 4" header section, delivery pipeline and associated 3" pipeline, including fabrication, fixing and welding works for the ammonia atmospheric condenser coil.
The required materials include:
• 4" GI Pipe – 3 meters.
• 3" GI Pipe – 2 meters.
• 2" GI Pipe – 1 meters.
• 3" Strainer – 1 No.
• 3" Butterfly Valve – 3 Nos.
• 2" Butterfly Valve – 2 Nos.
• 3" MS Flange – 10 Nos.
• 2" MS Flange – 8 Nos.
• 4" MS Round Plate – 4 Nos.
• Rubber Gasket – 10 Nos. | 1 | JOB | 1,10,000 ₹1,29,800 | 1,08,100 ₹1,27,558 | 1,07,100 ₹1,26,378 Lowest | 1,08,908 ₹1,28,511.44 |
| 2.00 | Condenser Water Circulation Pump:
Supply and installation of CRI/Texmo Make 5 HP Mono block Pump Sets – 2 Nos with 100amps main switch, 25 amps 3 pole MCB-2nos, followed by 16amps starter (including 4sqmm copper 3C armored/Flexible Cable- 40 meters for wiring) for proper circulation of water through the condenser system. | 1 | JOB | 58,500 ₹69,030 | 57,335 ₹67,655.3 | 56,735 ₹66,947.3 Lowest | 59,600 ₹70,328 |
| 3.00 | Condenser Motor Bed:-
The existing damaged MS angle motor bed shall be cut and removed. A new MS channel frame shall be fabricated, fixed and welded with suitable base plates and anchor bolts.The required materials include:
• 100 × 50 mm MS Channel – 8 meters.
• 300 × 300 mm MS Plate – 6 Nos.
• 16 × 100 mm Anchor Bolts – 10 Nos. | 1 | JOB | 27,000 ₹31,860 | 25,500 ₹30,090 | 24,800 ₹29,264 Lowest | 25,000 ₹29,500 |
| 4.00 | Ammonia Compressor Head Cooling and Discharge Pipeline:-
Replacement/provision of the ammonia compressor head cooling pipeline and discharge pipeline, including necessary fittings, fabrication, fixing and welding works.
The required materials include:
• 2" GI Pipe, 'C' Class – 12 meters
• 1" GI Pipe, 'C' Class – 42 meters
• 1" MS Flange – 36 Nos.
• 2" Thread Type GI Dummy – 2 Nos.
• 1" Thread Type MS Elbow – 11 Nos.
• 1" Thread Type Tee – 3 Nos.
• 1" Thread Pipe Nipple – 18 Nos.
• 1" SS Ball Valve – 5 Nos.
• 2" × 1" Reducer – 2 Nos.
• GI Bolts & Nuts – 76 Nos.
• Rubber Gasket – 18 Nos. | 1 | JOB | 1,15,500 ₹1,36,290 | 1,13,180 ₹1,33,552.4 | 1,12,280 ₹1,32,490.4 Lowest | 1,13,000 ₹1,33,340 |
| 5.00 | Ammonia Compressor Tank Water Top-up Pipeline:-
Provision of a new ammonia compressor tank water top-up pipeline, including necessary supports, fabrication, fixing and welding works.
The required materials include:
• 1" GI Pipe – 30 meters
• 1" GI Bend – 6 Nos.
• 1" MS Flange – 6 Nos.
• 1" SS Ball Valve – 2 Nos.
• 1" GI Pipe Nipple – 2 Nos.
• 40 × 40 mm MS Angle – 6 meters
• MS Hole Plate – 5 Nos.
• Anchor Bolts – 15 Nos.
• 2" MS Round Plate – 2 Nos. | 1 | JOB | 48,000 ₹56,640 | 46,550 ₹54,929 | 45,550 ₹53,749 Lowest | 47,000 ₹55,460 |
| 6.00 | Electrical Panel:-
Supply and installation of FN 250 TPN, 440 VAC, 50/60 Hz DIN Electrical Panel Box – 1 No. | 1 | JOB | 12,500 ₹14,750 | 11,000 ₹12,980 | 10,400 ₹12,272 Lowest | 10,500 ₹12,390 |
| 7.00 | Milk Storage Tank Ladder:-
The existing damaged 1¼" pipe ladder of the milk storage tank shall be cut and removed. A new ladder shall be fabricated using suitable 1¼" GI pipe and long elbows, and fixed in position. | 1 | JOB | 13,000 ₹15,340 | 12,000 ₹14,160 | 11,600 ₹13,688 Lowest | 12,000 ₹14,160 |
| 8.00 | Pump Bed Area Roofing:-
Provision of roof covering over the pump bed area, including fabrication and fixing of the supporting MS frame and roofing sheets.
The required materials include:
• 40 × 40 mm MS Square Tube – 36 meters
• Roofing Sheet – 80 sq. ft.
• MS Plate – 6 Nos.
• Anchor Bolts – 12 Nos. | 1 | JOB | 37,000 ₹43,660 | 34,900 ₹41,182 | 34,500 ₹40,710 Lowest | 35,000 ₹41,300 |
| 9.00 | Painting Work:-
Cleaning of all Ms and GI pipe line with two coat painting and labour charges
Materials: Blue Paint – 5 liters, Red oxide -5 liters; Thinner-5 liters. | 1 | JOB | 14,000 ₹16,520 | 11,000 ₹12,980 | 10,500 ₹12,390 Lowest | 12,000 ₹14,160 |
Tender Value
Refer Docs
EMD Value
₹5,000
Closing Date
17 Sept 2026, 10:00 amClosed
The General Manager KTDCMPU LTD
GM KTDCMPULTD KAKKALUR INDUSTRIAL ESTATE TIRUVALLUR
Reconditioning of atmospheric Condenser Motor Base, Valves, pipe lines, and Support at Sanur Chilling Centre
2026_TCMPF_702690_1
2672/Engg/2026
Limited
Maintenance Works
Works
Sanur Chilling Centre Chengalpattu
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹5,000
Yes
26 Sept 2026
9 Sept 2026
17 Sept 2026
9 Sept 2026
17 Sept 2026
9 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | GST % |
|---|---|---|---|---|---|---|
| 1 | Atmospheric Ammonia Open Coil Condenser – Pipeline and Fittings:-
Replacement of the damaged 4" header section, delivery pipeline and associated 3" pipeline, including fabrication, fixing and welding works for the ammonia atmospheric condenser coil.
The required materials include:
• 4" GI Pipe – 3 meters.
• 3" GI Pipe – 2 meters.
• 2" GI Pipe – 1 meters.
• 3" Strainer – 1 No.
• 3" Butterfly Valve – 3 Nos.
• 2" Butterfly Valve – 2 Nos.
• 3" MS Flange – 10 Nos.
• 2" MS Flange – 8 Nos.
• 4" MS Round Plate – 4 Nos.
• Rubber Gasket – 10 Nos. | 1 | JOB | 65 | ₹65 | 18% |
| 2 | Condenser Water Circulation Pump:
Supply and installation of CRI/Texmo Make 5 HP Mono block Pump Sets – 2 Nos with 100amps main switch, 25 amps 3 pole MCB-2nos, followed by 16amps starter (including 4sqmm copper 3C armored/Flexible Cable- 40 meters for wiring) for proper circulation of water through the condenser system. | 1 | JOB | 65 | ₹65 | 18% |
| 3 | Condenser Motor Bed:-
The existing damaged MS angle motor bed shall be cut and removed. A new MS channel frame shall be fabricated, fixed and welded with suitable base plates and anchor bolts.The required materials include:
• 100 × 50 mm MS Channel – 8 meters.
• 300 × 300 mm MS Plate – 6 Nos.
• 16 × 100 mm Anchor Bolts – 10 Nos. | 1 | JOB | 65 | ₹65 | 18% |
| 4 | Ammonia Compressor Head Cooling and Discharge Pipeline:-
Replacement/provision of the ammonia compressor head cooling pipeline and discharge pipeline, including necessary fittings, fabrication, fixing and welding works.
The required materials include:
• 2" GI Pipe, 'C' Class – 12 meters
• 1" GI Pipe, 'C' Class – 42 meters
• 1" MS Flange – 36 Nos.
• 2" Thread Type GI Dummy – 2 Nos.
• 1" Thread Type MS Elbow – 11 Nos.
• 1" Thread Type Tee – 3 Nos.
• 1" Thread Pipe Nipple – 18 Nos.
• 1" SS Ball Valve – 5 Nos.
• 2" × 1" Reducer – 2 Nos.
• GI Bolts & Nuts – 76 Nos.
• Rubber Gasket – 18 Nos. | 1 | JOB | 65 | ₹65 | 18% |
| 5 | Ammonia Compressor Tank Water Top-up Pipeline:-
Provision of a new ammonia compressor tank water top-up pipeline, including necessary supports, fabrication, fixing and welding works.
The required materials include:
• 1" GI Pipe – 30 meters
• 1" GI Bend – 6 Nos.
• 1" MS Flange – 6 Nos.
• 1" SS Ball Valve – 2 Nos.
• 1" GI Pipe Nipple – 2 Nos.
• 40 × 40 mm MS Angle – 6 meters
• MS Hole Plate – 5 Nos.
• Anchor Bolts – 15 Nos.
• 2" MS Round Plate – 2 Nos. | 1 | JOB | 66 | ₹66 | 18% |
| 6 | Electrical Panel:-
Supply and installation of FN 250 TPN, 440 VAC, 50/60 Hz DIN Electrical Panel Box – 1 No. | 1 | JOB | 66 | ₹66 | 18% |
| 7 | Milk Storage Tank Ladder:-
The existing damaged 1¼" pipe ladder of the milk storage tank shall be cut and removed. A new ladder shall be fabricated using suitable 1¼" GI pipe and long elbows, and fixed in position. | 1 | JOB | 66 | ₹66 | 18% |
| 8 | Pump Bed Area Roofing:-
Provision of roof covering over the pump bed area, including fabrication and fixing of the supporting MS frame and roofing sheets.
The required materials include:
• 40 × 40 mm MS Square Tube – 36 meters
• Roofing Sheet – 80 sq. ft.
• MS Plate – 6 Nos.
• Anchor Bolts – 12 Nos. | 1 | JOB | 66 | ₹66 | 18% |
| 9 | Painting Work:-
Cleaning of all Ms and GI pipe line with two coat painting and labour charges
Materials: Blue Paint – 5 liters, Red oxide -5 liters; Thinner-5 liters. | 1 | JOB | 66 | ₹66 | 18% |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_844751.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.28 MB
BOQ_844751.xls
BOQ • 0.41 MB
TENDOC.pdf
Tender Documents • 0.43 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .