Supply and Laying of UG cable for GP and LLZ at Aurangabad Airport.

Amount

Supply of 3.5CX 240 sq.mm size of XLPE insulated & PVC sheathed, armoured, aluminium conductor under ground cable of 1.1KV grade as per IS 7098:1988 Part-I with upto date amendments complete as required.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 120 mm dia (OD-120 mm & ID-103 mm nominal)

63 mm dia (OD-63 mm & ID-51 mm nominal)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL/DWC-HDPE pipe as required. Above 185 sq. mm and upto 400 sq. mm

Upto 35 sq. mm

Above 35 sq. mm and upto 95 sq. mm

Supply & Laying of 100 mm dia size B class G.I pipe confirming to IS : 1239 part-1 (2004) for road crossing at a depth of 300mm i/c cutting bituminous surface, re-filling with cement concrete of 1:2:4 and making good the same as required.

Supply & Laying of 50 mm dia size B class G.I pipe confirming to IS : 1239 part-1 (2004) for road crossing at a depth of 300mm i/c cutting bituminous surface, re-filling with cement concrete of 1:2:4 and making good the same as required.

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for 3.5X240 sq.mm PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Supplying and making end termination with brass compression gland and aluminium/copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5 X 240 sq. mm (62 mm)

3½ X 70 sq. mm (38mm)

3½ X 50 sq. mm (35mm)

4 X 16 sq. mm (28mm)

Supply of 4C X 16 sq.mm size of XLPE insulated & PVC sheathed, armoured, aluminium conductor under ground cable of 1.1KV grade as per IS 7098:1988 Part-I with upto date amendments complete as required. (Make: As per AAI list of approved makes)

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

Design, Supply , Installation , Testing and commissioning of natural air cooled three phase voltage stabilizer of 30 KVA Capacity having input voltage range 340-480 volts and output voltage range : 415 +- 1%, Frequenct range : 47-53 Hz , Continuous duty cycle having all the metering to see input output voltage range with rate of correcton : 40V/seccomply with overload proction system and compatible to connect with existing LT Panel. Design should be approved from EIC before the supply.

Design, Supply, Installation, Testing & Commissioning of Outdoor Type, Floor Mounted compartmentalized cubical type Feeder Pillar of 415 Volt (Nominal), fabricated out of 2 mm thick CRCA Sheet, free standing and totally enclosed, IP65, Double Door Feeder pillar to cover incomers and outgoings confirming to IS: 61439, Weather proof / dust proof / vermin proof with bottom cable entries and cable alleys. The feeder pillar shall be suitable for operation on 3 Phase, 4 wire, 50 Hz AC supply and with suitable size busbar, earth bar and following switchgear instrumentation and protection devices etc. complete with connections, interconnection, earthing, painting and marking as per site conditions etc complete as required as per the specifications. Suuplier must take Feeder Pillar Design Approval from EIC before the supply. I: - Incomer : a) 160 A, MCCB, 4P, 35-37 KA (Icu= 100% Ics) with extended rotary handle and spreaders - 03 Nos. b) Multi function meter (Shows Voltage, Current & Frequency) with 3 line LCD/LED Display of size 96 x 96 mm. - 03 Nos. c) Indication Lamp R, Y & B (LED Type) -03 Set. II - Outgoing : a) 100 A, MCCB, 4P, 30 KA (Icu= 100% Ics) with extended rotary handle - 03 Nos. b) 64A, MCCB, 4P, 30 KA (Icu= 100% Ics) with extended rotary handle - 02 Nos. c) Indication Lamp R & G (LED type) - 05 Set. Other : a) 300A Copper busbar, 3 Phase and Neutral. b) Necessary CT & Control wiring arrangement. Design should be approved from EIC before the supply.

Supply, Installation, Testing and commissioning of Four Pole, 250 A, Automatic Transfer switch confirming to IS/IEC : 60947 -3 having Automatic and Manual mode with inbuilt time delay, compete electrical protection suitable for operation of 415 V, 3 phase, 50 Hz, AC Supply, totally enclosed in dust and vermin prooft indoor cubicle of MS (1.6mm thick) enclosure, complete with separate MS (2 mm thick) cable gland box having size suitable for glanding of three nos. armoured aluminium conductor cable of various sizes, connection & interconnections etc. as per requirement.

Krishsons International Engineers And Consultants (I) Pvt. Ltd

ABHISHEK INTEGRATIONS LIMITED

Messers Rajesh Gawde

Awasthi Electric Works

Mayur Electric Works

Shiva Enterprises

DOSHI ELECTRIC ENGG. CO.

Genesis

Manish Electricals

Surendra Infrastructure Pvt. Ltd.

jaydeep agency corporation

Yash Energy Pvt. Ltd

Ideas Electricals and Engineers Pvt Ltd