Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.2 LAccepted-AOC | L1 | Accepted-AOC Lowest Bid value. Hence Tender is accepted | |
| 2 | L2₹1.2 L+₹3,665.08 (3.03%)Rejected-AOC | L2 | Rejected-AOC Highest Bid value.Hence Tender is not accepted |
Tender Value
Refer Docs
EMD Value
₹1,300
Closing Date
27 Jan 2025, 3:00 pmClosed
Executive Engineer and Ado
Office of the Executive Engineer and Ado Thanjavur Housing unit Thanjavur
Annual Maintenance working estimate for 216 TNGRHS Flats at Pattukottai and 90(out of 260) TNGRHS Flats at Thiruvarur under Annual maintenance for the Year 2024-2025
2025_TNHB_518585_1
TNHB/TJHU/DB/1802/2024
Open Tender
Civil Works - Buildings
Item Rate
15 days
Pattukottai and Thiruvarur
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹1,300
29 Jan 2025
13 Jan 2025
27 Jan 2025
13 Jan 2025
27 Jan 2025
13 Jan 2025
Amount
SCleaning the Jungles around the blocks in 216 TNGRHS flats by engaging JCB
Supplying and Fixing 110mm dia PVC SWR rain water downfall pipe 'A' class pipe of approved quality with necessary CI gratings 110mm dia PVC plain bend, 110mm PVC shoe, offsets, MS special clamps (heavy) TW plugs and screws of approved quality etc. including fixing CI grating 100mm dia at the junction of parapet and floor or roof slab and jointing with rubber lubricant etc. complete
Pointing the pressed tile roof in CM 1 : 3 (One of cement and three of sand) for the full depth of tiles mixed with water proofing compound at 2% by weight of cement used and pointed neatly with the same cement mortar mixed with water proofing compound including curing etc.,complete in all respects complying with relevant standard specifications and as directed by the Departmental officers.
Supplying and Fixing the following dia PVC (SWR) Pipe Type 'B' class conforming to IS 13592 and relevant specials conforming to IS 14735, including packing the joints with rubber lubricant fixing them into walls with necessary GI clamps and GI bolts and nuts with special clamp made of MS angle / Flat including cutting, bending (excluding the cost of MS angle/Flat) holding, wherever necessary and making good of the dismantled portion with necessary connections to sanitary fittings etc. complete in all respects and as directed by the departmental officers.Below Ground Level
110mm dia PVC Pipe
75 mm dia PVC Pipe
Supplying, laying, fixing and joining the following PVC pipes as per ASTM D-1785 of Schedule 40 of Wall thickness not less than that specified in IS 4985 suitable for plumbing by threading of wall thickness including the cost of suitable PVC/GI specials /GM specials like elbow, tee, reducers, plug unions, bend, coupler, nipple, GM gate valve, check and wheel valve etc., wherever required above the ground level including the cost of fixing materials, special clamps, nails etc., fixing on wall to the proper gradiant and alignment and redoing the chipped off masonry etc., complete in all respects complying with relevant standard specifications and as directed by the departmental officers.25 mm Dia PVC Pipe Above Ground Level
32 mm dia ASTM Pipe
25 mm dia ASTM Pipe
Run off the 2 wires of 4sqmm copper PVC insulated single core cable with one run of 7/20GI stay wire suspended with porecelin reel insulators at 1.0m centre to centre for support of phase and neutral cable from top of street pole to the house / flats including all materials etc... all complete for EB service connections including labour charges for fixing GI wire and MS angles (For EB Service connection single phase)
Supplying and Fixing the following dia PVC (SWR) Pipe Type 'B' class conforming to IS 13592 and relevant specials conforming to IS 14735, including packing the joints with rubber lubricant fixing them into walls with necessary GI clamps and GI bolts and nuts with special clamp made of MS angle / Flat including cutting, bending (excluding the cost of MS angle/Flat) holding, wherever necessary and making good of the dismantled portion with necessary connections to sanitary fittings etc. complete in all respects and as directed by the departmental office
110 mm dia PVC SWR Pipe 'B' Type including all required PVC specials etc. all complete
Sub Total
GST at 18%
I ANBUCHEZHIAN CONTRACTOR (BID ID -1238286)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_617128.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .