PROVN OF CERTAIN B R REV AND MINOR WORK AT ATS SAMBRA BELGAVI

Amount

Demolition of cement concrete ( un reinforced ) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons laid bedded and pointed in any mortar etc, all as specified and directed.

Demolition of Brick work or stone masonry built in cement mortar, etc all as specified and directed.

Excavation in trenches n. exc. 1.50 mtr deep and n. exc. 1.50 m wide and getting out in hard/dense soil all as specified and directed.

Returning, filling in layers n. exc. 25 cm including spreading, levelling, watering and well ramming in hard/dense soil all as specified and directed.

Removing excavated material (soil) to a distance n. exc. 50 m and depositing where directed at a level n. exc. 50 m from starting point all as specified and directed.

Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Soft/ Loose soil all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out hard dense soil all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum getting out ,returning filling in and ramming earth or broken rubble mixed with earth around ,in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface, Hard/dense soil all as specified and directed.

Hardcore of gauge n exc. 63mm, deposited, spread andlevelled in layers n exc. 15cm thick, watered and rammed to a true surface all as specified and directed.

Material and labour for sand cushion as under floors of paver blocks/tiles compacted by using plate compactor or other suitable mechanical method etc, all as specified and directed.

Material and labour for PCC 1:2:4 type B1 using 20mm stone aggregates for embedding MS pipes all as specified and directed.

Material and labour for cement concrete type D2 1:4:8(40 mm graded aggregate) in foundations, filling and mass concrete all as specified and directed.

Material and labour for pre-cast cement concrete block masonry Type C1 1:3:6 (20mm)graded aggregate set in cement mortar 1:4 with solid blocks, exc. 10 cm in width and setting in mortar,complete all as specified and directed.

Material and labour for Pre-cast cement concrete block masonry type C11:3:6 (CM 1:6) with solid blocks, exc. 10 cm in width and setting in mortar, complete all as specified and directed.

Material and labour for cement concrete type B-1 1:2:4 (20 mm graded aggregate) as in coping including necessary form work. Exposed surface orf concrete shall be finished even and smooth without using extra cement all as specified and directed.

Material and labour for Precast RCC 1:2:4 mix, type B1 (using 20 mm graded stone aggregate) as in cover slabs, shelves, and similar articles with plain faces, set in cement mortar 1:6 all as specified and directed.

Material and labour for providing precast cement concrete B1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:4 in quoin blocks (for use with masonry),string courses, copings. kneelers, apex stones/Kerb stones with plain fair faces,including chamfers all as specified and directed.

Material and labour for cutting holes in brick walls/PCC block masory built in cement mortar exc ½ bricks but not exc one brick thick for inserting hold fasts and making good dismantled portion in CM (1:3) or cement concrete 1:2:4, type B-1 as required, depth of embeded portion of hold fasts measured from face of the jombs all as specified and directed.

Material and labour for brick work with subclass‘B’ bricks,straight or curved onplan exc 6m meanradius, built in Cement mortar 1:6 all as specified and directed.

Material and labour for forming jambs, etc. to openings (to foregoing item), including cutting,toothing and properly bonding into old work,also facing, jointing and pointing to match existing work, complete with cement mortar1:6 all as specified and directed.

Use & waste of form work to sides and soffits of suspended slabs of shelves including supports, overhangs, etc flat rough finished surface all as specified and directed.

Taking down wooden/PVC chowkets or frames with shutters (without taking off shutter from the frame ) not exc1.5 sqm each including making good disturbed portion to match with adjoining surfaces and offering credit as per schedule of credit all as specified and directed.

Supply and fix 125 mm long MS butt hinges medium weight cold rolled and fixed all as specified and directed.

Supply and fix butt hinges, heavy weight, cold rolled mild steel and length 125 mm all as specified and directed.

Supply and fix 200 mm long MS barrel tower bolts, stove enamelled black, with bright bolt and fixed all as specified and directed.

Supply and fix 125 mm long MS pressed handle, oval shape, stove enamelled black all as specified and directed.

Supply and fix 300 mm long MS sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 blots and two on staple plates and fixed including necessary welding etc complete all as specified and directed.

Supply and fix decorative fancy curtin rod 25 mm dia or similar fixied on wall surfaces all as specified and as directed.

Supply and fix decorative fancy curtin rod 25 mm brackets, brackets , stops , rollers etc all as specified and as directed. similar fixied on wall surfaces all as specified and as directed.

Supply and fix MS TMT bars 10 mm dia and over, cut to length, bent to shape as required and cranking, bending and binding with and including MS wire aneealed not less than 0.9 mm dia wire all as specified and directed.

Supply and fix steel work in tubular posts, purlins, rafters, medium weight including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St -240 all as specified and as directed.

Supply and fix roof trusses (Framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc all as specified and as directed.

Supply and fix cast iron or malleable cast iron, handl;e, cast type, stove enamelled black size 125 mm all as specified and as directed.

Supply and fix plain cold rolled (CR) sheet of thickness 16 gauge (1.60mm) in wall cladding, steel gates and similar works, cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to steel members etc with plain 40 mm lap joints or welded / riveted seams including bending, turning up, mitred angles, stopped ends, outlets etc as required all as specified and as directed.

Supply and fix rolled mild steel in: Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of Fe-410- W(Gde-E-250) quality-B all as specified and directed.

Fixing only Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

Supply and fix pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed.

Supply and fix hold fasts, bands, straps and similar small articles confirming to Fe-290 Gde-E-165. all as specified and directed.

Supply and fix framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

Supply and fix framed work such as grills, gratings and guard bars etc with ends of bars shouldered, welded with confirming to Fe.290.Gde-E-165 etc all as specified and directed.

Supply and fix Welded steel wire fabric not excceding 4.00 kgs per sqm and fixed complete to steel members/wood or on walls including necessary welding/shouldering etc all as specified and directed.

Supply and fix 1.25 mm thick Mild Steel sheet in wall cladding, steel gates, etc., cut to size, holes punched including fixing to MS clamps with necessary bolts and nuts all as specified and directed.

Supply and fix Anodised aluminium powder coated frame for doors, windows and for partition walls with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

Supply and fix Anodised aluminium powder coated window and ventilator shutters, side hung type /sliding type without sash bars aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing cleaps, rubber neoprane packing, aluminium snap beading, screws, anodised aluminium fittings such as peg stay 150 mm long for each shutters, hinges type B-21, 100mm long -2 Nos, handles 2 Nos of suitable size, Tower bolts 2 Nos in each windows etc completeall as specified and directed.

Supply and fix Anodised poweder coated aluminium of any colour snap grid of size 605x605mm frame work for false ceiling (thickness of powder coating not less than 50 micron) includig hangers 6mm dia GI (up to 1200mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long and 12mm thick Gypsum board of size 600x600mm glosy finish pre painted in ceiling(2 coats of distemper over a coat of primer) fixed with screws as per manufacturers instructions complete all as specified and directed.

Supply and fix including stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fix 12 mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice laminations fixed, etc all as specified and as directed.

Dismantling of wall/floor heatrth or wall tiling including cement mortar bedding(but not backing coat)and removing rubbish off the premises all as specified and directed.

Material and labour for forming of constrution joint 30 mm deep x 10 mm wide filled with sealing compound grade 'B'. all as specified and directed.

Supply and fix Aluminium flat 1 mm thick to be fixed to rubber tiles with wall surfaces with proper screws all as specified and as directed

Material and labour for Sadar halli machine cut stone slab 50 mm thick in flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. Note : screed bed shall be paid and measured separately.

Material and labour for 25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate), as in sub floors all as specified and directed.

Material and labour for coloured rubber tiles 10 to 15mm thick fixed to vertical surfaces with suitable adhesive all as per manufacturer instruction all as specified and directed.

Material and labour for 75 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) for path/ hard standing all as specified and directed. .

Material and labour for 75 mm thick Cement concrete 1:4:8 type D-2 (40 mm graded aggregate) as in sub base to flooring all as specified and directed.

Material and labour for 100 mm thick Cement concrete 1:2:4 type B-1 (20 mm graded stone aggregate) Finishing cement concrete surface even and smooth without using extra cement Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is greenas in flooring all as specified and directed.

Material and labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base over and including 20 mm thick cement screed base in CM1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Material and labour for Coloured glazed ceramic tiles economy finish Gde B-II (b) quality of size 450 x 300 x 7 mm thick with rectified edges as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and incl 10 mm thick backing with CM 1:4 all as specified and directed.

Material and labour for 20mm thick granite work (table rubbed polished ) for steps,jambs,pillars, window cills and similar items in CM 1:4 including pointing in white cemnet 1:2 using marble dust with admixture of pigment to match with shade of granite over10 mm thick backing coat CM 1:4 all as specified.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situtations all as specified and directed.

Material and labour for machine pressed rubber molded coloured precast concrete interlocking paver blocks / tiles , any shape & size with grey cement and pigment confirming to IS-15658-2006 M-35 of 60 mm thickness laid over 50 mm thick sand cushion all as specified and directed. (Note: Sand cushion shall be measured and paid seperately).

Taking down cement plaster on brick or or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc. all as specified and directed.

Material and labour for 5 mm thick cement plaster in Cement morter (1:3) as in ceiling finished even & smooth without using extra cement all as specified and directed.

Material and labour for 15 mm thick cement plaster on internal surfaces in cm 1:6 finished even & smooth with out using extra cement all as specified and directed.

Material and labour for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished fair and even and smooth with out using extra cement all as specified and directed.

Material and labour for two coats of Acrylic distemper over a thin layer of putty on new plastered surfaces all as specified and as directed.

Material and labour for complete removal of existing treatment and applying thin layer of putty and two coats of oil bound distemper over old urfaces all as specified and as directed.

Material and labour for two coats of Acrylic distemper over a coat of primer on walls, pillasters, cornices, etc., necessary preparation of surfaces all as specified and as directed.

Material and labour for finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) all as specified and as directed.

Material and labour for preparation of new plastered surfaces on walls and applying three coats of white wash all as specified and as directed.

Material and labour for one coat of Acrylic distemper on old distempered walls, pillasters, cornices, etc., including necessary preparation of surface by washing, rubbing down and stopping all as specified and as directed.

Material and labour for preparation of surface by washing, rubbing down and stopping one coat of weather proof exterior emulsion on old decorated surfaces of walls, pillasters, roof projections, facias, drops, chajjas, etc., all as specified and as directed.

Material and labour for preparation of new concrete Surfaces and applying two coats synthetic enamel paint of any description over 10cm girth or width, not otherwise described all as specified and as directed.

Material and labour for preparation of new steel surfaces of any discription, over 10 cm width and girth and applying two coats of synthetic enamel paint over a coat of primer all as specified and as directed.

Material and labour for preparation of wall surfaces and applying 2 coats of cement paint on new surfaces all as specified and as directed.

Material and labour for computerised writing letters or figures (Block roman, Italic or Indian) height of the letter not exc 30 cm to be printed on acrylic plastic board all as specified and as directed.

Material and labour for Stops, commas, short lines, dashes, hyphens, brackets, etc to be printed on acrylic plastic board all as specified and as directed.

Supply and fix 3 mm thick acrylic plastic board as in frames/Name plates/boards/Chart holders fixed to metallic sheet with suitable screws/ adhesive all as directed

Material and labour for one coat of Acrylic distemper on old distempered walls, pillasters, cornices, etc., including necessary preparation of surface by washing, rubbing down and stopping all as specified and as directed.

Material and labour for one coat of weather proof exterior emulsion on old decorated surfaces of walls, pillasters, roof projections, facias, drops, chajjas, etc., including necessary preparation of surface by washing, rubbing down and stopping all as specified and as directed.

Supply and fix 20 mm CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supply and fix 25 mm CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supply and fix in repairs 110 mm dia PVC SWR pipe single socketed with rubber ring joints, laid in trenches or in floors including taking down old pipe all as specified and directed.

Supply and fix in repairs PVC (SWR) bend 110 mm bore any radius all as specified and directed.

Supply and fix in repairs 75 mm bore PVC SWR pipe single socketed in any length with rubber ring joints, laid in trenches or in floors including taking down old pipe all as specified and directed.

Supply and fix in repairs (SWR) bend 75 mm bore any radius all as specified and directed.

Supply and fix 40 mm dia, high-density polythene pipes (HDPE) of pressure rating 6 kgf/sqcm fixed complete to walls, ceilings or in floors including taking down old pipe all as specified and directed.

Supply and fix in repairs of 40 mm dia/bore waste coupling of PTMT (full threaded) suitable for suitable to Kichen Sinks with long screwed shank and fly nut. all as specified and directed. (min wt 45 gms).

Supply and fix aluminium powder coated fancy deco grill 5mm thick complete all as specified and directed.

Material and labour for Point wiring for explosive atmosphere with 1.5sqmm single core PVC insulated and unsheathed cable FRLS 1100V grade with multistranded copper conductor drawn through and including suitable ERW rigid stove enamelled steel conduit with & including bend/elbow/coupling & GI saddling clips etc, fixed on walls, roofs, floors etc. including 1.5 sqmm PVC insulated and unsheathed FRLS cable with stranded copper conductor for earth wire for One light / fan point controlled by one switch all as specified and directed. NOTE : -Flame proof junction box shall be measured and paid separately under relevant item of the schedule.

Supply and fixing Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V all as specified and directed.

Supply and fix flame proof junction box 4/2 way for cable entry complete all as specified and directed.

Supply and fixing LED light fitting 2 x 16-20 Watt flame proof, CMRI certified recommended for gas/vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size all as specified and directed.

Material and Labour for point wiring with PVC insulated and unsheathed multi standard 1.5 Sqmm FRLS copper Cable drawn in and including PVC casing capping 20/25 mm width complete with all accessories including 1.6 mm thick pressed steel terminal boxes with 3 mm thick plastic laminated sheet cover for fixing switch,socket, regulator etc of suitable size to be fixed on wall respectively including white washing/colour washing/distembering to match the disturbed surfaces including PVC insulated and unsheathed multi standard 1.5 Sqmm FRLS copper Cable as earth continuvity connected with common earth dolly complete all as specified and directed.

One light/fan point controlled by one, one way switch 5 Amp.

One 3 pin switch socket outlet, 5 Amps, on independent board.

Supply and fix complete for switch piano flush button single pole one way 5 Amp 240 V all as specified and directed.

Supply and fix switch socket combination 2 in 1, 3 pin 5 Amp flush type 240 volts complete all as specified and directed.

Material and labour for Sub main wiring two single core 2.5 sq mm FRLS PVC insulated cables with copper conductor 1100Volts grade drawn through and including suitable size of non-metallic PVC rigid conduit with conduit accessories / casing and capping fixed up walls, roofs, or floors including one run of 2.5 sqmm FRLS PVC insulated cable and connecting up complete all as specified and as directed. Note : Three runs of 2.5 sqmm copper conductor and one run of PVC casing and capping / PVC conduit shall be measured as one unit length.

Supply & fix in repair PLUTO NEO PANEL 2x2 enviromental freindly, new generation, asthetically designed ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for ceiling of size 600x 600 mm all as specified and directed.

Supply & fix Wall mounting fan, 400mm sweep, suitable to AC single phase 230/240 volts with speed and swing adjustment fixed to wall with bolt / screws complete as specified and directed.

Supply & fix sheet metal enclosure factory made distribution board 240 volts SPN 2 Way complete all as specified and as directed

Supply & fix MCB SPN 6 to 32 Amps 240 volts, 50 Hz AC supply complete all as specified and directed.

M/s. N D KALING

M/S ADITYA CONSTRUCTIONS

C V ATIWADAKAR

M/S MAHADEV M PATIL