864/WS-54/2022-23

Amount

Cleaning and removing all scales and dirt etc from existing water tanks and from mouths of circulating pipes of cpacity exceeding 250 litre but not exceeding 500 litre, cleaning and next date of cleaning to be also written compete all as specified and directed

Cleaning and removing all scales and dirt etc from existing water tanks and from mouths of circulating pipes of cpacity exceeding 500 litre but not exceeding 1000 litre, cleaning and next date of cleaning to be also written compete all as specified and directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete (capacity of tanks exc 250 litre and not exceeding 500 litre) including writing " date of cleaning " and next due date in bold capital letters Exc 4 cm in height all as directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete (capacity of tanks exc 500 litre and not exceeding 1000 litre) including writing " date of cleaning " and next due date in bold capital letters Exc 4 cm in height all as directed

Taking up or down 15mm bore steel water tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down 20mm bore steel water tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.

S&F 15mm bore GI water tubing, medium grade with all fittings and fixed to wall, floor and ceiling etc., complete all as specified and directed by Engineer-in-Charge.

S&F 20mm bore GI water tubing, medium grade with all fittings and fixed to wall, floor and ceiling etc., complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortor bedding(but not backing) removable serviceable tiles to store ancd rubiish of the premises.

M&L for glazed ceramic coloured tiles of size 350x250x7mm or 450x300x7mm thick, best quality as on skirting, dados, walls, vertical surfaces etc., set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles, over and including 10mm thick backing/ rendering in CM 1:3, complete all as specified and directed.

M&L for non skid coloured ceramic tiles, 7-8mm thick (square/ractangular), area of each tile exc 0.06 Sqm but not exc 0.11Sqm as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick in CM 1:4 screed bed or bedding layer, complete all as specified and directed.

M&L for non skid coloured ceramic tiles, 7-8mm thick (square/ractangular), area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick in CM 1:4 screed bed or bedding layer, complete all as specified and directed .

M&L for removing old spun yarn, lagging material from existing GI tubing any size including plaster of paris and removing away to a distance of 50m away from the bldgs complete all as specified and directed.

M&L for lagging to pipes 15mm bore used in internal water sup;ply or plumbing all round with, 25mm thick bounded minerals wool preformed 'SNAP OM' pipe sections of density 144 Kg/Cum confirming to IS 9842 reinforced with chicken mesh wire netting 25 gauge, 20mm msh and POP complete all as specified and directed

M&L for lagging to pipes 20mm bore used in internal water sup;ply or plumbing all round with, 25mm thick bounded minerals wool preformed 'SNAP OM' pipe sections of density 144 Kg/Cum confirming to IS 9842 reinforced with chicken mesh wire netting 25 gauge, 20mm msh and POP complete all as specified and directed

Demolition of cement concrete (unreinforced) as in ground floor and paving, not exceeding 15cm thick below or above ground level, complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8, type D2 (Using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4, type B1 (Using 20mm graded stone aggregate) as in floor finishes complete all as specified and directed.

Dismantling cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out from trenches, if required, complete all as specified and directed

M&L for 110mm bore PVC (SWR) pipe, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed

M&L for 75mm bore PVC (SWR) pipe, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed

S&F stack clamp, made out of flat iron of size 50x5mm and 16mm dia round iron stays including bolts and nuts and screwing ends of stay to wall or roof for 75mm bore pipe, complete all as specified and directed

S&F stack clamp, made out of flat iron of size 50x5mm and 16mm dia round iron stays including bolts and nuts and screwing ends of stay to wall or roof for 100mm bore pipe, complete all as specified and directed

S&F PVC SWR branch piece single, equal or unequal 110mm complete all as specified and directed.

S&F PVC SWR branch piece single, equal or unequal 75mm complete all as specified and directed.

S&F PVC(SWR) bends any radius 110mm complete all as specified and directed.

S&F PVC(SWR) bends any radius 75mm complete all as specified and directed.

S&F in repais vitreous chine wash down water closet (pedestal pattern) white, complete including connection to drain pipe and to flushing pipe, anti-syphonage pipe etc, complete all as specified and directed.

S&F in repairs vitreous china squatting pan, Orissa pattern of size 580mm x 440mm white with including foot rests and including CI 'P' trap but excluding flushing cistern and flush pipe but including provision of PCC 1:4:8 type D-2 bedding, complete all as specified and directed.

S&F in replair vitreous china, white, wash hand basin, flat back of size 550mm x 400mm (Padestal pattern) including MS brackets and cutting for and pinning ends including 32mm dia PTMT waste coupling in full threaded (minimum weight 45gms) but excluding waste pipe, waste fittings etc., complete all as specified and directed

S&F in replair plastic water closet seat cover of any colour, closed pattern with recessed bottom cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

S&F in repairs PVC low level flushing cistern 10 Ltrs capacity, valveless, syphonic action type, white with inlet, ball valve, float and handle including brackets, PVC 32mm dia flushing pipe etc., complete all as specified and directed.

S&F in repair hand shower (telephonic type), chromium plated with 900mm long 15mm bore chrome finish flexible pipe, complete all as specified and directed.

S&F in repair 15mm bore bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, complete all as specified and directed.

S&F in replair 15mm bore angle valve, cast copper alloy, chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for union, complete all as specified and directed.

S&F in replair 15mm bore stop valve, cast copper alloy, chromium plated, fancy type, without shank and cup concealed type, screwed both ends for iron pipe or for union, complete all as specified and directed.

Disconnecting existing PVC water tanks of capacity exceeding 250 litre but not exceeding 500 litre and removeing to store all as specified and directed.

Disconnecting existing PVC water tanks of capacity exceeding 500 litre but not exceeding 1000 litre and removeing to store all as specified and directed.

Rotational moulded polyethylene water storage tank , two layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 500 litres each including all accessories (i.e GI nipples and Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of bore 20mm/25mm (Minimum weight 210 gram) etc), complete all as specified and as directed by Engr-in-Charge.

Description all as srl item No 39.0 above but capacity 1000 litre.

M/S Himalayan Construction and Co.

M/S SUHEEL CONSTRUCTIONS

M/S TAJ DIN KHARI