KMC/S_D/DINESH/SP/25-26

Supplying, fifling & fixing of M.S fabricated pedestal stool of suitable size, consisting of bottom plate, top plate, four nos legs etc febricated with suitable sizes m.s plate, m.s angle conforming to I.S 2062 of latest revision and as per approved drawing & direction of Engineer in charge. The cost includes cost of materials, man power employed for dismantling and fitting fixing, civil works consumables like cutting tools, gas, oxygen, welding rod, anchor bolt of required size, hire charges of machineries, like gas cutting set, welding set, tools & tackles etc including carriage loading & unloading....Rate as per Irrigation & Waterways Dept. Govt. of W.B. ELECT-MECH SCHEDULE -2022 item no. 5.1 F-2, page no 85

Structural M.S Bolt/Nut/Washer (Black)....Rate as per Irrigation & Waterways Dept. Govt. of W.B. ELECT-MECH SCHEDULE -2022 item no. 21, page no 68

Supplying swaged and welded steel tubular pole of following specifications as per IS 2317: 1980) 7m length, 85Kg, 410-SP-03 ....Rate as per Irrigation & Waterways Dept. Govt. of W.B. ELECT-MECH SCHEDULE -2022 item no. 5.3 E.1.3, page no 108

S/F including fabrication, welding, fixing G.I. junction 6 arm projected bkt. with 2 nos. thro’ bolts & nuts of 7"long and 5/8" dia including M.S.pole cap at the top of the junction with set screw etc. as reqd. and as per direction of Engineer-In-Charge for arm 2.1M long (G.I. Pipe) (ISI medium). .... Rate as per UDMA ELECT-MECH SCHEDULE -2018 item no. 26, page no 5

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly (a) Upto 9.0 mtr. Size 0.6x0.6x1.70 mts.... Rate as per PWD Elect. Sch. rate -2017, ITEM NO. 1 A) page no-H-1.

Installation the feeder pillar box only on cement brick foundation including plastering and neat cementing as per specification and direction of E.I.C. c) For large size feeder pillar box....Rate as per UDMA ELECT-MECH SCHEDULE -2018 item no. 37, page no 7

150 Amp TPN Busbars of CU alloy as per SLD (supply of Cu Busbar for electrical power distribution. Rate as per Irrigation & Waterways Dept. Govt. of W.B. ELECT-MECH SCHEDULE -2022 item no. 5.3 D5, page no 105.

Supply and delivery of 320W (peak) solar PV Module with multi crystalline solar cell ( Make: TATA/WEBSOL)... .Rate as per UDMA ELECT-MECH SCHEDULE -2018 item no. 02, page no 57

Supply and delivery of (ABB/L&T/KACO/POWER ONE Make) String Inverter Rated output AC power : 5.8kW AC grid connection type : Three phase 3W+PE or 4W+PE Rated AC grid voltage : 400V Rated output frequency: 50Hz Maximum AC output Current: 10A... .Rate as per UDMA ELECT-MECH SCHEDULE -2018 item no. 1A, page no 57

SUPPLYING OF FOLLOWING XLPE INSULATED ALUMINUM CONDUCTOR ARMORED CABLES OF 1.1KV GRADE AS PER IS 7098 (PART 1) 1988 WITH UP TO DATE AMENDMENTS. (Rate in Rs. Per Mtr) Conductor cross section in 25 SQ MM 4 CORE.. Rate as per Irrigation & Waterways Dept. Govt. of W.B. ELECT-MECH SCHEDULE -2022 item no. 5.3 A2, page no 101.

SUPPLYING OF FOLLOWING XLPE INSULATED ALUMINUM CONDUCTOR ARMORED CABLES OF 1.1KV GRADE AS PER IS 7098 (PART 1) 1988 WITH UP TO DATE AMENDMENTS. (Rate in Rs. Per Mtr) Conductor cross section in 10 SQ MM 4 CORE.. Rate as per Irrigation & Waterways Dept. Govt. of W.B. ELECT-MECH SCHEDULE -2022 item no. 5.3 A2, page no 101.

Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for single, 2, 3, 3½ & 4 core.. Rate as per PWD Elect. Sch. rate -2017, ITEM NO. 3 A) page no-F-1.

Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction) f) 50mm dia 3mm thick Polythene Pipe Rate as per PWD Elect. Sch. rate -2017, ITEM NO. 1 f) page no-E-2.

Supply of 3 pole Thermal over load Relay type MN-12L, Relay range 60A to100A current rating.. Rate as per Irrigation & Waterways Dept. Govt. of W.B. ELECT-MECH SCHEDULE -2022 item no. 5.3 D35, page no 106.

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection Legrand, FP, 100 A.... Rate as per PWD Elect. Sch. rate -2017, ITEM NO. 10 page no-D-8.

Supply and delivery of extended rotary handel of MCCBs (Make: L & T/ABB/ Schneider/Simence/ GE)b) Extended rotary handle 100-160A, 415V… Rate as per UDMA ELECT-MECH SCHEDULE -2018 item no. 52. b), page no 21

Supplying and fixing MCCB SS enclosure with IP- 20/30 protection, pwder coated provision for housing Four pole (4P) MCCB, concealed in wall after cutting the wall & mending good the damages to original finish / on flat iron frame incl. painting, connection & provision for earthing attachment Legrand...Rate as per PWD Elect. Sch. rate -2017, ITEM NO. 12 page no-D-9.

Supply and delivery of spreader Terminal of MCCBs (Make: L & T/ABB/ Schneider/Simence/ GE). a) 100A, 3 pole…. Rate as per UDMA ELECT-MECH SCHEDULE -2018 item no. 53. c), page no 21

Supply and fixing of 240/230 volt, 50 Hz, T.P., power contactor (Make: L & T/ABB/Schneider/Simence/ GE) having contact block of the following range. g) 50-85Amp, 2NO+2NC... Rate as per UDMA ELECT-MECH SCHEDULE -2018 item no. 18. i), page no 16

Supply of 1 pole Electronic Timer type ST100,3-30 Second/ 12-120 Second… Rate as per Irrigation & Waterways Dept. Govt. of W.B. ELECT-MECH SCHEDULE -2022 item no. 5.3 D41, page no 107.

Supply of 240V AC analog time switch for ON-OFF control of street light.. Rate as per Irrigation & Waterways Dept. Govt. of W.B. ELECT-MECH SCHEDULE -2022 item no. 5.3 D13, page no 105.

Supply and fixing of LT panel accessories of approved make in existing LT panel including connections etc. as required as per specification. Supply of 3 Ph LED Ammeter Cl 0.5…Rate as per Irrigation & Waterways Dept. Govt. of W.B. ELECT-MECH SCHEDULE -2022 item no. 5.3 D2, page no 105.

Supply and fixing of LT panel accessories of approved make in existing LT panel including connections etc. as required as per specification. Supply of 3 Ph LED Voltmeter Cl 0.5…Rate as per Irrigation & Waterways Dept. Govt. of W.B. ELECT-MECH SCHEDULE -2022 item no. 5.3 D3, page no 105.

Supply & fixing of 230/240V, LED indicating lamp (make :AE/KAPPA/IMP) Blue/ white color… Rate as per UDMA ELECT-MECH SCHEDULE -2018 item no. 22. a), page no 17

Supply & fixing of control switch of 25A, D.P., 415 V of ON/OFF of type (make :Siemens/ ABB/L&T / Schneider)... Rate as per UDMA ELECT-MECH SCHEDULE -2018 item no. 22. a), page no 17

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : (c)For 4 core upto 10 sqmm.. Rate as per PWD Elect. Sch. rate -2017, ITEM NO. 7 c) page no-F-4.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : (c)For 4 core upto 25 sqmm.. Rate as per PWD Elect. Sch. rate -2017, ITEM NO. 7 c) page no-F-4.

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : : (xi) 4 core 10 sqmm cable.. Rate as per PWD Elect. Sch. rate -2017, ITEM NO. 8 b) xi page no-F-5.

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : : (x) 4 core 25 sqmm cable.. Rate as per PWD Elect. Sch. rate -2017, ITEM NO. 8 b) xiii page no-F-5.

Supplying and Drawing 1.1 KV single core stranded 'FR'PVC insulated & unsheathed single core stranded copper wire(Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required item no. C. 1.e . 3 x 36/0.3 (2.5 sqmm). Rate as per PWD Elect. Sch. rate -2017, page no-E-9..

Supplying and Drawing 1.1 KV single core stranded 'FR'PVC insulated & unsheathed single core stranded copper wire(Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required .item no. C. 1.d. 2 x 36/0.3 (2.5 sqmm) Rate as per PWD Elect. Sch. rate -2017, page no-E-9..

Supplying and Drawing 1.1 KV single core stranded 'FR'PVC insulated & unsheathed single core stranded copper wire(Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required item no. C. 1.a. 2 x 22/0.3 (1.5 sqmm). Rate as per PWD Elect. Sch. rate -2017, page no-E-9.

S/F M. S. loop box (10 SWG) of size 10.3/4 “x 8.3/4” x 5" (269mm x 219mm x125mm) having almirah type cover complete with special type locking arrangement including S/F 8 “x6” x1/4" (200mm x 150mm x 6 mm) bakelite sheet 1 no. 4-way ebonit connector block, 1 No. 15 Amp fuse unit fitted inside the box and suitable size danger board riveted on cover of the box outside & fixing the box with pole by means of M.S. Clamps of 1"x1/4" (25mm x 6mm) of suitable length and encasing the box by 1:3:6 cement concrete with graded stone chip (3/4" down). The depth of the concrete should be 60cm x 54cm x 54cm including plastering and neat cementing and S/F 2 Nos. compression gland of suitable size and making all necessary connections as reqd.... Rate as per UDMA ELECT-MECH SCHEDULE -2018 item no. 34, page no 6

Soil Excavation : Excavation of soil for installation of Earth Electrode and filling & ramming (b)For Morrum Soil. Rate as per PWD Elect. Sch. rate -2017, item no. 1 (b)., page no-G-1.

Earthing with 50 mm dia GI pipe3.64 mm thick x3.04 Mts. long and 1x4 SWG GI (HotDip) wire (4Mts. long), 13mm dia x 80 mm long GI bolts, double nuts,double washers incl. S&F 15 mm dia GI pipe protection (1Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below (a) By ISI-Medium GI pipe:. Rate as per PWD Elect. Sch. rate -2017, item no. 2 (a)., page no-G-1.

Sub Total