Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.8 LAccepted-AOC 2 MANORATH MAIMOLEM VASCO DA GAMA GOA 403802 | VASCO DA GAMA | SOUTH GOA | GOA | 403802 | ₹27.8 L Quoted ₹28.1 L | L1 | Accepted-AOC AOC |
| 2 | L2₹28.5 LRejected-Finance | ₹28.5 L | L2 | Rejected-Finance Rejected
L1 being accepted |
| 3 | L3₹29.3 LRejected-Finance 601 6TH FLOOR MANGOOR VALLEY NEAR GURUDWARA MANGOOR HILLL VASCO DA GAMA GOA 403 802 | SOUTH GOA | GOA | 403802 | ₹29.3 L | L3 | Rejected-Finance Rejected
L1 being accepted |
| Sl No | Description | Qty | Unit | M/s Harshal Traders L2 | Heat Control L1 | SHIVANI ENTERPRISES L3 |
|---|---|---|---|---|---|---|
| 1.00 | M & L for Servicing and repair of voltage stabilizer of capacity upto 20 KVA after disconnecting all electrical connections of stabilizer and check the auto/manual function of stabilizer, to check the oil level, oil seal leakage if any, check voltmeter and Amp meter working condition or not. Taking out top cover of stabilizer for replacing defective spares/ items, cleaning the dust by air blower, check the neutral and earthing connections properly to check all nuts, bolts tightining and refixing the same in existing position and reconnect all the incoming/ outgoing cables properly including testing and commissioning, complete all as specified and as directed.
Note :- (i) Replacement of defective spares for making the voltage stabilizer units in satisfactory working condition shall be measured & paid separately under relevant items as 'Supply only'
(ii) Labour charges for taking out old spares & refixing of new spares shall deemed to be included in unit quoted rate. | 2 | Each job | 4,500 ₹9,000 | 5,500 ₹11,000 | 6,200 ₹12,400 |
| 2.00 | All as per item No. 1.00 here in above but 100 KVA, complete all as specified and as directed. | 4 | Each job | 6,000 ₹24,000 | 12,000 ₹48,000 | 12,300 ₹49,200 |
| 3.00 | All as per item No. 1.00 here in above but 150 KVA complete all as specified and as directed. | 2 | Each job | 6,000 ₹12,000 | 16,500 ₹33,000 | 18,000 ₹36,000 |
| 4.00 | Supply only electronic servo circuit card (PCB), complete all as specified and as directed.
(Make:- AE/ APLEB/ ANDREWYULE /SINETRAC/ VOLINA/ VINITEC/ IECO/ V-GUARD/ INDIAN TRANSFORMER & ELECTRICALS PVT LTD. | 2 | Each | 8,700 ₹17,400 | 12,000 ₹24,000 | 13,200 ₹26,400 |
| 5.00 | Supply only servo control panel, complete all as specified and as directed. (Make:- AE/ APLEB/ ANDREWYULE /SINETRAC/ VOLINA/ VINITEC/ IECO/ V-GUARD/ INDIAN TRANSFORMER & ELECTRICALS PVT LTD. | 2 | Each | 9,000 ₹18,000 | 11,400 ₹22,800 | 12,600 ₹25,200 |
| 6.00 | Supply only trigger (control) transformer 9V/18V, complete all as specified and as directed.
(Make:- AE/ APLEB/ ANDREWYULE /SINETRAC/ VOLINA/ VINITEC/ IECO/ V-GUARD/ INDIAN TRANSFORMER & ELECTRICALS PVT. LTD.(GURGAON) | 2 | Each | 1,500 ₹3,000 | 1,250 ₹2,500 | 800 ₹1,600 |
| 7.00 | Supply only carbon brush , complete all as specified and as directed. (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD) | 2 | Each | 1,200 ₹2,400 | 160 ₹320 | 180 ₹360 |
| 8.00 | Supply only dimmer 8 Amps, complete all as specified and as directed. (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD) | 3 | Each | 8,500 ₹25,500 | 4,800 ₹14,400 | 4,800 ₹14,400 |
| 9.00 | Supply only dimmer 40 Amps, complete all as specified and as directed. (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD) | 1 | Each | 24,000 ₹24,000 | 16,400 ₹16,400 | 17,000 ₹17,000 |
| 10.00 | Supply only dimmer 60 Amps, complete all as specified and as directed. (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD) | 1 | Each | 35,000 ₹35,000 | 17,800 ₹17,800 | 18,900 ₹18,900 |
Updated dates
Tender Value
₹30.9 L
EMD Value
₹62,000
Closing Date
16 Feb 2026, 6:00 pmClosed
GE (P) Navy Mandovi
GE (P) Navy Mandovi Military Engineer Services INS Mandovi
As per tender documents
2025_MES_742665_2
8663/E8 GE (P) NAVY MANDOVI
Open Tender
Electrical and Maintenance Works
330 days
Mandovi
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE (P) Navy Mandovi
₹62,000
Yes
9 Apr 2026
22 Jan 2026
18 Feb 2026
22 Jan 2026
16 Feb 2026
2 Feb 2026
23 Jan 2026 - 31 Jan 2026
All as per item No. 1.00 here in above but 100 KVA, complete all as specified and as directed.
All as per item No. 1.00 here in above but 150 KVA complete all as specified and as directed.
Supply only electronic servo circuit card (PCB), complete all as specified and as directed. (Make:- AE/ APLEB/ ANDREWYULE /SINETRAC/ VOLINA/ VINITEC/ IECO/ V-GUARD/ INDIAN TRANSFORMER & ELECTRICALS PVT LTD.
Supply only servo control panel, complete all as specified and as directed. (Make:- AE/ APLEB/ ANDREWYULE /SINETRAC/ VOLINA/ VINITEC/ IECO/ V-GUARD/ INDIAN TRANSFORMER & ELECTRICALS PVT LTD.
Supply only trigger (control) transformer 9V/18V, complete all as specified and as directed. (Make:- AE/ APLEB/ ANDREWYULE /SINETRAC/ VOLINA/ VINITEC/ IECO/ V-GUARD/ INDIAN TRANSFORMER & ELECTRICALS PVT. LTD.(GURGAON)
Supply only carbon brush , complete all as specified and as directed. (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD)
Supply only dimmer 8 Amps, complete all as specified and as directed. (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD)
Supply only dimmer 40 Amps, complete all as specified and as directed. (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD)
Supply only dimmer 60 Amps, complete all as specified and as directed. (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD)
Supply only dimmer 125 Amps, complete all as specified and as directed. (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD)
Supply only servo motor 3 K.G torque single phase with RC, complete all as specified and as directed. (Make:- AE/ APLEB/ ANDREWYULE /SINETRAC/ VOLINA/ VINITEC/ IECO/ V-GUARD/ INDIAN TRANSFORMER & ELECTRICALS PVT. LTD.(GURGAON)
Supply only servo motor 10 K.G torque single phase with RC, complete all as specified and as directed. (Make:- AE/ APLEB/ ANDREWYULE /SINETRAC/ VOLINA/ VINITEC/ V-GUARD/ INDIAN TRANSFORMER & ELECTRICALS PVT. LTD.(GURGAON)
Supply only rotary switch 5 Amp for R.Y.B phase, complete all as specified and as directed. (Make:- AE/ L & T (RISHABH)/SECURE/ C & S ELECTRIC/HAVELLS/ ANCHOR)
Supply only PCB holder, complete all as specified and as directed. (Make:- AE/ APLEB/ ANDREWYULE /SINETRAC/ VOLINA/ VINITEC/ IECO/ V-GUARD/ INDIAN TRANSFORMER & ELECTRICALS PVT. LTD.(GURGAON)
M & L for refilling/topping up/replacement of stabilizer oil with new dehydrated stabilizer oil. Open lid cover of stabilizer including changing of gasket set if required complete and re-fixing of top lid cover without any damage to stabilizer suitable for working voltage 440 volts grade including necessary dehydration to achieve dielectric strength min 40 KV including internal/external connection and testing on load of stabilizer, complete all as specified and as directed. (Make:- HPCL(SEETAL)/ HP (SEETAL)/ SERVO/GULF/ CASTROL)
Supply and fix in replacement 4 pole power contactors Type MCX of rating up to 50 Amp with suitable coil voltage as per site requirement /make /Base size as match with existing complete all as per Make : L & K /C & S / Siemens.
Supply and fix in replacement 4 pole power contactors Type MCX of rating 200 Amp with suitable coil voltage as per site requirement /make /Base size as match with existing complete all as per Make : L & K /C & S / Siemens.
Supply,install,test and commissioning of out door type double door LT panel made out of 3.0 mm thick CRCA sheet , made out from CPRI Approved firm, totally enclosed weather dust and vermin proof as per IS with front opening suitable locking arrangement having copper bus bar of 600 Amp capacity for RYB and neutral and insulated with insulators, including connecting incoming and outgoing cables, with necessary PCC 1:3:6 in foundation and made out of 50 X 50 X 6 mm angle iron grouted at ground and 30 cm above from ground level Comprising the following all as specified and as directed by the engineer - in-charge. Note: Cost includes necessary internal wiring for meters , CT's as required for operation of AMF panel / ATS , indication lamps,etc and Rigid copper bus bar connections from bus bar to MCCB terminals and suitable size copper wire for control wiring and Indicating lamps complete all as directed. Make: CPRI approved manufacturer (a) MCCB 320 Amp, 36 KA -02 Nos (b) ATS 400 Amp with necessary power pack suitable rating , necessary Auxillary contactors as required site for smooth operation of ATS - 01 Nos (c) Indicating lamp , RYB for Main and stand by Supply - 01 Set (d) Indicating lamp for Load on Load on Main/Load on Stand By supply - 01 Set (e) Led type Dual Source Multi Function Meter - 01 Nos (f) Control wiring with suitable rating copper conductor multi standed from ATS to Main Supply /Stand BY Supply for Operation of Automatic Transfer operation of Power supply , - 01 Job Note: Rate include necessary control wiring from DG set to to AMF panel/ATS for Auto manual operation
M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level,using galvanised iron strip 25×4mm as earthing lead with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 40 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion.
S & F in replacement test point terminal block made of phosphorus bronze size 75 x 75 x 25 mm thick drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screws fixed to copper strip bracket fixed in MS box of of suitable size on wall as complete all as specified and directed
Supply and fixing replacement porcelain vitreous white/brown/green spacers insulator of size 75mmx35mmx40mm height complete with one number galvanized iron stud bolts 6mm dia x 40mm long including nut & washers and two number galvanized iron fixing bolts of size 6mm dia and 50 mm long including washers and drilling holes for holding /foxomg aluminium strip/roof conductor as required including taking down the broken insulator complete all as specified and as directed by the Engineer-in-Charge.
M&L in replacement Tubes,light grade' galvanised, with all fitting and fixed complete to walls and ceilings by flat iron clamp nuts bolts etc complete or laid in floors 40 mm dia complete all as specified and directed.
Supply and fix in replacement Volt meter 0-500 Volt , three phase Digital type of size 96 X 96 Sq mm flush mounted case in existing panel including wiring from bus bar to volt meter terminals so as to match with the existing control wiring complete all as specified and as directed by the engineer - in-charge [Make: Neptune/ AEI/ Meco/ HPL/L & T ]
Supply and fix in replacement Digital Ammeter three phase of size 96 X 96 Sq mm flush Mounted of following range in existing panel with necessary wiring from CT to Ammeter and so as to match with existing control wiring complete all as specified and as directed by the engineer - in-charge .[Make: Neptune/ AEI/ Meco/ HPL/L & T ]
Supply and fix in replacement current Transformer of 50 /5 CT ratio,Indoor tape INsulated Ring type in existing panel in cludintg taking down old unserviceble CT's of any make /Rating complete all as specified and as directed by the engineer - in-charge . [Make :Neptune /AE / Kappa]
All as per the item no 26 above but for CT ratio 100 /5 Amps .
All as per the item no 26 above but for CT ratio 150 /5 Amps .
MCCB 63 to 100 Amp 4 pole 16 KA ; Make: Legrand / L & k /Havell's/C & S
MCCB 125 Amp 4 pole 16 KA ; Make: Legrand / L & k /Havell's/C & S
MCCB 200 Amp 4 pole 25 KA Make: Legrand / L & k /Havell's/C & S
MCCB 250 Amp 4 pole 25 KA Make: Legrand / L & k /Havell's/C & S
Supply only copper winding wire with supper enamelled copper wire of suitable gauge as per capacity/Rating of Voltage stabilizer /LT transformer winding complete all as specified and directed by Engr - in - charge.
M & L for Maintenance of LT ACB of rating from 630 Amp to 2500 Amp 415 Volt 50 HZ of any make installed at LT panel boards at NPOL complete by taking the shut down with prior intimation and cleaning the ACB by using air blower tightning of connection of control circuit and complete checking of all fuses, checking relay and control circuit for smooth functioning by employing one skilled tradesman as and when required and also to carry out following works . Note: Unit rate include for preventive maintenance / attending break down as and when required. Check and clean incomming and out going terminals / compartment Checking the servicebility of close and trip coil condition and taking out for repalcement. Checking the servicebilty of control circuit , relays ,fuses and Electrical /Mechanical interlocks, Replacing the spares such as Shunt release , UV release ,tripping/Closing coil shall be measured and paid seperately under respective item. Note : (a) Rate Quoted deemed to be including cost of replacing small piece of control circuit wires up to 1.00 Mtrs , LT fuses and Push buttons for ON/Off if required .
Supply and fix in replacement shunt release for LT ACB 415/240 Volt AC up to 2500 Amp as per existing. Make : L & T( L & K) GE/Havell's/English Electric
Supply and fix in replacement under voltage release 415/230 Volt suitable for LT ACB of rating up to 630 Amp as per existing Make : L & T ( L & K) / GE/Havell's/ English Electric
Supply and fix in replacement earth fault release 415/230 Volt suitable for LT ACB of rating up to 630 Amp as per existing Make : L & T ( L & K) / GE/Havell's/ English Electric
Supply and fix in replacement breaker control module suitable for LT ACB of rating up to 630 Amp as per existing Make : L & T ( L & K) / GE/Havell's/ English Electric
Supply, install, test and commission of Automatic power factor improvement panel of 50 KVAR capacity including APFC relay, capacitor of type heavy duty cylindrical , contactors and control wiring with copper wire in out door type panel board made out of 3.0 mm thick CRCA sheet, CPRI approved , including cooling fan,copper bus bar of 200 Amp capacity ,(independent cabin including locking arrangement for each, bus bar chamber etc with all necessary protection etc and 125 Amp capacity MCCB TPN rup capacity 16 KA as incomer complete all as specified and as directed . The panel shall be fixed with angle iron frame made of angles of size 50 X 50 X 6mm, bolted in ground /fllor mounted and comprising the following. Make: CPRI Approved Maufacturer
Capacitor duty contactor suitable for 50 KVAR
Capacitor duty contactor suitable for 25 KVAR
Capacitor duty contactor suitable for 20 KVAR
Capacitor duty contactor suitable for 15 KVAR
Capacitor duty contactor suitable for 12.5 KVAR
Capacitor duty contactor suitable for 5/8.5 KVAR
Supply and fix in replacement 8 - tage APFC relay suitable for Single CT input ( CT Ratio 1A/5 A as per site) with built in P.F Meter after dismatling the existing meter from APFC unit and programme the newly installed relay unit as per OEM instructions or in presence of OEM representative to match with existing arragement of capacitor banks complete all as specified and as directed by engineer in charge. [Make :C & S / L & K ]/ Siemens
Supply and fix in replacement Capacitor banks, in existing APFC panel , Cylindrcal type Heavy duty Suitable for Voltage rating up to 480 Volt, rating as required at site as specified and directed by EIC .(Make : EPCOS/ C & S/ L & T/) Note: Contractor has to replace the capacitor banks as the same rating /Rating as directed as per site requirement with multiple unit of Cpacitor bank of 5 KVAR to 50 KVAr as per site requirement.
Supply and ix in replacement LED type piolet lamp suitable for working voltage range up to 240 Volt AC . [Make : Neptune / L&K / Vaisnavo C &S/HPL]
Supply and ix in replacement Push button suitable for working voltage range up to 240 Volt AC . [Make : Neptune / L&K / Vaisnavo C &S/HPL]
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning
Supply and fix MCB 40 to 63 Amp 4 Pole ,10 KA complete all as specified and as directed
Supply and fix MCB 6 to 32 Amp 4 Pole ,10 KA complete all as specified and as directed
S & L sand cushioning for cable duct inside the HT/LT substaion to fill the duct all as specified and as directed .
Supply and fix in replacement 2KVA Inverter ,Pure Sine Wave 2000VA/ 24V; Peak Load: 1680W having Comprehensive protection against short-circuit, reverse polarity, battery over-charge, deep-discharge , Bypass switch for supplying output directly from grid in case of UPS fault, with Battery Compatibility of 2X (12V) battery of Capacity Between 80 Ah-220 Ah Battery ,Supports wide range of Batteries Like A Flat Plate, Tubular type ,
S & F partical board one side laminated 18 mm thick with aluminium channel at all side and mounting wall with necessary bracket fixed to wall for fixing the drawings / Charts all as specified and as directed by Engr-in Charge
M & L for paste flexboard/ Printed sheet on partical board dully print of single line diagram of HT and LT cables / Installation details / equipment details /installation notice boards /shoke treatment charts etc in multi colour all as specified and all as directed by Engr-in Charge Note: (i) Rough drawing /Details ( Hard copy) of equipment and plant will be given by Department. The contractor has to develop the same with legends/ signs asper the standards on computer in multicolour and same get it approved from engineer in charge . (ii) Installation / equipment details including the details of all equipments in plant like switch gear units , pumps , compressor and valves, contractor has to develop the drawing in multi colour using proper legends as per standards
M & L for laying grade stone aggregate of size 40 mm in E/M installation all as directed by EIC.
M & L for laying graded stone aggregate of size 20 mm in E/M installation all as directed by EIC.
M & L for laying graded stone aggregate of size 12.5 mm in E/M installation all as directed by EIC.
M& L for surface excavation at E/M installations and store yards not exceeding 30 cm deep and averaging 15 cm deep and getting out soft / loose soil removing shrubs, small trees height up to 1.0 Mtrs , removing the grass from route as directed , Note : (i) Rate includes removing all waste material and grass not excceding 50 Mtrs distance from installation ,depositing where directed at a level not exceeding 1.5 Mtrs above the starting point and cleaning of yard , Complete all as specified and directed by EIC. (ii) Cleaning should repeated in same installation in every three months
Supply and fix Non-Magnetic smooth and clear surfaced boards, White Boards with aluminium channel at all side including two numbers of regularer erasable marker pens and one duster with necessary fixing arrangments to fix in wall / stand as directed by Engineer in charge
Supply and fix Pin-Up Board, , with aluminium channel at all side including two numbers of regularer erasable marker pens and one duster with necessary fixing arrangments to fix in wall / stand as directed by Engineer in charge
M&L for cross arm ,bracings,support,clamps and back plates fabricated from structural steel section including nuts, bolts,washer, welding ,drilling hole for bolts ,bending in any shape or size as indicated or directed and inclusive of one coat of aluminium primer,one under coat and one finishing coat of aluminium paint for for repair /repalcement of portion of existing ladder at OHT as per existing specification / frame /cover for valve chamber etc complete all as specified and as directed
M & L for Dismantling cross-arms of M.S. channel or angle sections etc. complete and setting aside for re-use with in 50m
M&L for PCC 1:3:6 type C1 20 mm graded aggregate in coping of pole complete including demolition of existing PCC copping complete all as specified and as directed
S & F in replacement out door type Weatherproof LED display board /LED scrolling display board fully customized as per the Applications for displaying the notice /Alarm with necessary fixing arrangement on wall complete of following specification all as specified and as directed Note: Number of boards as per site requirements Module Resolution : not less than 16 x 32 pixel Connectivity : Pen Drive, Wi-Fi, RS232, RS485, Ethernet Display Function : notice / Graphics, Animation Pixel Pitch : not less than 10mm
Supply, fabricating, installation, in replacement self illumnated acrylic LED Sig Board factory made with fixed on wall /iron frame as directed Letter Length 30 cm max up to 40 cm Letter Thickness 5 cm max up to 6 cm Customized Design of letters back-lit signage including embedding the signage baord firmly with the wall/ MS Angle frame/as per approved Art work and nomenclature as given below :- Note: Nomenclature of sign board include letters/Logos etc complete as directed.
Box with frame :- 25 x 25 mm square pipe (18 G) frame with cross supports @ spacing not exceeding 1.0 m on the box length including 20 mm x 20 mm MS Square pipe (18 G) stifferenrs duly white enamel painted in 2 coats over a coat of zinc oxide iron primer, depth of box should not be less than 165 mm, Side, Top, Back and bottom Panels :- Made out of 24 gauge chemically treated GI Sheets duly precoated / powder coated with white MATT finish coating on both inner and outer surface. Top panel to have 24 guage precoated drip cap (fixed with pop rivet or machine moulded to shape) of 25 mm on front and side to prevent damages due to rain etc. The bottom panel should be provided with access door fixed with ss screws and suitable housing for LED drivers. LED Module :- LED 12V Module beam angle >=150 degrees with IP rating >= 64, 0.72 W/70 Lumens per module of 3 LEDs with 7000 to 8000 K colour temperature, Make : Tridonic / Osram / Cree / GE LED configuration :- 29 LED Modules per Sq mt (Equal division on spacing based on height of box) and one module every 0.20 m on running length of box. LED power supply :- Input 230 V AC, power supply should be CPCC (Constant power constant current) of 30W/60W/120 W each. Graphics :- Graphics shall be computer plotter cut with translucent cast vinyl matching the colour specification of the installation.
S & F junction box made from SMC/FRP sheet ready made of size Junction box of size 295x195x100 mm with aluminium bus bar of 100 Amp capacity for RYB and half for neutral made in suitable size fixed inside the junction box with necessary supporting insulators fixed on hylem sheet ,MS sheet steel fixed inside the bottom portion of box to connect the cable gland complete , entire assembly fixed to pole /Wall with MS clamp 25 X 5 mm and nuts & bolts, including MCB SP 6 Amp 10 KA 240 V - 1 No, with necessary size copper lugs for connecting cables from junction box to fittings complete all as directed by Engineer-in-Charge . Make: Sintex (right hinged)
M & L for Mild steel plates, plain or chequered, 5mm thick or over in thickness Fe 410-W (Gde-E- 250) quality-A complete all as directed
M & L for paiting on new Mild steel plates, plain or chequered along with two coat of priming with red oxide and one finishing coat of synthetivc enamal paint t by using Spray painting /Mannually applying complete all as directed
M & L for preperation of old painted surface of on Mild steel plates, plain or chequered plate cable protection cover /stell surfaces of cross arm / support frame and apply new coating along with two coat of priming with red oxide and one finishing coat of synthetivc enamal paint by using Spray painting /Mannually applying complete all as directed
S & F cable 3 core PVC insulated unsheathed multistranded copper conductor of sie 2.5 Sq mm in replacement passing through PVC conduit from junction box to fitting complete all as directed by Engineer-in-Charge. (Note: PVC conduit is measured and paid seperately) Make: Finolex/Poly Cab/Havell's/KEI
S & F cable 3 core PVC insulated unsheathed multistranded copper conductor of sie 4.0 Sq mm in replacement passing through PVC conduit from junction box to fitting complete all as directed by Engineer-in-Charge. (for street lights/ flood ligts) Make: Finolex/Poly Cab/Havell's/KEI Note: PVC conduit is measured and paid seperately.
S & F rigid PVC non metalic conduit 20mm dia on pole with ,poles clamps ,nuts & bolts, / wall with saddles with necessary bend Elbow ,couplers ,check nuts connected to junction box to fitting etc in replacement complete all as directed by Engineer-in-Charge including painting to clamps. Make: Precision Finolex/Prestoplast/Modi.
Excavation in trenches not exceeding 1.5 metre wide and not exc 1.5 metre in depth for foundation of pole / stay, or cable trenches and getting out in hand / soft disintegrated rock complete all as specified and as directed by the Engineer in charge
Returning filling in incl spreading, leveling watering and well ramming in layers not exceeding 25 cm in soft loose soil complete all as specified and as directed by the Engineer in charge
Removing excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point all as specified and as directed by the engineer –in- charge.
Supply and laying double walled corrugated (DWC) HDPE duct pipe of size 50 mm Outer Dia conforming to IS, approved colour complete with fittings for cable protection. Note: The inner /Outer dia of Pipes may varies asper Make Approval /Market availability contractor has to supply the size of pipe not less than menstioned below)
25 Sq mm 3.5 Core
16 Sq mm 4.0 Core
10 Sq mm 4.0 Core
Cable of size from 35 sq mm to 70 sq mm 3.5 / 4 core
Cable of size from 10 sq mm to 25 sq mm 2/3.5 / 4 core
Supply and fix fire retardant insulated synthetic mat for LT , 1100 Volt of 2.0 mm thick +/- 10% conforming to IS , tested for breakdown strength, ageing properties, insulation resistance, effect of acid,Alkaline, Diesel & transformer oil ,leakage current test,fire test etc having the width of 1000mm +/-20mm complete as required sutable and using adhasive and alied chemical and scaling of all part s of all joints and border ends and fixing tape making good as paste near LT panel boards complete all as specified and as directed. Make: Vardhaman/Jyothi/Cease fire/Qquivalent
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
technical_839577.pdf
techsummary_839577.pdf
finance_839577.pdf
BOQ Comparative Chart
xlsx
finsummary_839577.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.24 MB
TenderPages.pdf
Tender Documents • 0.19 MB
BOQ_839577.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid