Providing Basic tourist Infrastructure in Piranmalai at Sivagangai District.

Amount

Clearing the Heavy Jungle by deploying JCB and the same stacked away from the work spot for disposal. The rate inclusive of Hire charges for machinary, fuel and driver betta, etc., complete.

Earthwork excavation for foundation in all soils except hard rock requiring blasting to a full depth with an initial lead of 10m and lift of 2m in hard stiff clay,stiff black cotton,hard red earth mixed with small size boulders etc.,complete.

Supplying and Filling in foundation and basement with river sand in layers of 150mm thickness well watered rammed and consolidated complying with relevant standard specification.

Supplying and filling in foundation and basement excavated earth soil in layers not more than 16cm thick well rammed watered, consolidated and compacted etc., complete.

Cement Concrete 1:5:10(One Cement five sand ten aggregates) using 40mm gauge HBG jelly inclusive of shoring strutting and baling out water where ever necessary ramming curing etc., complete in respects complying with relevant standard specification and as directed by the Department Officers.

Plain cement concrete 1:2:4 (one cement two M.sand four jelly) using 20mm HBS jelly of B.S.S guage for foundation and flooring including cost and conveyance of all matreials, labour etc complete, Complying with standard specification.

Damp Proof in cement mortar 1:4, (one cement and four sand) 20mm thick mixed with Impermo powder 2% by weight of cement ect., complete.

Brickwork in Cement Mortar 1:5 (One cement and five sand) using IInd class chamber burnt bricks of size 9"x4½"x3" including cost and conveyance of all materials and labour charges and all other incidental charges etc.,complete complying with standard specification.

a) Upto For Basement

a) In Ground Floor

Brick partition wall in Cement Mortar 1:3 (One cement and three sand) 11.40 cum. thickness using II class chamber burnt bricks of 9” x 4 ½” x 3” including both side plastering with CM 1:5, 12mm thick and using hoop iron with reinforcement if found necessary etc. complete.

a) In Ground Floor

Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).

a)Upto Basement

b) In Ground Floor

Supplying fabrication and placing in position of MS (or) Rts bars for all RCC works including cutting bending placing and cost of binding wire etc.,complete.

Centering for soffits of RCC slabs of plane surface like lintels, beams,stair waist slabs & landing slabs ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X '3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed by the corporation officers.

a) Column Footing and Plinth Beam

b) Plain Surfaces Beams, Roof slab

c) Centering for Sunshade and Rectangular Column

Special ceiling plastering for R.C.C slab beam and sunshades with cement mortar 1:3 ,10mm thick including tacking finishing neatly, cost and conveyance of all materials and all labour charges,curing etc., complete complying with standard specifications.

Plastering with Cement Mortar 1:5 (One cement and five sand),12mm thick including cost and conveyance of all materials and all labour charges,curing etc., complete complying with standard specifications.

Weathering course concrete with broken jelly 20mm size and pure slaked lime over RCC roof slab,the proportion being 32:12.5 for required depth of 80mm for giving required slope and thickness of roof on required ,well beaten with wooden beater etc.,complete.

Finishing the top of roof with one course of machine pressed tiles of size 23cmx23cmx20mm of approved quality laid in 1:3,12mm thick mixed with water proofing compound 2% by weight of cement used etc., complete with standard specification

Supply and fixing Window M.S.Grill of approved design including welding,transporatation and one coat of primer etc., complete

Supplying and fixing Teak Wood Frames for DOORS, WINDOWS, VENTILATORS and other similar joinery works with the following sizes and sections including labour charges for wrought and put up in position and also for fixing hold fast in frames and masonry etc., complete in all floors.

a) Upto 2m in Length

b)2m to 3m in Length

Supplying and fixing in position of 30mm thick Solid core flush shutters with Teak wood ply on both sides with teak wood lipping alround including cost and conveyance of all materials,Aluminium furniture fittings including labour charges for fixing in position of door shutter etc., complete.

Supply and fixing in position of UPVC ventilator of any size .The outer frame will be 62x38x2mm 21.17Kg/m and the louvers with moving arrangements will be made with Aluminium,channel of size 60x30x4mm @ 1.27kg/m with necessary glass pans for louvers 4mm thick Alulminium clips 19.05x17.27x11.05x0.075mm @0.169kg/m including all materials,labour and power consumption charges required fro fabrication if necessary chipping dismantling making hole sing RCC columns,beams or masonary whereever necessary with power drill to the extent required and make good to the original conditions.

Supplying, fabrication and fixing of 30mm thick both side pre laminated WPC door shutter with frame of required size 0.75m x 2.00m & 0.90 x 2.00m including necessary brass furniture fittings such as 125mm x 25mm brass hinges-3Nos , 200mm x 12mm brass tower bolt - 1No, 150mm x 12mm brass tower bolt - 2Nos,150mm brass handle - 2Nos, cylindrical lock - 1No, T.W lippings around the shutter etc., including cost, conveyance of all materials and labour charge for fixing complying with standard specification.

Flooring with Anti Skid ceramic tiles of approved quality, colour design and of size 30cmx30cm laid in cement mortar 1:3 (One Cement and Three Sand) 20mm thick including pointing the joints with same colour cement to the full depth of the tiles including cost and conveyance of all materials and labour etc. complete.

Dadooing the side walls with glazed wall tiles of approved quality colour, design and of size 30cm x 45cm in cement mortar 1:2 - 10mm thick and painting with white cement including finishing the joint and polishing the tiles surface glassy etc. complete

Supplying and fixing in position best quality approved make, colour glazed Earthenware wash hand basin oval shape of size 550x400mm in granite table top including cost of 15mm brass chromium plated pillar cock 32mm dia CP waste coupling with rubber and chain, 15mm dia CP angle valve, 15mm dia brass nipple, 15mm dia Nylon connections including fixing the wash in position with a pair of M.S. angle 50x50x6mm etc. Complete as per standard specification.

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting

Supplying and fixing in position Indian water closet of size 580x440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap conforming to IS 2556-Part XII with 10 lit capacity PVC flush tank and internal fittings with sand cushion and forming, flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to case iron soil pipes by dismantling brick masonary, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without quality with 'P' trap or 'S' trap conforming to IS:2556 leakage etc., complete complying with standard specifications.

Supplying and fixing in position Indian make white glazed earthernware Magnum urinal of ISI standard and best approved colour urinal of best approved quality with G.I.pipe connection of 32mm, bell mouthed, waste Pipe, 15mm. dia G.M. Gate value bring the urinal to the wall in position with necessary T.W.Plugs, clamps, shellac etc., including dismantling masonry if necessary and readoing the same to original condition fixing the 15mm. dia G.I.pipe and wheel valve. Painting the pipe with two coats of approved paint over one coat of primer and checked without any breakage complete complying with standard specification.

Supplying and fixing 50mm thick (both side polished) marble slabs for shelves (4 tier) with neat finishing. The rate inclusive of cost of slab and labour charges for fixing etc., complete as directed by the departmental officer.

Supplying and fixing of CP screw down tap heavy type 15mm dia including testing for leakage etc., complete complying with standard specification.

Supply and fixing of Health faucet of approved quality and make including fixing in position etc., complete. (Local Market rate)

Supply and fixing 4” dia PVC Nahini trap of size with C.P. Gratings 100mm x 75mm of approved quality etc. complete as directed by the Corporation Officers.

Supplying, laying and jointing of following size of CPVC pipes of approved make and ISI quality including fixing CPVC specials but excluding cost of CPVC specials,cutting, threading of pipes concealing the pipes into wall with necessary clamps and nails , dismantling the wall, laying pipes and making good the dismantled portion to original condition with necessary brick work and plastering wherever necessary etc. complete as directed by the Corporation Officers.

a) 25mm dia (1") CPVC pipe

b) 20mm dia (3/4") CPVC pipe

Supplying, laying and jointing of following size of PVC pipes of approved make and ISI quality including fixing PVC specials but excluding cost of PVC specials,cutting, threading of pipes concealing the pipes into wall with necessary clamps and nails , dismantling the wall, laying pipes and making good the dismantled portion to original condition with necessary brick work and plastering wherever necessary etc. complete as directed by the Corporation Officers.

a) 40mm dia (1½") PVC pipe

b) 50mm dia (2") PVC pipe

Supplying and fixing of 75mm dia P.V.C pipes 6Kg/SqCm of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs, PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.Above ground level upto 4m height.

Supplying and fixing of 110mm dia P.V.C pipes 6Kg/SqCm for Sanitory line of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs, PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.Above ground level upto 4m height.

Supply & fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre of pipes etc., complete.

Supply and fixing the following GI and PVC pipes and CPVC specials for pipe connection arrangements for inlet outlet sour and overflow etc., including cost of pipes specials valve labour charge fro lifting aligning ,cutting,threading,fixing and painting of GI pipe with two coats of approved quality enamel paint etc.,complete as detailed below.

25 mm Dia CPVC Elbow

25 mm Dia CPVC Tee

25 mm Dia CPVC coupling

25 mm Dia CPVC Union

20mm Dia CPVC Elbow

20mm dia CPVC Tee

20mm dia CPVC Union

20 & 15mm dia CPVC elbow

75mm dia PVC Plain elbow

75mm dia PVC Door Elbow

75mm dia PVC Door Tee

75mm dia PVC Tee

110mm dia PVC Door Tee

110mm dia PVC Bend

110mm dia PVC Cowl

110mm dia PVC door Bend

110mm dia PVC Tee

Supplying and fixing GM gate valves, GI fittings, pvc specials of various sizes of approved quality and ISI band as per standard specification

20mm dia Brass ball valve

Construction of manhole chamber of size 600x600mmx1100mm (above GL 200mm Below GL 900mm) to total height of 1100mm (ID) 200mm above ground level 900mm below ground level with a base concrete of 100mm thick 1:5:10 over a sand cushion of 100mm thick. The chamber should be constructed in brick masonry 230mm thick in CM 1:5 with stock bricks of size 9"x41/2"x3". The inner side of chamber plastrering in cm 1:5, 12mm thock, the outer chamber of wall to depth of 300mm plastered in cn 1:5, 12mm thick. The Chaber top covered with SRF cover slap 100mm thick. The rate is includuing the cost of material,Labour etc, complete.xincluding all works of earthwork,CC 1:5,10, 200mm thick,Brickwork, plastering in CM 1:5,12mm thick etc., complete

Providing Pathway hand rails using 304 grade 16 SWG SS pipes 40mm dia as verticals to height spaced at 1m centre with top railing 50mm dia and 25 mm dia pipe intermediate rigidly fixed with spacing of 0.30m centre to centre vertically in the existing concrete/brick wall structure and properly fixed including all materials and labour charges polishing transport charges etc., complete

Painting two coats with Plastic Emulsion paint of approved quality and colour including one coat of emulsion primer over new wall surfaces including cleaning and preparing the surface, scaffolding etc., complete.

Painting two coats with Elesto metric acrylic water proof Exterior Emulsion paint ( Dr.Fixit or equivalent) over one coat of primer (Prime seal of Dr. Fixit or equivalent) after cleaning the surface over old wall surfaces including scaffolding etc., complete. as per standered specification.

Painting two coats with Ready mixed synthetic enamal paint of approved quality and colour over new Iron surfaces including prepare the surfaces, cost of brushes and all materials, scaffolding etc., complete.

Providing and laying spreading and compacting graded stone aggregate to Wet Mix Macadam(WMM) specification including premixing the material with water at OMC in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in SubBase/Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material,labour charges, rentals for machinery, fuel and all other incidental charges etc., complete.

Supplying and laying of 83mm thick high strength type of interlocking using rubber mould for the paver blocks with design and approved colour and manufacture with concrete mix 1:1:2 using 10 to 12mm size HBG stone jelly, in required shapes and sizes having minimum compressive strength of 40N/m2 to be laid in flurrying bone pattern with approved non sticking surface at top. the rate is inclusive of levelling the site, providing 'M' Sand cushion 100mm thick below 6mm thick graded chips grouting and also inclusive of transportation charges, loading, unloading and labour charges for laying the paver block etc. complete complying with standard specification and as directed

Supply and erection metal framed petro reflected information signage board of high intensity grade of size 2.10m x 1.85m made with 3mm thick alco panel sheet board fixed over the metal framed M.S angle frames made with ISA 40mm x 40mm x 6mm angles for all-round and intermediate frames at a spacing of not more than 0.75m on vertical direction and 0.60m on horizontal direction including fixing of petro reflected information signage letters over the alco panel sheet board. The sign board is to be erected with two numbers of ISMC 150 x 75mm vertical poles of 5.45m height with necessary foundation concrete of C.C. 1:2:4 using 20 mm HBG Jelly to a size of 0.60m x 0.60m x 0.90m. The rate is including cost and conveyance of all materials, painting the iron works with two coats of enamel paint over one coat of primer, erection of the signage board in true alignment in the location as directed by the corporation officers complying with specification.

Supplying and fixing MS tubular square rod for the shelter arrangements using 50mm x 50mm square tube 50mm x 25mm square tube / 60mm x 60mm square tube as purling, truss, vertical as directed by the Corporation Officers.

Roofing with best quality pre coated steel sheet 20 gauge over the MS tubular section , truss including cost of J bolts, bitumen washers and cutting the sheets to required shapes if found necessary during execution etc., complete.

Painting two coats with ready mixed synthetic enamel paint over red oxide primer finished new iron grills including cleaning, preparing the surfaces, cost and coveyance of all materials etc., complete.

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade\in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator)

Supply and Run of 2 of 2.5 sq.mm.(56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour

Supply and laying of 3 -1/2 x 35 Sqmm PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and fixing of brass cable gland for 3 1/2 x 35 sqmm PVC LTUG aluminium armourd cable with earth connection

Supply and providing cable end termination of 3 1/2 x 35sqmm PVC LTUG aluminium armoured cable necessary aluminum cable sockets by crimping etc with elctrical connection complete.

Supply and fixing of horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure double door type with metal door with IP43 protection with 40A 4 pole MCB isolator as incoming and 12 Nos 6A to 32 A SP MCB as outgoing inflush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB`s should be with the ISI mark. (SD - 179)

Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 63A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection complete.

Earthing as per standard with an earth electrode of 2 meter class B GI pipe of dia not less than 32mm complete with necessary masnort work (SD - 234)

Supply and installation of 22W 4 feet LED tube light fitting with its electrical connection etc., complete.

Supply and installation of 18W 2 feet LED mirror light fitting with its electrical connection etc., complete.

Supply and installation of 15W LED Bulkhead fitting with its electrical connection etc., complete.

Supply and fixing of 8" Brisk air ventillation exhaust fan with its electrical connection to make good condition.

Supply and installation of FRP/PVC storage water tank with double flab cover of approved quality and make including conveyance and lifting to top of terrace and fixing in position etc., complete. In the tank, necessary holes to be made for inlet, outlet and over flow connections. The rate is including cost and conveyance of all materials and labour for erection etc. complete.

GST at 18%

N MUNIASAMY (BID ID -1257840)