DAY TO DAY COMPLAINTS AND COMPREHENSIVE MAINT OF B/R NATURE IN TECH AREA AND DOMESTIC AREA, AND REPAIR/MAINT OF INTERNAL WALLS INCLUDING PLASTERING, PAINTING AND ALLIED WORKS IN LIVING AREA AND BASRA AREA AT AFS HASIMARA

Amount

Taking up or down 15 mm dia steel water tubing and connection including cleaning for refixing or removal to store, complete all as specified and directed. Note: For Day to day complaints and comprehensive maint (i) Cost of labour for providing new items including replacement /Demolition/ dismantling/ taking out/down of old unserviceable item shall be deemed to be included under respective item. (ii) Cost of material shall be measured and paid separately under relevant items as given below. (iii) Supervisor will collect the Job cards of complaints from the complaint cell on every oficial working days and complete the same and feed back given to the complaint cell on same day. (iv) Each complaint must be completed within 48 hrs from the date of job cards.The complaints which will not be rectified within specified time of 48 hrs, the recovery of Rs. 250/- shall be made for each complaints from amount due to the contractor.

Taking up or down 20 mm dia steel tubing and connection including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down 25 mm dia steel tubing and connection including cleaning for refixing or removal to store, complete all as specified and directed.

S&F steel water tubes, galvanised 15 mm bore, medium grade with all fittings and fixed complete to wall and ceiling or laid in floors etc, complete all as specified and directed.

S&F steel tubes, galvanised 20 mm bore, medium grade with all fittings and fixed complete to wall and ceiling or laid in floors etc, complete all as specified and directed. .

S&F steel tubes, galvanised 25 mm bore, medium grade with all fittings and fixed complete to wall and ceiling or laid in floors etc, complete all as specified and directed.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) to facings brick wall where required,exc 10cm but not exc 20cm girth, complete all as specified and directed.

Dismantling water tanks exc 500 and not exc 1000 ltr cap and removing to store, complete all as specified and directed.

S&F 500 litres capacity rotational moulded polythene water storage tanks (cylindrical vertical, with closed top), hoisted and fixed in position as specified in SSR Part I, complete all as specified and directed.

S&F 1000 litres capacity rotational moulded polythene water storage tanks (cylindrical vertical, with closed top), hoisted and fixed in position as specified in SSR Part I, complete all as specified and directed.

S&F in repair 20 mm bore ball brass valves high pressure, with polythene float & fly nuts complete, screwed for iron pipe or brass ferrule, complete all as specified and directed.

S&F in repair gun metal gate valve 20 mm bore dia with iron wheel screwed both ends for iron pipes, complete all as specified and directed.

S&F in repair 15 mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot or Cold" with long screwed shanks and fly nuts, screwed for iron pipe etc, complete all as specified and directed.

S&F in repairs 15 mm bore, stop valves, cast copper alloy, chromium plated with long shank and cup (concealed type ) angular, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.

S&F in repairs, 15 mm bore, cast copper alloy, chromium plated bib taps with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair waste coupling brass, chromium plated for wash hand basin with long screwed shanks and fly nuts fixed in repair 32mm bore, complete all as specified and directed.

S&F waste fittings 32mm bore, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed anks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.

S&F in repair Grating doom 150mm dia of PTMT (Minimum weight 100gms), complete all as specified and directed.

S&F in repair for 15mm stop valve/ angular stop cock fancy type chromium plated alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or union, complete all as specified and directed.

S&F in repair for PVC connections pipe 15mm size, with PTMT nuts of length 600mm, complete all as specified and directed.

S&F in repairs 10 litres capacity PVC valve less syphonic action type, flushing cistern, low level with inlet ball valve and bracket etc, complete all as specified and directed including taking out old one, complete all as specified and directed.

S&F in repairs, Vitreous China wash down water closet pan and trap EWC (pedestal pattern), white with plastic seat cover including connections to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, fixing bolt etc. and making good damaged portion, complete all as specified and directed.

S&F in repairs fancy type 15mm bore cast copper alloy chromium plated health fecuit with 1m easy flex tube for EWC, complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as directed and specified.

S&F in repair for plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device, complete all as specified and directed.

S&F brass CP mixer 15mm bore for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

S & F in repair 15mm bore CP central hole basin mixer. Make:- Jaquar Model No-FRL5167NB or equivalent of make CERA, complete all as specified and directed.

S& F in repair Grating doom 150 mm dia PTMT, complete all as specified and directed

S&F in repair bib tap15 mm standard of PTMT any colour screwed for iron pipe (Minimum weight 15mm-90 gms), complete all as specified and directed.

S&F in repair 15 mm stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms), complete all as specified and directed.

S&F in repair 15 mm Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms), complete all as specified and directed.

S&F in repair 15 mm pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms, complete all as specified and directed.

S&F in repair 15 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms, complete all as specified and directed.

S&F in repair Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 190gms), complete all as specified and directed.

S&F in repair soap dish, vitreous China white, approximate size 160x 160x90mm, complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm siz,e complete all as specified and directed.

S&F Vitreous China urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe), complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue anodized, with hard drawn steel spring fixed in floor overall length of cover plate 150mm, complete all as specified and directed.

S&F in repair aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutter of 851 to 1000mm in width & of weight between 61 to 81 kg, complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminum alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty, complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutters of any description not exceeding 1 Sqm each, complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutters of any description exceeding 1 Sqm each & n.exc 2 Sqm each, complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutters of any description exc 2 Sqm each, complete all as specified and directed.

Taking down, resecuring or easing and adjusting and refixing in same opening shutters of any description not exceeding 1 Sqm each, complete all as specified and directed.

Taking down, resecuring or easing and adjusting and refixing in same openingshutters of any description exceeding 1 Sqm each & n.exc 2 Sqm each, complete all as specified and directed.

Taking down, resecuring or easing and adjusting and refixing in same opening shutters of any description exc 2 Sqm each, complete all as specified and directed.

Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame), complete all as specified and directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing, complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. (Make : Duroplast / RAJSHREE), complete all as specified and directed.

S&F MS holdfast made up of FI 25 x 3 mm conforming to Fe-410-0 or Fe-310-0, complete all as specified and directed.

S&F 150mm long aluminium anodized barrel tower bolts of extruded section, complete all as specified and directed.

S&F 75mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised type - C-21, complete all as specified and directed.

S&F 150mm long aluminium handles, cast type, anodised, complete all as specified and directed.

S&F aluminium alloy,anodised,sliding door bolt 250mm long with hasp, staple(bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloyall, complete all as specified and directed.

S&F aluminium Mortice lock, vertical type, size 100 mm ( 2 levers ), complete all as specified and directed.

S&F aluminium Mortice lock, vertical type, size 65 mm ( 2 levers ) complete all as specified and directed.

S&F aluminium Mortice lock, vertical type, size 75mm ( 2 levers ), complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm as in doors with necessary nails and fillets, complete all as specified and directed. .

Hacking out old broken glass (any thickness,size,quality or description) from wooden frames or stone concrete or brick surrounds,glazed with putty or fixed with beads, complete all as specified and directed. .

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed. .

S&F 4mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 Sqm each pane, complete all as specified and directed.

M & L in repairs, for 6.3 mm Sheet glass, ordinary quality, in squares exc 0.5 sq. m each pane, complete all as specified and directed.

S&F in repair Harrison rails of anodised aluminium alloy chromium plated with fixing brackets, stops, rollers, etc, complete all as specified and directed. .

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. .

M&L for Rendering 15mm thick on fair faces/other than fair faces of brick work/concrete surfaces in any position in CM (1:4) finishing surface even smooth w/o using extra cement, complete all as specified and directed.

Preparation of new surfaces of walls plastered and applying two coats of oil bound distemper on wall.over a coat of primer over 2 to 3 mm thick wall care putty, complete all as specified and directed.

Dismentling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semi corrugated etc.) of any thickness including ridges hips valleys as in roof covering, complete all as specified and directed. .

M&L 6mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/ Aluminium framework with screws, 60x60 cm in size, fixed with nails to timber framework or with staples on snap grid, complete all as specified and directed.

M&L for non asbestos, fibre reinforced designer ceiling board , 4mm thick (610mm X 610mm) with hot-dip GI heavy duty suspended ceiling grid system T-2430 with GI frame work for ceam;less ceilling comprising of GI perimeter channel, unequal flanges and web etc of suitable size suspended from soffit at approx 900mm center with GIO cleat and steel expansion fastrener with and incl ceilling section incl hangers 6mm dia GI fixed to roof by means of ceilling cleats made out of GI flat all as per manufacture's instructions, complete all as specified and directed.

S &F in repair PVC cover/lid for PVC over head water tank suitable for capacity of 500 ltrs and upto 1000 ltrs capacity, complete all as specified and directed.

S&F in repair wash hand basin 550 x 400mm, vitreous china (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, complete all as specified and directed.

S&F in repair coloured toilet paper holder, vitreous China, box type, complete all as specified and directed

Material and labour for 75 mm thick plain cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone ggregate) as in sub floor including, complete all as specified and directed.

S&F chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with gray pigments cement and pigments laid over & including 20mm thick screed bed in cement mortar (1:6), complete all as specified and directed. .

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing rubbish off the premises, complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed. .

S & F in repair 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall, complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.

S & F in repair 110 mm PVC (SWR) bends any radius with access door complete all as specified and directed.

S & F in repair 15 mm bore PVC connection with brass coupling nuts of size 15 mm dia and 450 mm long complete all as specified and directed. .

Repair to old damage rusted hinges of steel window inclunding supply of new hinge( any type), neccesary scafolding/ supports and touch-up painting to repaired portion, complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S &F in repair steel rolling shutters (thickness of laths in 1.25 mm) but gear operated type with chain wheel and hand chain, complete all as specified and directed.

S &F for safety lever locks mild steel with 4 levers for rolling shutters, complete all as specified and directed. .

S &F for ball bearing for rolling shutters, complete all as specified and directed. .

M & L for Preparing of newly steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and directed .

Demolition of Brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed. .

M&L for brickwork with subclass 'B' bricks, straight or curved on plane surface exc. 6m mean radius built in cement mortar (1:6), complete all as specified and directed. .

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 5mm thick on ceiling and sofits of staircase in cement mortar (1:3) or concrete surface finished even and smooth, complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall and applying two coats of oil emulsion distemper over one coat of wall primer, complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall and applying two coats of oil emulsion distemper over one coat of 1 mm thick wall care putty, complete all as specified and directed.

M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed. .

M&L for complete removal of the existing old treatment on walls and applying two coats of distemper oil emulsion over a coat of of 2 mm thick wall care putty on plastered surfaces preparetory to distemper including preparation of surfaces, complete all as specified and directed.

M&L for two coats of cement base paint over a coat of wall primer wash over old plastered surface including preparationof surface, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes Cement plaster (1:6), complete all as specified and directed.

M&L for virified ceramic tiles flooring, light shade, 10mm thick (square/rectangular) polished, area of each tile n.exc 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tille, complete all as specified and directed. Note: An amount of Rs.31017.00 on account of credit schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S I P GROUP

M/S ASHOK ENTERPRISE

M/S P.K.AGARWALA

CONSTRUCTION SHELTER

M/S DEY ENTERPRISE

M/S ANIL KUMAR BAUL

MAJUMDER ENTERPRISE