Wiring, lighting and power supply through AB cable to newly installed RFID Porta cabin at Amarpali CISF check post near 4215 sub-station (SILO) and CHP CISF check post near WB No- 01 and 02 under CHP-CPP, Piparwar.

Amount

Supply of P.C.C Pole size (Length) 9 mmtr.

Erection of RCC/PCC pole of following length in brick ballast and ramming the foundation ,finishing with 150 mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required.Above 8.0 metre and upto 11.0 metre.

Supplying and erection of stay set complete (galvanised)with 19/20 mm diaX 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble,stay clamps,turnbuckle (20mmX60cm), 7/4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1cement:3 coarses and:6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Supplying of channel iron 75 mm X 40 mm X 6mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps,bolts,nuts and washer etc including drilling of holes for insulator pins etc (as per drawing)and painting with primer and finished paint as required.

Providing and Laying /Erection of Aerial Bunch Cable (3 x35 + 1 x 16 +1 x 25 Sq mm) (Gem portal Excl. GST rate + CLC rate )- Analysis-1

Providing & fixing of suspension Clamp for Stringing of Cable .On top of Pole. (Gem portal Exclu. GST rate + CLC rate )- Analysis-2

Astronomical Timer for street light control

LED Flood light 300 Watt. (Note:- 2 year warranty is Applicable on Led Light)

Distribution Box (SMDB BOX).

Earthing with G.I.earth plate 600 mm X 600 mm X 6 mm thick including accessories,and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc.with charcoal/coke and salt as required.

Providing and fixing following rating and breaking capacity and pole MCCB with thermo magnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel,making connections ,etc.as required. 200 A,36KA,FP MCCB.

Wiring for light point /exhaust fan point/ with 1.5 Sq. mm FRLS PVC insulated copper single core cable in surface/recessed medium class PVC conduit with Piano type switch, phenolic laminated sheet suitable size M.S /PVC box and earthing the point with 1.5Sq mm FRLS PVC insulated copper single core cable etc. Required.

Supplying and fixing 15/16 Amp Switch

Supplying and fixing 6pin 15/16 Amp Socket outlet

Supplying and fixing 5/6 Amp Switch

Supplying and fixing 3 pin 5/6 A socket outlet.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10kA,"C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MOBDB complete with connections ,testing and commissioning etc.as required.Single pole and neutral.

Supplying and fixing following way,single pole and neutral,sheet steel,MCB distribution board,240V,on surface/recess,complete with tinned copper bus bar,neutral busbar, earthbar,dinbar,inter connections,powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).

Supplying and drawing following sizes of FRLS PVC insulated copper conductor,single core cable in the existing surface/recessed steel/PVC conduit as required. 2 x 4 sq. mm

Supplying and fixing following rating,double pole,240V,isolator in the existing MOB DB complete with connections,testing and commissioning etc. as required.63A

Installation of exhaust fan in the existing opening,including making good the damage, connection, testing, commissioning etc. as required.Upto 450 mm sweep.

Supplying LED Bulkhead Light .

Supplying Tube light Retrofit type 20 Watt

Supplying LAMP,220-240VAC,20W,LED pin type

Supplying 400 millimeter Bracket mounted fan for wall mounting.

Supplying Exhaust fan 300 mm

Total impact of GST for the purpose of CTC

B.K.ELECTRICAL (BID ID -1133174)