CERTAIN MISC REPAIR OF B/R ITEMS OF MD AND OTM ACCN AT COOCH BEHAR UNDER AGE B/R-II OFGE (S) BINNAGURI

Amount

Dismantling floor, hearth or wall tilling including cement mortar bedding and rubbish off the premises complete all as specified and directed.

S&F joint free non skid Ceramic tiles, coloured, superior quality 7 to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F glazed ceramic tiles, coloured superior quality 300x450x 6 to 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in vertical surface including 10mm thick rendering in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick work wall including racking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M&L rendering 15 mm thick in cm 1:6 on fair faces of brick work or concrete surfaces finishing surfaces even and smooth without using extra cement , complete all as specified and as directed.

M&L for 5mm thick rendering on fair faces of concrete such as ceiling, in CM 1:3 finished even and smooth with out using extra cement complete all as specified and directed.

M&L for rendering 20mm thick( 10mm backing and 5mm floating coat) in CM 1:4 mixed with integral water proofing compound @ 3% by weight of cement on floating coat as in other than fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed. NOTE: WPC shall be measured and paid separately under respctive Item of schedule.

Supply only integral water proofing compound complete all as specified.

M&L for preparation of newly plastered surfaces of ceiling and applying three coat of white wash on ceiling surfaces complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coat of white wash on wall surfaces complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of colour wash over one coat of white wash on wall surfaces complete all as specified and directed.

S&F in repair 18/19mm thick prelaminated medium density fibre board,one side decorative lamination and other side with bleaching white,interior grade,fixed with adhesive as in cup board shutters/ shelves and pelmets etc., fixed with screw/ nails to timber frame work including 4mm thick teak wood leaping alround complete all as specified and directed.

S&F in repair 12mm thick particle board,medium density,flat pressed,three layertype with BWR type adhessive,fixed with screws to timber frame work including 4 mm thick Teakwood leaping alround as in cup board shelves and shutters complete all as specified and directed.

Restraining and rescuring of aluminium section of shutter and frame, including proper adjustment of floor spring, and fixing of new rubber gasket etc of existing door for proper functioning of each shutter n exc 2 sqm complete all as specified and as specified.

S&F in repair double action floor spring hydraulically regulated made up of aluminium alloy sheet foundation box with stainless steel cover fixed to Aluminium doors complete all as specified and directed. Make Sandhu/Samrat

S&F in repair of 40mm dia brass polished cup board Knobs fixed with nickel Cadmium screws of required sizes complete all as specified and directed.

S&F in repair aluminium (extruded section body) door closer hydraulically, regulated, designation No 3, universal type, suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repair MS bends, hold fast or small articles confirming to Gde-290-E 165 complete all as specified and directed.

Supply and fixing in replacement Harrison rail (curtain rails), 25 mm dia, mild steel chromium plated with fixing bracket of size and pattern as per existing complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and as directed..

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

M&L for 3mm thick sheet glass Figured glass, pin head type and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified and as directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area n.exc 1.50 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exc 1.50 Sqm but n. exc 4sqm each complete all as specified and directed.

S&F pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. NOTE: The quoted unit rate under this item shall deemed to be include one shop coat of primer.

S&F pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. NOTE: The quoted unit rate under this item shall deemed to be include one shop coat of primer.

S&F for 2nd class hardwood (SAL) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

S&F 35mm thick factory made, 2nd class hard wood, plain framed, panelled shutter ( two panel) with lock rail and panel of Timber flat on both faces, ( feather edged)the size of rail and styles as per IS: 1003 ( Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 2nd class hardwood factory made kiln seasoned and chemically pressure treated door, 35 mm thick, glazed and skeleton shutters, open rebated and prepated to receive glass gauze etc (with sash bars) edges of framing plain, chamfered or rounded materials and revated sash bars any number , edges of framing plain chemfered or rounded fitted with cut and mitred beads for securing glass in door etc or provided with styles and rails as specified in SSR part 1 section 8, clause 8.23 (a) complete all as specified and directed .

S&F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanised wire staples, complete all as specified.

S&F factory made Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, supplying and fixing in opening with fittings as per specification & drawing complete.

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rails lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement and supply & fixing in the frame at site as per specification and shown on drawing SSR Part-II (2004) all as specified and directed.

S&F of cold rolled mild steel butt hinges medium weight of size 100mm long complete all as specified and directed.

S&F of cold rolled mild steel butt hinges medium weight of size 75mm long complete all as specified and directed.

S&F aluminium anodised barrel Tower Bolts of extruded section 150 mm long fixed with screws.complete all as specified and directed.

S&F aluminium anodised barrel Tower Bolts of extruded section 100 mm long fixed with screws.complete all as specified and directed.

S&F in repair 125 mm long, aluminium, anodised, door handles of extruded section complete all as specified directed.

S&F aluminium alloy, anodised, sliding door bolt 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed.

S&F aluminium alloy, anodised, sliding door bolt 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed.

M&L for preparation of newly wood or wood base materials of any description, not otherwise described over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of Pink primer complete all as specified and directed.

Taking out unserviceable steel work such as Steel windows/ventilators with guard bar and other section by cutting in Brick wall etc and removing from site of work complete all as specified and as directed.

S&F factory made Z section steel window with side hung shutter frame including projecting/ box type hinge with steel handle and steel peg stay, ms tower bolt etc. complete with glazing bars , dovetailed or welded including a shop coat Red Oxide priming complete all as specified and directed.

S&F factory made Z section steel window fixed type incl hinges with glazing bars including a shop coat Red Oxide priming , complete all as specified and directed.

S&F factory made Z section steel ventilator with top hung shutter incl hinges, steel peg stay, with glazing bars including a shop coat Red Oxide priming complete all as specified and directed.

M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth including preparation of steel surfaces complete all as specified and directed.

M&L applying one coat of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth including preparation of old steel surfaces complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using (20mm graded stone aggregate) as in bed blocks for hold fast ,gap between windows,cills,etc complete all as specified & directed.

SCHEDULE OF CREDIT Rate quoted by the Tenderer for this schedule should not be less than rate assessed by the department shown on estimated rate column for the respective items.

Old unserviceable glass panes of any discription.

Old unserviceable chowkhats or frames with shutters area n.exc 1.50 sqm each including iron mongery obtained from dismantling.

Old unserviceable chowkhats or frames with shutters area exc 1.50 sqm and n. exc 4 sqm each including iron mongery obtained from dismantling.

Old unserviceable galvanised MS wire cloth any size and thickness.

Old unserviceable aluminium door closer.

Old unserviceable knob.

Old unserviceable aluminium curtain rod.

Old unserviceable partical board.

Old unserviceable steel window.

Old unserviceable guard bar window.

SANKAR SINHA

R K AGARWAL

M/s PATEL ENGINEERING

ANUP ENGINEERING WORKS

M/S NIKITA ENGINEERING CO

M/S VIRENDRA KUMAR SINGH