Providing Ornamental Arch, Roof and Partition arrangements (Queue, Paking-Shed) for Poombuhar Shipping Corporations Limited at Kanniyakumari in Kanniyakumari District.

Amount

Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Cement Concrete 1:5:10 (One cement, Five crushed stone sand and Ten hard broken stone) using 40 mm gauge hard broken jelly for foundation including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers

Cement Concrete 1:5:10 (One cement, Five crushed stone sand and Ten hard broken stone) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers

Brick work using Country Bricks of size 8-3/4" x 4-1/4" X2-3/4" in Cement Mortar 1:5 (One cement and five crushed stone sand) including curing neat finishing, etc., complete complying with standard specifiction. For foundation & basement

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)

For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 400 kg/m3 and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc.

and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

In Foundation and Basement

In Ground floor (upto 4.50m feet)

In First floor (Above 4.50m feet)

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Supplying and filling in foundation, basement, etc with filling stone dust in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Paving the floor with Special type anti-skid tiles of size 600mmx600mmx10mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Supplying and fixing GI pipe handrails using 50mm dia GI pipe at a height of 800mm and 900mm from floor level with 25mm thick MS square rods as balusters embedded in the concrete and welded with pipe at 60cm centre to centre including cutting, welding, bending and fixing charges and applying one coat of red oxide primer for MS members as directed by the departmental officers

Supplying and fixing of G.I tubular pipe 4" X 2" having thickness of 2 mm which include cost of transportation, materials, labour charges for fabrication, welding charges, erection charges etc., complete. complying with standard specification and as directed by the departmental officers.

Supplying and fixing of G.I tubular pipe 1" X 1" having thickness of 1.6 mm which include cost of transportation, materials, labour charges for fabrication, welding charges, erection charges etc., complete. complying with standard specification and as directed by the departmental officers.

Supplying and fixing of G.I tubular pipe 40X20mm having thickness of 1.60 mm which include cost of transportation, materials, labour charges for fabrication, welding charges, erection charges etc., complete. complying with standard specification and as directed by the departmental officers.

Supplying and fixing of concrete tiles 1 1/2" X 1 1/4" which include cost of transportation, materials, labour charges for fabrication, welding charges, erection charges etc., complete. complying with standard specification and as directed by the departmental officers.

Supplying and fixing of flat clay tiles of size 1' X 3/4' which include cost of transportation, materials, labour charges for fabrication, welding charges, erection charges etc., complete. complying with standard specification and as directed by the departmental officers.

Supplying and fixing of UPVC rain Gutter pipe supported by G.I pipe having 45 X 25 mm throughout and PVC rain water pipe cut of size 6.5" at top & 6" at bottom at edges.which include cost of transportation, materials, labour charges for fabrication, welding charges, erection charges etc., complete. complying with standard specification and as directed by the departmental officers.

Supplying and fixing of Thoranam ( Ornamental type) which include cost of transportation, materials, labour charges for fabrication, welding charges, erection charges etc., complete. complying with standard specification and as directed by the departmental officers.

Supplying and fixing of ridge tiles at centre portion size which include cost of transportation, materials, labour charges for fabrication, welding charges, erection charges etc., complete. complying with standard specification and as directed by the departmental officers.

Supplying and fixing of barge tiles ( L- shape )at centre portion size which include cost of transportation, materials, labour charges for fabrication, welding charges, erection charges etc., complete. complying with standard specification and as directed by the departmental officers.

Painting two coats of zinc primer and also applying of synthetic enamel paint over primeretc., complete. complying with standard specification and as directed by the departmental officers.

painting two coats of matt finish on flat clay tiles complete. complying with standard specification and as directed by the departmental officers.

Supplying and fixing in position best approved of BIS quality 110mm dia PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.

110mm dia -pipe

Supplying and fixing of G.I pipe of following size having thickness of 3 mm which include cost of transportation, materials, labour charges for fabrication, welding charges, erection charges etc., complete. complying with standard specification and as directed by the departmental officers.

100mm dia pipe

125mm dia pipe

Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer

Supplying and fixing Ornamental Stainless steel gate of size 6.50 x 2.40 using Stainless steel pipe of outer frame of size 2''x2'' and inner horizontal arrangemnets with size 2''x 1'' and with ornamental compressed wood etc complete. The rate includes cost of labour, fixing in position, welding charges, cost of transportation etc., The entire work has to be completed statisfactorily as per the directions of the Officers Concerned.

P.C. ANTHONI MARIYA GRATAS (BID ID -1089466)

NADARAJAN (BID ID -1089967)

CS CONSTRUCTION (BID ID -1090123)