VIKAS KHAND JAKHANIA KE GRAM PANCHAYAT BHUDKUDA ME AGANBADI KENDRA NIRMAN KARYA

Clearing grass & removal of rubbish up to a distance of 30 m out side the periphery of the area as per Technical Specification Clause 201. SOR Chapter No 4 SL No 1

Excavation in foundations in ordinary soil (Loamclay or Sand) including lift upto 1.5 metre and lead upto 30M and including filling watering and ramiming of excavated earth into the space between the bulding and the side of foundation trenches or into the plinth and removal and disposal of surplus earth ad directed by the Engineer-in-charge upto a distance of 30m from the foundation trenches including all T&P Phowarah and basket etc.Complete.As per S.I.No.251

Concrete with 40mm gauge brick ballast,sand of 1.25 F.M. & cement in proportion of 8:4:1 in foundation and under floors including supply of all materials,labour and Tools and Plants etc.required for proper completion of the work. As per S.I.No.275.

Class 150 brick work in 1:4 cement and c/sand mortar in foundation and plinth including supply and all materials,labour and tools and plants etc, required for proper completion of the work. 305 b

R.C.C. work with cement approved coarse sand and 20 mm gauge stone grit in the proportion of 1:1.5:3 (Cement:Coarse Sand:20 mm Stone Ballast Mortar) in lintels of door and window excluding supply of reinforcement and its bending butincluding its fixing and binding the same with 24 B.W.G.G.I.binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour andT&P etc. required for proper completion of work. binded wire cost being included in the item as per SI-284

M-150 brick work in 1:4 cement and course sand mortar in super structure for One brick wall thickness including supply of all materials, labour, tools and plants etc as per Si no 305 +309+310

12mm thick plaster with 1:3 cement & C/sand minimum thickness not to be less than 10 mm Over root I/C supply of all materials labour and T & P etc required for proper completion of work. SI No. 583

RCC work with cement, C/S & 2 cm gauge S/B 1:11/2:3 in Column and Beam, excluding S/O reinforcement and its bending but I/C its fixing and binding the same with 24 BWG GI binding wire and I/C necessary centring & shuttering etc.& also I/C S/O all materials, completion of work. SI No 288(b)

RCC work with cement, C/S & 2 cm S/B 1:11/2:3 in Slab work excluding S/O reinforcement & its bending but I/C its fixing & binding the same with 24 BWG GI binding wire & I/C necessary centring & shuttering etc. & also I/C S/O all materials, complete of work. SI No 284(b)

MS or iron in plain work such as inreinforced conc. work (when not included in overall rates) wrought to required shape as necessary I/C bending for proper completion of the work & supply of steel its wastage .Bend hooks & authorized overlapping shall be measured. SI No 504

Fixing of steel or wooden chaukhat in position. Chapter No 10 Sr. No 9 NS 4 Door (a)

Window (b)

Ventilator (c)

12mm thick plaster with 1:4 cement & F/sand of 1.25 FM minimum thickness not to be less than 10 mm I/C supply of all materials labour and T & P etc required for proper completion of work. SI No. 584

12 mm thick plaster over rough face of one brick wall with 1:4 cement & F/sand of 1.25 FM minimum thickness not to be less than 10 mm I/C supply of all materials labour and T&P etc required for proper completion of work. SI No. (584+596)

Making grooves 10 to 12mm wide x 8 mm deep in plaster of wall or in ceiling vertically or horizontally as required complete of work. SI No 598

Applying Wall Putty two coats to give an even shade I/C S/O all materials labour, T&P etc required for proper complete of the work. SI No 660+661

Finishing walls with Cement Primer of approved make & quality on new work with two coat to give an even shade I/C S/O all materials labour, T&P etc required for proper complete of the work.

Finishing walls with Plastic paint Emsulion of approved make & quality on new work with two coat to give an even shade I/C S/O all materials labour, T&P etc required for proper complete of the work. SI No 660

Painting or varnishing new iron work in small areas or new wood work with one coat (up to one sqm) of ready mixed priming paint & two coat of approved superior quality ready mix paint of clear synthetic varnish I/C S/O all materials labour, T&P etc. completion of the work. SI No (641+642)

25mm thick 1:2:4 plainC.C.floor with cement approved coarse sand and 20mm graded approvered stone ballast including .S/o all materials with completion of work as per Si no 601 (a)

Providing & Fixing Vitirified floor tiles(DOUBLE CHARGE) such as Kajaria,Somany, or equivalent tiles of appropriate size 600 x 600 mm with 1:3 cement and approved corase sand mortar inc. all etc.

Providing and Laying rectified glazed ceremic floor tiles 300x300mm or more size (thickness specified by approved make in colors) of first qulity confirming to IS 15622 of approved make in colors & shade laid on 20mm thick cement mortar 1:4 (1cement 4 coarse sand) including grouting the joints with white cement and matching pigments for 1 Sqm. of the work as CPWD 11.39

Wiring Point for light with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable in PVC Conduit on surface, complete with 14 WSGGI earth continuity wire, GP Box, Piano type switch and celling rose/Angle/batten holder on 3mm thick fhenolic laminated backelite sheet etc complete in all respect S.I.No. 138 (C) (OVER ALL RATE)

Wiring Point for Fan Piont with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable in PVC Conduit on surface, complete with 14 WSGGI earth continuity wire, GP Box, Piano type switch and celling rose/Angle/batten holder on 3mm thick fhenolic laminated backelite sheet etc complete in all respect S.I.No. 140 (C) (OVER ALL RATE)

Wiring Point for Plug with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable in PVC Conduit on surface, complete with 14 WSGGI earth continuity wire, GP Box, Piano type switch and celling rose/Angle/batten holder on 3mm thick fhenolic laminated backelite sheet etc complete in all respect S.I.No. 141 (C) (OVER ALL RATE)

Supply and fixing of Power pluge with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. Box of 175mmx100mmx50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. . 1139 (OVER ALL RATE)

Supply and Wiring of submain with 2 No 2.5 sq.mm. Multistarand copper conductor cable as earth continuity wire drawn in 20mm Dia PVC conduit S.I.No. 211 © (OVER ALL RATE)

Construction of recess of 480mx480mmx200mm size for fixing of main board, distribution boards all sizes including cutting of brick work, providing lintel of suitable size and thickness, plastering etc. with supply of all materails labour T&P for proper completion of work. S.I.No. 1141 (A) (OVER ALL RATE)

Supply and fixing of Surface/flush mounting 4 ways SPN distribution board without MCB complete in all respect, as directed at site Engineer-in-charge. S.I.No. 1022 (CAT A) (OVER ALL RATE)

Supply and fixing of 6 Amp to 32 Amp. DP MCB (10 KA) C Curve. CAT B. SI.No. 1009 (OVER ALL RATE)

Supply and fixing of recess/surface mounting round 6 watt to 8 watt, cut out min 125mm, height min 40mm, LED down lighter having powder coated die castaluminium housing with heat sink, diffuser/Reflector and driver set, suitable for 24Hr Continuous Operation, completion in all respect. S.I.No 1401 (CAT-A). 540-720 System lumens, 2 year warranty (OVER ALL RATE)

Supply and burying of 600mmx3mm copper plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG copper wire in 15mm dia G.I. pipe up up to switch board (from appron to switch board the cost of G.I. pipe and copper wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcol/coke and salt at least 150mm thick alround etc. complete in all respect. S.I.No. 704 (OVER ALL RATE)

Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other materails required for proper completion of the work as directed at site. S.I.No.721 (OVER ALL RATE)

Supply of Ceiling Fan with Fan Morter of A.C. Permanent Insulation, capacitor rating conforming BEE 5 Star rating and IS:374/79 and also comly with IS:1709/1984 with latest amendment. The rated voltage 220/240 volts, 50Hz, 1-ph AC The fan assemble should consists of down rod blades, shackle canpoies etc and double ball bearing system. Swip. S.I.No. 1501 (1) BEE 5 Star rated-1200mm sweep. (OVER ALL RATE)

Supply and fixing of water closet squatting pan (Anglo Indian W.C. Pan) with 100mm sand cast iron P or S trap. 10 litre Low level white PVC flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming To IS : 7231 with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. S.I.No. 17.1 (OVER ALL RATE)

Providing and fixing white vetreose china flat back or wall cornar type lipped front Urinal basin of 430x260x350 mm and 340x410x265mm sizes respectivaly with automatic flushing cistern with standard flush pipe and CP brass spreaders with brass unions and GI clamps complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required. Range of four Urinal basins with 10 litre white PVC automatic flushing cistern.) DAR 17.4 (OVER ALL RATE)

Providing and fixing white vitreous china wash basin size 550x400mm with C.I. brackets,15mm C.P. brass pillar traps,32mm C.P. brass waste of standard pattern,i/c all fitting and fixtures completed i/c cutting and making good the walls and floors wherever required. DAR. 17.7 (OVER ALL RATE)

Supply of Steel Sink without drainage board 610x510x200mm chapter 1 S.N. 41(A) (OVER ALL RATE)

Providing and fixing of chlorinated polyvinyI chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fitting with one step CPVC solvent cement and the cost of cutting chaese and making good the samne including testing of joints complete as per direction of Engineer-in-charge. concealed work, including cutting chases and making good the walls etc. DAR 18.8 (15mm Dia) (OVER ALL RATE)

Providing and fixing of chlorinated polyvinyI chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fitting with one step CPVC solvent cement and the cost of cutting chaese and making good the samne including testing of joints complete as per direction of Engineer-in-charge. concealed work, including cutting chases and making good the walls etc. DAR 18.8 (25mm Dia) (OVER ALL RATE)

Providing and fixing gun metal gate valve with CI wheel of approved quality( Screwed end) S.I.No. 18.17 (OVER ALL RATE) 20mm nominal bore.

Providing and fixing of C.P. Brass Bib Cock of approved quality conforming to IS:8931.DAR 18.49 (OVER ALL RATE)

Providing and fixing of C.P. Brass Stop Cock (concealed) of Standard design and of approved quality conforming to IS:8931.DAR 18.52 (OVER ALL RATE)

Supply and fixing of 450mm Long PVC Conaction with two brass unit 20 MM NOMINAL BORE as per DSR 18.21.2.2 (OVER ALL RATE)

Supply and fixing of PVC Waste Pipe 32 mm as per DSR 17.28.1.1 (OVER ALL RATE)

Providing and Placing on terrance (at all floor levals) Polyethylene water storage tank, IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. S.I.No. 18.48 (OVER ALL RATE)

Installation India-Marka-2 Hand pump at site Including boaring as per jal nigam specification and also including 1.00 HP Submerssible Pump with Panal Board Steel Wire Etc. complete. (Only For Estimating Purpose)

Collection of following material i/c cartage upto site, loading, unloading and proper stacking at site and also i/c G.S.T. in all Item 20 MM DALA GRITE (R.M.R.)

Coarse Sand (R.M.R.)

M-150 Class bricks S.I.NO. 1(a)

Cement in 50 kg back S.I.NO. 5(a)

Supply of wall Putty S.I.NO. 37

Supply of Metal/Wood Primer S.I.NO. 18 (ii)

Supply of Mild Steel/M.S. Bar (Sail)

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners,all necessary fittings complete, including applying a priming coat of approved steel primer.As Per DSR Code 10.5.2Using flats 30x6mm for diagonal braces and central cross piece. D.S.R. 10.5.2

Supply of M.S. Binding Wire S.I.No. 4 (b)

Supply of White Cement (J.K. or Birala Brand) S.I.NO. 5(c)

Fine Sand (R.M.R.) F.M 1.25

40 mm gauge B/B S.I.NO. 2(a)

Supply of Mild Steel/M.S. Bar (Sail)

Earth work in cutting or in embankment in ordinary soil. Excavation to be done in the form of regular pits not exceeding 1/2 meter (20cm") in depth and earth work in embankment to be done in 20cm (8") layers, including ramming and dressing the surface upto required level and slope and including 1.5m (5") lift and 30m. (100") lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks within 30m (100"). distance as direction by the E/I. (as per UP PWD Sl. No. 253). 1km Cartage

Fabrication & supply of T-iron 40x40x6mm door/window chaukhat frame I/C cost of steel, all carriage welding cutting, labour, grinding smooth finishing as required proper completion of the work. Chapter No 10 Sr. No 7 NS 1

Provinding and fixing of box type fan hooks (Min 10 cm. dia) with & including fixing of 12mm dia plain bar plain bar in position. S.I.No. 11 NBO 11.22

Rectified floor tiles size 300 x 300 mm

90 MM dia PVC Pipe S.I.NO. 32

Supply of Cement Primer of Berger or equivalent Asian/berger make S.I.NO. 18 (G) i

Supply of Enamal Paint (Synthetic) Asian /berger make S.I.NO. 18 (e) i

Add Scafolding, centering and TMP shuttering for item brick work, RCC work, Plaster and Painting work. (Only For Estimating Purpose)

Vitirified floor tiles size 600 x 600 mm

Supply of Plastic emulsion paints 1st quality Narolac/Berger/Asian or equivalent. S.I.No. 19 (a)

Supply of fixing sign Board

Lettering and Painting etc.