WIDENING OF CERTAIN ROADS NEAR COMD OFFRS MESS AND COMD SIG REGT AT JAIPUR MIL STN

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil for road to required slope gradient, camber etc complete all as specified and directed.

Add to (or deduct from) above item for every 3cm or part thereof above or below 15cm average depth. (unit : Sqm)

Excavating over areas, not exceeding 1.5m deep and getting out in soft loose soil etc, complete all as specified and directed.

Removing excavated material n exc 50m and deposting where directed at a level n exc 1.5m above the starting point etc complete all as specified and directed.

M&L for Soling or sub base of 200mm spreading thickness with broken boulders or quarried stone,granite filled surface formed and rolled consolidated to required gradient and camber etc complete all as specified and directed

M&L for 150mm thick (compacted thickness) WBM, with coarse aggregate of grading 2 (63 to 40mm size) or of grading 3 (50 to 20 mm size) spread, rolled and consolidated to gradient and camber required in two layer with lime stone, sand stone, flint or quartziteall as specified and directed by Enigineer-in-charge.

M & L for Continous Brick edging with width equal to the depth of the brick, laid dry, on edge with burnt clay bricks of sub class B etc complete all as specified and directed.

M & L for preparing of existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with machenical blower and gunny bags to remove all loose dirt etc and applying evenly a tack coat with bituminous prime using paving bitumen paving(VG-30) grade 5Kg/10Sqm on road surface by mechnical sprayer complete all as specified and directed

Preparing surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc on unsurfaced WBM etc complete all as specified and directed.

M&L for premix bituminous macadam mixed laid with mechanical paver and 8 to 12 tonne power roller and compacted to required gradient and camber in any thickness using paving bitumen 4% binder (viscosity grade VG-30) contents all as specified and directed. NOTE:- (i) Work shall be executed as per designed mix (job mix formula) approved by GE. (ii) If the bitumen content as per design mix found to be less than 4%, it shall be recovered at the rate of Rs 50/- per Kg for short of bitumen. If bitumen content found to be more than 4% as per design mix same shall be provided without any extra cost to the Govt.

M & L for using appliying evenly a prime tack coat with bituminous primer@10kgs/Sqm(VG-10) etc complete all as specified and directed.

M&L for laying bituminous premix asphaltic dense concrete 40mm (consolidated thickness) with mechanical paver, mixed at hot mix plant transported to site on tippers chipping mixed with 5.5% paving binder ( VG-30) viscosity grade rolled to uniform smooth surface with 8 to 10 tonne power road roller & compacted to required camber and gradient complete all as specified.

M&L for laying bituminous premix asphaltic dense concrete 30mm (consolidated thickness) with mechanical paver, mixed at hot mix plant transported to site on tippers chipping mixed with 5.5% paving binder ( VG-30) viscosity grade rolled and compacted to required camber and gradient and uniform smooth surface with vibratory roller and 8 to 10 tonne power road roller & compacted to required camber and gradient complete all as specified. Note : Filler for semi dense asphaltic concrete shall be stone dust @ 2% of total mix.

M&L for cleaning and preparing the road surfaces for road marking with reflective thermoplastic white 2.5 mm thick road marking paint conforming to BIS 3262, laid through road marking machine in a layer painting lines, dashes, arrows, letters etc, width not exceeding 10cm wide on roads, pavements with road marking paint, white or golden yellow of CRYSTALEX, using 5 Kg material per square meter by incorporating the white glass beads for reflectivity etc, complete all as specified & directed.

S&F in repair ABS Plastic Stud (Cat Eyes) dynamically designed conforming to IRC67 1977 of defferent colour as approved, having height impact strength and load capacity 40 ton, and fitted with 2 Nos high reflective reflectors on both sides including fixing arrangement as per manufacturer’s instructions and as directed. Make: Cat eyes of DA Dark eye or equivalent as in /Tata VPI/ Gogia Plastic/3M

S&F in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 90mm of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright three LEDon both side with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed

Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15 cm thickness (below or above ground level) etc complete all as specified and directed

M&L for providing cement concrete (1:4:8) type D.2 using 40mm graded stone aggregate as in foundation, filling and mass concrete etc, complete all as specified and directed

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade, with grey cement and no pigments, laid over and including 25 mm thick sand cushion and joints of interlocking tiles filled with dry sand and compacted with mechanical plate vibrator complete all as specified and directed

M&L for kerb stone of cement concrete (1:2:4) type B1 using 20mm graded stone aggregate, rounded or chamfered on edges, set in mortar (1:4) complete all as specified and as directed.

M&L for Providing, cement concrete type B-0(1:2:4) using 20mm graded aggregate in roof kerbs or mud stops, fixing poles, coping rounded or chamfered on edges etc. complete all as specified and directed.

Schedule of Credit

PUSHPA G ENTERPRISES (BID ID -3098283)

M/S Anil Enterprises (BID ID -3095984)

JAGDAMBA CONSTRUCTION COMPANY (BID ID -3100035)