Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.6 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹27.8 L+₹84,215 (3.13%)Rejected-Finance | L2 | Rejected-Finance Bidder quoted higher rate | |
| 3 | L3₹29.9 L+₹3.0 L (11.2%)Rejected-Finance | L3 | Rejected-Finance Bidder quoted higher rate | |
| 4 | L4₹31.1 L+₹4.2 L (15.5%)Rejected-Finance | L4 | Rejected-Finance Bidder quoted higher rate | |
| 5 | L5₹31.1 L+₹4.2 L (15.5%)Rejected-Finance | L5 | Rejected-Finance Bidder quoted higher rate |
| Sl No | Description | Qty | Unit | BIJAY MITTAL L2 | KAMLESH ENTERPRISE L1 | NISHA CONSTRUCTIONS L4 | KARMA TSETEN BHUTIA L6 | S K ENTERPRISES L8 | SANJAY KAUSHIK L7 | M/S ANIL KUMAR THAKUR L3 | SANJAY MITTAL L5 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of Brickwork or stone/ boulder masonry built in cement mortar complete as in Retaining Wall complete all as specified and as directed. | 14 | CUBIC METRE | 800 ₹11,200 | 750 ₹10,500 Lowest | 950 ₹13,300 | 975 ₹13,650 | 900 ₹12,600 | 920 ₹12,880 | 875 ₹12,250 | 972 ₹13,608 |
| 2.00 | Rough excavation not exc 1.5m deep and getting out in soft/ disintegrated rock for foundation of Retaining Wall complete all as specified and as directed. | 120 | CUBIC METRE | 300 ₹36,000 | 280 ₹33,600 Lowest | 375 ₹45,000 | 400 ₹48,000 | 350 ₹42,000 | 360 ₹43,200 | 365 ₹43,800 | 378 ₹45,360 |
| 3.00 | Excavation over areas not exceeding 1.5 deep in soft/ disintegrated rock for foundation of retaining wall complete all as specified and as directed. | 70 | CUBIC METRE | 470 ₹32,900 | 450 ₹31,500 Lowest | 600 ₹42,000 | 610 ₹42,700 | 550 ₹38,500 | 600 ₹42,000 | 575 ₹40,250 | 594 ₹41,580 |
| 4.00 | M&L for PCC (1:3:6) type C2 (using 40 mm graded crushed stone aggregate) as in foundation and mass concrete complete all as specified and directed. | 25 | CUBIC METRE | 8,800 ₹2,20,000 | 8,500 ₹2,12,500 Lowest | 9,100 ₹2,27,500 | 9,150 ₹2,28,750 | 11,500 ₹2,87,500 | 9,150 ₹2,28,750 | 9,700 ₹2,42,500 | 9,720 ₹2,43,000 |
| 5.00 | M&L for PCC (1:3:6) type C2 (using 40 mm graded crushed stone aggregate) as in retaining walls etc complete all as specified and as directed. | 150 | CUBIC METRE | 9,700 ₹14,55,000 | 9,500 ₹14,25,000 Lowest | 11,000 ₹16,50,000 | 11,200 ₹16,80,000 | 12,000 ₹18,00,000 | 11,500 ₹17,25,000 | 10,300 ₹15,45,000 | 10,800 ₹16,20,000 |
| 6.00 | Material & labour for PCC (1:2:4), type B-1 (using 20mm graded crushed stone aggregate) as in coping, bed plates including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed. | 4 | CUBIC METRE | 10,700 ₹42,800 | 10,500 ₹42,000 | 11,500 ₹46,000 | 11,600 ₹46,400 | 1,800 ₹7,200 Lowest | 11,800 ₹47,200 | 11,700 ₹46,800 | 11,664 ₹46,656 |
| 7.00 | M&L for RCC M-25 (Design Mix) as in foundation, including rafts, footings, foundation beams, bases for columns etc complete all as specfied and as directed. | 12 | CUBIC METRE | 12,500 ₹1,50,000 | 12,000 ₹1,44,000 Lowest | 13,000 ₹1,56,000 | 13,150 ₹1,57,800 | 13,000 ₹1,56,000 | 13,600 ₹1,63,200 | 12,900 ₹1,54,800 | 13,716 ₹1,64,592 |
| 8.00 | Use and waste of formwork to faces of walls,retaining wall etc; vertical or batter for rough finished surfaces complete all as specified and as directed. | 300 | SQUARE METRE | 580 ₹1,74,000 | 550 ₹1,65,000 Lowest | 625 ₹1,87,500 | 630 ₹1,89,000 | 650 ₹1,95,000 | 600 ₹1,80,000 | 595 ₹1,78,500 | 626 ₹1,87,800 |
| 9.00 | S&F TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping of columns, hooking ends and biniding wireand including mild steelw wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and as directed. | 580 | KG | 150 ₹87,000 | 148 ₹85,840 Lowest | 170 ₹98,600 | 165 ₹95,700 | 155 ₹89,900 | 160 ₹92,800 | 153 ₹88,740 | 164 ₹95,120 |
| 10.00 | All as per item No 9.00 here-in-above but 5 mm and over upto and including 10 mm dia in stirrups spacers and binders complete all as specified and directed. | 270 | KG | 152 ₹41,040 | 148 ₹39,960 Lowest | 170 ₹45,900 | 165 ₹44,550 | 152 ₹41,040 | 160 ₹43,200 | 155 ₹41,850 | 164 ₹44,280 |
Tender Value
₹31 L
EMD Value
₹62,000
Closing Date
16 Aug 2025, 6:00 pmClosed
GE Gangtok
GE Gangtok New Mil Stn Gangtok Sikkim
PROVN OF RETAINING WALL NEAR BLDG NO MAJ 04 SAGAT SINGH ENCLAVE AT NEW MIL STN UNDER GE GANGTOK
2025_MES_721863_1
8361/A/E8
Open Tender
Miscellaneous Works
Works
182 days
GE Gangtok New Mil Stn Gangtok Sikkim
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Gangtok
₹62,000
Yes
1 Sept 2025
22 Jul 2025
18 Aug 2025
22 Jul 2025
16 Aug 2025
28 Jul 2025
Amount
Demolition of Brickwork or stone/ boulder masonry built in cement mortar complete as in Retaining Wall complete all as specified and as directed.
Rough excavation not exc 1.5m deep and getting out in soft/ disintegrated rock for foundation of Retaining Wall complete all as specified and as directed.
Excavation over areas not exceeding 1.5 deep in soft/ disintegrated rock for foundation of retaining wall complete all as specified and as directed.
M&L for PCC (1:3:6) type C2 (using 40 mm graded crushed stone aggregate) as in foundation and mass concrete complete all as specified and directed.
M&L for PCC (1:3:6) type C2 (using 40 mm graded crushed stone aggregate) as in retaining walls etc complete all as specified and as directed.
Material & labour for PCC (1:2:4), type B-1 (using 20mm graded crushed stone aggregate) as in coping, bed plates including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.
M&L for RCC M-25 (Design Mix) as in foundation, including rafts, footings, foundation beams, bases for columns etc complete all as specfied and as directed.
Use and waste of formwork to faces of walls,retaining wall etc; vertical or batter for rough finished surfaces complete all as specified and as directed.
S&F TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping of columns, hooking ends and biniding wireand including mild steelw wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and as directed.
All as per item No 9.00 here-in-above but 5 mm and over upto and including 10 mm dia in stirrups spacers and binders complete all as specified and directed.
S&F PVC(SWR) pipe 75mm dia single socketed, in any length as in weep holes complete all as specified and directed.
Labour only for hand packing using broken stone or boulders (any thickness) at back of block masonry retaining wall and raising or lowering to the required level complete all as specified and directed. (using item obtained from item No 1)
M&L for hand packing using broken stone or boulders (any thickness) at back of block masonry retaining wall and raising or lowering to the required level complete all as specified and directed.
S&F of geosynthetic material 75mm dia as in weep holes cover complete all as specified and as directed.
M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in thick as in soft / loose soil complete all as specified and directed.
Removing excavated material exceeding 1.50 km but not exceeding 5 km and depositing complete all as specified and as directed.
Surfaces excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil, complete all as specified and as directed.
M&L Hardcore of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15 Cm thick, watered and rammed to a True Surface, complete all as specified and as directed.
M&L for 100mm thick PCC (1:2:4) type B2 (using 40mm graded curshed stone aggregate) as in hardstanding/ path etc including finish the surface even and fair without using extra cement complete all as specified and as directed.
M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in plinth protection/path etc finishing the surface even & smooth without using extra cement complete all as specified and as directed.
M&L for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in surface channels/drain including forming fair finished to drain channel complete all as specified and as directed.
M&L for raking out joints/pointing to random rubble masonary coursed or uncoursed work in walls on edge in floors, surface channels, roofs etc complete all as specified and as directed.
S&F Joist, channel, angle, or tee sections, fixed independtly, without connecting plates, etc. (cut to ordinary lengths i.e, within 20mm of the length indicated) confirming to Fe-410-W (Code-E-250), quality - A, completed all as specified and as directed.
S&F MS bolt of dia 11 to 15 mm and length of bolt exc 5 cm and n.exc 10 cm (machine made) with hexagonal or square head at one end and screwed other with washer out of shank.
S& F Pre PVC coated chain link fencing, size of mesh 50mm x 50mm made out of 4mm dia GI wire (confirming to relevant IS) to any type of standard rails, straining bolts etc complete all as specified and as directed.
S&F 10mm and over round bars hoping of columns, hooking ends as in line wire for securing fencing etc complete all as specified and as directed.
M&L for preparation of new or previously untreated steel surfaces of any description n.exc 10cm in width or girth applying two coats synthetic enamel paint (1st graded quality) over one coat of red oxide primer complete all as specified and as directed.
Dimmantling water tanks exc 500 ltr and n.exc 1000 ltr capacity and removing to store complete all as specified and as directed.
S&F rotational moulded polythylene water storage tank, 500 litres capacity, anti bacterial, UV and heat resistant 3 layer (ISI marked) multi layer construction (cylindrical vertical with closed top), hoisted & fixed in position including supply and fixing of 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe of having weight not less than 210 gms, with threaded cap/Lid including connection including dismantling of old unserviceable water tank complete all as specified and as directed.
S&F for 20mm gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
Taking down 20mm dia steel tubing and connections, including cleaning and refixing or removal to store complete all as specified and as directed.
S&F galvanised steel water tubing 20mm bore, medium grade with all fittings and fixed complete to walls/ ceiling or kaid in floors complete all as specified and as directed.
BIJAY MITTAL (BID ID -3393313)
M/S ANIL KUMAR THAKUR (BID ID -3394637)
NISHA CONSTRUCTIONS (BID ID -3393977)
SANJAY MITTAL (BID ID -3395482)
KARMA TSETEN BHUTIA (BID ID -3394137)
SANJAY KAUSHIK (BID ID -3394421)
S K ENTERPRISES (BID ID -3394206)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .