Const of food store building at Dogerpora

Earth work in excavationin in trenches for foundation, drains,pipes cables etc )not exceeding 1.5mtr in width ) and for shafts ,wells,cesspit and the like not exceeding 10sqm on plan incluidng all kinds of soil upto the required depth including ramming of the bed and dressing of sides disposal of excavated earth, All kinds of soil

Providing And laying of stone soiling hand packed (including ramming ,watering consolidation and all carriage upto site).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level in 1:5:10 mix

Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size

Centering and shuttering including strutting, propping etc. and removal of form for;-

Foundations, footings, bases of columns, etc. for mass concrete

Beams,plinth beams

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete (TMT Bars).

Providing and laying in position reinforced cement concrete 1:2:4mix M15 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) of specified grade excluding the cost of centering and shuttering -in suspended floor ,lintels, beams,balconies,landing stairs having upto 15degree slope including cost and carriages all material involved. All works from plinth upto floor v level

Brick work with FPS bricks of class designation 75 in superstructure to floor v level in cement mortor 1:6 (1 cement :6 coarse sand)

Extra for brick work in superstructure upto V level

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarses and : 6 graded stone aggregate 20mm nominal size).

12 mm cement plaster on the rough side of single or half brick wall of mix 1: 6 ( 1 cement : 6 fine sand ) incluidng all carriages

Structural steel welded in built up section in window frames incluidng priming coat of approved steel primer

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade in Two or more coats on new wood work.

Finishing walls with water proofing cement paint of required shade New work (Two or more coats applied @ 3.84 kg/10 sqm)

P/L of vitrified floor tiles of size 600x600mm ( thickness to be sepecified by the manufacture ) with water absorption less than 0.08% and conforming to IS:15622 of approved make ,in all colours and shades laid on 20mm thick cement mortar in 1:4 mix including grouting with white cement and matching pigment etc complete

Providing and fixing insulating laminated board 12 mm ceiling of approved quality including framework budloo work 2"x 1.5" with necessary nails and cornice etc. complete

P/F of ready made coloured sheeting including cost of nails and framework of 0'-2"x0'-2" poplar wood etc

Providing and fixing plained eaves boarding250x32 mm (nominal size )

Providing Coloured coated corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter withbitumen and G.I limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer and two coats ofapproved paint on overlapping of sheets complete (upto any pitch inhorizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.50 mm thick

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.50 mm thick with zinc coating not less than 275 gram/m2

Providing KD wood work for trusses ,purlins rafter etc

P/Supplying and fixing rolling shutters of approved make, made of requiredsize M.S. laths, interlocked together through their entire length and jointedtogether at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside lockingwith push and pull operation complete, including the cost of providing andfixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454part-1 and M.S. topcover of required thickness for rolling shutters.10.6.1 80x1.25 mm M.S. laths with 1.25 mm thick top cover

Carriage of material by mechanical transport

Sand and aggregates from15 Km

Bricks from budgam average lead 100Km

Add provision for Citizen Information board & photographs