Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹38,200
Closing Date
11 Sept 2024, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
Er Uttamsing Rathod
Drilling of borewell and water supply arrangements at 110Kv S/s Tiluvalli
KPTCL/2024-25/WS/WORK_INDENT1046
KPTCL/2024-25/WS/WORK_INDENT1046
Open
Water supply/sewage lines
Two Tender Document System(Two Cover)
KPTCL SEE Transmission Works and Mantainance Circle Hubballi
4 documents required · 0 mandatory · 4 optional
To qualify for award of this contract, each bidder in his/their name should have full fill the following requirements prescribed in the as per standard tender documents for the last 5 years, i.e., 2019-20, 2020-21, 2021-22 , 2022-23 & 2023-24 Satisfactorily completed as a prime contractor for at least one similar type of work OR any Constructive work civil engineering in nature., in any one of the above FY amounting to Rs. 7,62,400/- in any Government / Public undertaking sectors .certificates should be issued from the cadre of not less than the rank of the Executive Engineer with office outward number and date shall be scanned and uploaded
Tenderers shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by the Government of Karnataka.
Financial status and capacity supported by Line of credit/solvency certificate issued by the schedule / Nationalized Banks for Rs. 7,62,400 /- shall be obtained after the date of publish of this notification in favor the Superintending Engineer (Elecl), Transmission (Works & Maintenance) Circle, KPTCL, Hubballi shall be scanned and uploaded.
Contractor should furnish GST Registration Certificate
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract (should furnish degree certificate of technical & declaration of employment with details).
Name, address, and telephone, telex, and fax numbers of the Tenderers bankers who may provide references if contacted by the Employer.
Contractor should be EPF holder and should furnish EPF registration certificate, if not, Self-declaration should be furnished with satisfactory reasons for non-applicable of EPF.
Contractor should be ESI holder and should furnish ESI registration certificate.
Eligible Tenderers will be qualified only if their available tender capacity is more than the total tender value. (Refer Standard Tender documents Section 2: A General- Instructions to Tenderers (ITT) -3.2) Tender capacity should be more than the estimated value of number of tenders participated
Bidder should upload self declaration that his firm is not in BLACK list of any Govt. organization/ Govt. undertaking sectors/PSU. .(Undertaking format shall be uploaded along with tender documents duly mentioning the Date after the publish of this notification with Original signature ( Xerox copy of the signature will not be considered)
Bidder should upload self-declaration for his firm being responsible for any fake and false declarations. (Undertaking format shall be uploaded along with tender documents). duly mentioning the Date after the publish of this notification with Original signature ( Xerox copy of the signature will not be considered)
The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years in any organization. A history of awards involving litigations against the bidder or any part or JV (Joint Venture) may result in rejection of bid by duly mentioning the Date after the publish of this notification with Original signature ( Xerox copy of the signature will not be considered)
Achieved in at least Two financial year a minimum financial Turnover ( in all classes of civil engineering construction works only ) for Rs 15,24,800/- among the last 5 years. Turn over certificate duly certified with UDIN number by the Chartered Accountant shall be furnished.
₹500
₹38,200
4 Sept 2024
4 Sept 2024
12 Sept 2024
9 Sept 2024
Drilling of borewell and water supply arrangements at 110Kv S/s Tiluvalli
PART -"A"Drilling of Bore well 150mm dia
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 2...
50.00mtrs to100.00mtrs.
100.00mtrs to150.00mtrs.
Cost of M.S.cap for 150mm dia borewell.
Supplying 150 mm dia ERWB- Class casing pipe and the insertion of casing pipe to initial depth of 20 Mts i) insertion of casing pipe beyond 20 mts (measurements of over burden is instricted to the dep...
PART-"B" Supply & commissioning
Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor...
SUBMERSIBLE CABLES:Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest ...
PRESSURE GAUGE: Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments Size 100 mm (SR 2023-24 V-5 VP 154 I-13...
GATE VALVE: Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments 50 mm
NON-RETURN VALVE:Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments 50mm
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...
POWER CAPACITOR:Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning ...
MCB:Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/...
ERRECTION, ELECTRIFICATION & COMMISSIONING WORKS OF PUMPSETS Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply...
ERRECTION OF PANEL BOARD & METER BOARD UNIT: Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including provi...
MAIN CONNECTION:Providing,Supplying and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps,bolts,nuts and washers etc. with nec...
IN NEW TRENCH:The work shall include digging of trench 0.5m width 0.5m deep, laying the cable in trench refilling & consolidating the soil.
EARTHING: Supplying and fixing and wiring earth electrodes for grounding conduit IC cut outs and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5mtrs long buried in a pit. T...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
123 -- KW-1_1046.docx
Tender Document • 0.10 MB
Annexures.docx
Tender Document • 0.03 MB
NIT INDENT 1046.doc
Tender Document • 0.69 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .