Maintenance work at Atal Residential School Kanpur Nagar

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in 1:6 (1 cement : 6 coarse sand) DSR. 6.1.2

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With second class teak wood beading 62X19 mm.DSR-9.51.1

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). SI No. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) DSR 11.2

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. DSR 15.25

12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand)DSR NO.13.4.2

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approvedbrand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats Old work (One OR more coats) DSR- 13.81.1

Providing and fixing of ISI Marka flush doors shutter conferming to IS:2202(Part I) Non decorative type core of block board construction with frame of 1st class hard wood and well matched comercial 3 ply veenering with Vertically grains or cross bands and face veneeres on both face of shutter:. AS per (a) 30 mm Thich including ISI marked Stainless steel butt Hinges DSR No.9.21.2

Providing and fixing bright finished brass tower bolts (barrel type) withnecessary screws etc. complete :200x10 mm DSR 9.74.2

Providing and fixing bright finished brass door latch with necessary screwsetc. complete :300x16x5 mm DSR 9.75.1