CA NO CWE/PAT/T-34/2022-23 ADDITIONS ALTERATION AND REHABILATION OF MARRIED ACCN AT MIL STN SANGRUR UNDER GE SOUTH PATIALA

Amount

Taking down cement plaster on brick walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Rendering 15mm thick in cement mortar 1:4 including mixing of liquid water proofing compound of approved make as per manufacturer's instructions on fair faces of brick work or concrete surfaces or in chajjas / parapet walls etc finished even and fair without using extra cement complete all as specified and as directed. Note : WPC will be measured and paid separately.

Rendering 10mm thick in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

Complete removal of existing treatment of any type/ description from internal/ external surfaces of wall and ceiling with mechanical means/ grinder including removal of waste materials from site complete all as specified and as direrected.

Preparation of new plastered surfcace of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.

Preparation of new plastered surfcace of walls , and applying two coats of distemper oil emulsion over a coat of chalk whiting priming paint complete all as specified and as directed.

Preparation of old plastered surfcace of walls and applying two coats of cement base paint complete all as specified and as directed.

Preparation of old plastered surfcace of walls and applying two coats of distemper oil emulsion complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

Rendering 5mm thick in cement mortar 1:3 as on concrete surface in ceiling finished even and smooth without using extra cement complete all as specified and as directed.

Preparation of new plastered surface applying three coats of white wash on ceiling complete all as specified and as directed.

Preparation of old plastered surface of ceiling and applying one coat of white wash complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and as directed.

Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 compete all as specified and as directed.

Brick work in CM 1:4 with sub class B bricks straight or curved on plan to any radius but in half brick wall complete all as specified and as directed.

Taking down chowkhats or frames ( without taking off shutters from the frame) exc 1.5 sqm and n. exc 4.00 sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and as directed.

As per serial item No. 16 herein before but n ece 1.5 sqm each.

Pressed steel frames made of MS sheet of 1.25 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 105 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

Pressed steel frames made of MS sheet of 1.25 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc. of size 125 x 60mm incl cutting holes and making good required shape for hold fast block for new frame complete all as specified and as directed.

Plain Cement Concrete 1:3:6 type C-0 using 12.5 mm graded mechanically crushed stone aggregate as in back filling of pressed steel frame/ hold fast block etc and similar compelete all as specified and as directed.

35mm thick 2nd class hard wood plain framed (factory made) panneled shutter (two panel) with lock rail and panels of 9mm B.W.P. commercial ply with commercial veneering on both faces including beading on the facing side of shutter as per SSR part 1 clause No. 8.17.5. The size of rail and sities as per IS 1003(Part 1) kiln seasoned and chemically pressure treated all as specified and as directed.

35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-1 section 8 clause 8.24(a), kiln seasoned and chemically pressure treated all as specified and as directed.

Aluminium anodised barrel tower bolt 200 mm long stove enamelled black with bright bolt and fixed complete all as specified and as directed.

Aluminium anodised sliding door bolt of size 300mm, stove enamelled black with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts complete all as specified and as directed.

Extruded aluminum alloy handles 150mm size fabricated type, anodised complete all as specified and as directed.

Mild Steel butt hinges of size 100 mm medium weight cold rolled fixed in repairs including all necessary welding etc complete all as specified and as directed.

Mild Steel, 300 mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed.

Providing and fixing factory made extruded aluminium casement windows (with provision for cooler) with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf.

Factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m fixed in position in windows in all respect complete all as specified and as directed.

Providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beed 20mm size with and complete all as specified and as directed.

Built in steel cup board with pressed steel frame of size 75 mm x 45 mm x 1.25 mm thick with pressed steel shutter 01 mm thick Godrej pattern fixed to masonry wall by hold fasts, made out of 25 x 3 mm flat iron including mild steel, CP hanging rod of 20mm dia with brackets fixed on inner side of one leaf of shutter and on other leaf provision of mild steel CP peg set of 3 (All as shown on Drg. No. 178 sheet 2/3 & 3/3 dt 12.06.2001) including spray painting with two coats of synthetic enamel paint over a coat of red oxide primer on all exposed steel surfaces including taking down old existing cup boards and making good disturbed portion to match with the existing surfaces complete all as specified and as directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and as directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, fixed in opening complete all as specified and as directed.

S&F 100mm butt hinges, extrude aluminum alloy with galvanised mild steel hinge pin, anodised complete all as specified and as directed.

Wire netting of galvanised steel wire 1.40 mm dia and size of mesh 25 mm fixed with tinned tacks of wire staples complete all as specified and as directed.

Preparing of new surface of wood and wood based material of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors/ FF and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed..

Dismantling of floor, hearth or wall tiling including cement bortar bedding but not backing and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for cement concrete 25 mm thick, 1:2:4 type B-0 using 12.50 mm grade crushed stone aggregate complete all as specified and as directed.

M&L for vitrified floor tiles, area of each tile exceding 0.18 sqm but not exceding 0.38 sqm, 8 -10mm thick in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Coloured Ceramic tiles 7-8 mm thick area of each tile exceding 0.18 Sqm but not exceding 0.38 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Anti skid coloured pressed creamic floor tiles of min size 300x300 mm 8-10 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Coloured glazed Ceramic tiles 350x250x7mm/450x350x7mm thick as in vertical surface such as skirting , dados etc. jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

S&F in replacement sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mmm, bowl size 410mmx330mmx160mm complete all as specified and as directed.

Taking up or down steel tubing of size 15mm bore and removal to store complete all as specified and as directed.

Taking up or down steel tubing of size 20 mm bore and removal to store complete all as specified and as directed.

Supply and laying of 16mm outer dia CPVC pipes SDR11 & plain CPVC SDR 11 fitting fixed on wall / celling or laying in floor complete all as specified and as directed.

Supply and laying of 20mm outer dia CPVC pipes SDR11 & plain CPVC SDR 11 fitting fixed on wall / celling or laying in floor complete all as specified and as directed.

S&F in repair mild steel chromium plated 20mm dia curtain rods with fixing brackets, stops rollers complete including fixing brackets, stop etc all as specified and as directed. ( Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered)

Dismanting of brick tiles or terracing tile single layer on roof complete all as specified and as directed.

Demolition of mud phuska on roof any thickness not exc. 50 mtr and deposting where directed at a level n. exc. 1.50m above the starting point complete all as specified and as directed.

Roughening surface of old concrete floor by picking , sweeping cleaninh and washing down with water to remove dust etc complete all as specified and as directed..

Cement concrete 1:3:6, type C-0 using 12.5mm graded stone aggregates as in padding over roof, minimum thickness at khurra as 50mm to maintain a slope of 1:100 using water proofing compound complete all as specified and as directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

Cement concrete 1:2:4 type B-0 using 12.5mm grade crushed stone aggregate as in roof kerb or mud stopes / coping etc. including weathering slightly rounded or chamfered all as specified and as directed.

Providing and laying APP (Atactic polypropylene polymer) modified pre- fabricated five layer water proofing membrene 3mm thick having weight not less than 3.60 kg/sqm black finished reinforved with non wooven polymer matt fix after applying one coat of cold applied solvent based bituminious primer @ 0.40ltrs per sqm using bolane torch and sealing all joints etc. confirming to IS 3488 and cement plaster 15mm thick in cm 1:3 all as per manufacturer's instruction complete all as specified and as directed.

Cement concrete tiles 20-22 mm thick, type B-1, 1:2:4, pointed in nest cement,slury over and including 15 mm thick screeed bed in cement mortar 1:4 complete all as specified and as directed.

Coolar stand made of joist, channel, angle or tee section, fixed independitaly, without connecting plates, conforming to Fe 410 -W ( Gde-E-250) quality-A complete all as specified and as directed.

Framed work as in door or gates of angles or other section with gussets plate rails braces etc. complete drilled for fixing of steel sheeting or other covering. Doors to be prepared for hanging or sliding with and including either hook and hinges or steel hanging door fitting steel sheeting or other covering running rails and hanging also fastening and fixing complete including pintel hinges stops hand sliding bolts etc. confirming to Fe 410-O or Fe-310-O, including taking down old steel gate complete all as specified and as directed.

Preparing surfaces of any description over 10 cm width or girth, not otherwise described any applying two coats of synthetic enamel paint over a coat of red oxide on new surface of steel or iron complete all as specified and as directed.

PVC (SWR) rain water pipes 110 mm bore single socketed in any length with rubber ring joint fixed to the wall complete all as per specified including flat iron clamp 25x3mm and taking out old rain water pipes complete all as specified and as directed.

PVC (SWR) bends of any radius for 110mm dia rain water pipes with rubber ring joints complete all as specified and as directed.

Dismantling 500 litres water storage tank and removing from site complete all as per specified and as directed.

Rotational moulded polyethylene water storage tanks cylindercial vertical with closed top 500 lts capacity hoisted and fixed in position including 20 mm bore ball brass valve high pressurre with polythene float and fly nut complete all as specified and as directed.

125 mm brass chromium plate shower rose with arms complete all as specified and as directed.

CP stop cock concealed cast copper alloy with crutch screwed down screwed for brass ferrule 15 mm bore pipe vomplete all as specified and as directed.

Bib tabs 15 mm dia pipe, cast coper alloy cromium plated with capstain head screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

Wall mixer hot and cold mixture cast copper alloy fancy type 15mm bore, with capstan heads chromium plated screwed down high pressure complete all as specified and as directed.

Self closing pressmatic pillar cock, cast coper alloy, fancy type, suitable for 15mm bore pipe, with capstan head, chromium plated screwed down high pressure complete all as specified and as directed.

Angle valve cast copper alloy cromium plated with capstan head, long shank and cup concealed type,15 mm bore complete all as specified and as directed.

450 mm long PVC connections with brass nuts on both ends for 15m bore pipes of approved quality complete all as specified and as directed.

S&Fin repair vitreous china wash hand basin, white, flat black, size 550 x 400mm, including PVC waste pipe 32mm bore and mild steel brackets, incl. cutting for or pinning in brackets complete all as specified and as directed.

S&F in repairs tubular towel rail CP 20mm dia 60 mm long between flanges complete all as specified and as directed.

Shelf of PTMT fixed with and including chromium plate brass screw and wooden/ plastic cleats (min wt. 300 gms) complete all as specified and as directed.

S&F in repairs low level flushing cistern of 10 litres capacity, including 45cm long PVC connection with brass nut at both ends, 15 dia stop cock cast copper alloy, screwed both ends, high pressure (wt. not less than as specified in SSR), PVC flush pipe 32 mm bore complete all as specified and as directed.

S&F in repair viterous china ware wash down water closet Orrisa pattern size 580x440mm white with integral foot rest including connection to traps and to flushing pipe, anti syphonage pipe complete all as specified and as directed.

S&F in repair viterous china wash down water closet pan (pedestal pattern) white including white plastic seat cover with mild steel CP hinging device, jointing connection and making good the distrubed surface complete all as specified and as directed.

Cement concrete 1:3:6, type C-2 (using 40 mm graded aggregate) 50 mm thick as in path, plinth protection finished the surface even and smooth without using extra cement complete all as specified and as directed.

Demolition of reinforced cement concrete of any description (reinforecement cut as required to facilitate demolition ) complete all as specified and as directed.

M&L reinforced cement concrete 1:2:4 type B1 (using 20mm graded crushed stone agg.) as in slab support on wall, beam and column in floor roof lading balconies deck slab and in shelves and the like complete all as specified and as directed.

M&L for reinforced cement concrete 1:2:4 normal mix type B0 (12.5mm graded aggregate) as chajja and the like complete all as specified and as directed.

TMT bars 6-8 mm dia and over mild steel as in reinforcement, cut to length bend to shape required including cracking and bending with MS wire ( anealed ) not less than 0.9 mm dia or securing with clips all as specified and as directed.

Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cill, cooking plate forms and like in white cement with admixture of pigment to match with shade of granite stone including grinding and polishing, laid over and incl. 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.

Rounding to edge of stone sabs one edge, such as on steps, cooking platform and other similar situations complete all as specified and as directed.

Machine cut kota stone slab as in flooring 20 mm (+2) mm thick laid over and incl. 15 mm thick screed bed or bedding layers in CM 1:4 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, rubbing and polishing complete all as specified and as directed.

S&F in replacement mild steel peg set of 6, powder coated fixed to wall with steel screw complete all as specified and as directed.

S&F in replacement stainless steel wall mounted kitchen dish/ plate rack of size 900mm x 750mm x 250mm complete all as specified and as directed.

S&F in replacement stainless steel wall mounted kitchen dish rack plate of size 750mm x 600mm x 250mm complete all as specified and as directed.

S&F on wall PVC enclosed case ( cabin type) of size 350mm x 450mm x 100mm with cover and looking mirror and two shelves, fixed in repair complete all as specified and as directed.

S&F in replacement cast iron pipe sand cast waste and vent pipe in any length with or without ears with cement joint laid in trenches or in floor of 100mm bore with sand cast paper all as specified and as directed.

S&F in replacement CI cowl of 100mm dia complete all as specified and as directed

S&F in replacement cast iron floor trap 75 mm dia with grating including jointing to waste pipe in neat cement and fixed in cement concrete1:2:4 typre B1 complete all as specified and as directed.

S&F in replacement cast iron P & S trap 100 mm dia with grating including jointing to waste pipe in neat cement and fixed in cement concrete 1:2:4 typre B1 complete all as specified and as directed.

S&F in replacement 100 mm bore cast iron bends ( any radius ), diminishing pieces or tapers (larger bore measured ) complete all as specified and as directed.

S&F in replacement cast Iron 100 mm branch pieces, double/ cross, Tee (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branch complete all as specified and as directed.

S&F in replacement 100 mm bore stack clamp out of 50x 5mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

18 mm thick with minimum density 600 Kg/cu.m LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets as per manufacturer’s specifications complete all as specified and as directed.

18 mm thick with minimum density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single rigid laminated of approved colour and other side plain white colour fixed with screws and solvent cement/ adhesive to make kitchen cabinet shutter and shelves complete as per manufacturer’s specifications complete all as specified and as directed.

12 mm thick LEAD FREE PVC celuka ply of approved colour fixed with screw , solvent cement/adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as pe anufactured specification complete all as specified and directed.

Auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respected and fixed in position all as specified and as directed.

Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs complete all as specified and as directed.

Piano/continuous hinge of size 30 mm stainless steel complete all as specified and as directed.

D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished fixed in position complete all as specified and as directed.

Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/cup&saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required size fixed in position complete all as specified.

Stainless Steel 304 grade basket cutlery of size 370x485 mm permium quality complete fixed in position complete all as specified.

Dismantling loose/ disintegrated portion of RCC chajja, bands, shelves, beam and similar work including provision of supports if required and dubbing with PCC 1:1.5:3 using 6 -12 thick graded stoen aggregate in any portion of 15mm -50 mm thick and finshing to desried shapes complete all as specified and as directed.

Demolition of cement concrete of any description and any position not otherwise specifically provided for below or above the ground level complete all as specified and as directed.

Cement concrete 1:2:4, type B-0 using 12.5mm graded stone aggregate, 25mm thick mixing with WPC as in bedding in sucken portion etc . complete all as specified and as directed.

Cement concrete 1:7:12, type E-2 using 40 mm grade brick aggregate as in filling of sucken portion etc. complete all as specified and as directed.

Applying three coats of brush bond acrylic based cementitious material of approved quality for sunken portion treatment all as manufacturer,s instruction and providing 200 micron thick polythee flim over 85/25 grade bitumen layer @ 0.5 kg /sqm all as specified and as directed.

Providing 40mm dia GI pipe medium grade spouts 50 cm long complete all as specified and as directed.

Gun metal globe or gate valves of 20 mm dia with iron wheel head screwed both ends for iron and fixed in repair complete all as specified and as directed.

PTMT Jet Spray with 1.0 metre PVC tube (suitabale for european seat ) complete all as specified and as directed.

Toilet Paper Holder with flap model, chromium plated, fixed in repair complete all as specified and as directed.

Taking down carefully existing points wiring on surface conduit/concealed conduit for light/ fan/socket /power/ bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, peace of wires,gutties, conduit, wooden boards etc and making good the disturbed portion of all floor, ceiling etc complete all as specified and as directed.

Taking down unserviceable main switch, DB's insulators, DB for MCB etc. of any type and any capacity and making good the distrubed surface and matching the colour of wall the existing colour wash/ paint/ disteper wherever required (as per the existing) complete all as specified and as directed. Note : Old MCB/ MCCB shall be taken down from existing DBs and segregated as serviceable and unserviceable seperately. Serviceable MCB/ MCCB shall be deposited in MES store yard and proper RV (Receipt Voucher) shall be obtained by contractor for accounting. Unserviceable MCB/MCCBs shall be contractor's property for which credit shall be afforded by the contractor as per credit schedule.

M & L for point wiring with 1.5 sqmm copper conductor cable (multistrand) FRLS single core PVC insulated cable for one light / fan point in existing conduit terminated in sunken / pressed metal flush box with and including modular cover plate with frame for mounting of switches / sockets / fan regulators etc and continuous earth wire 1.5 Sqmm copper cable PVC insulated FRLS controlled by one switch for one light / fan / sockets point all as specified and as directed. Notes : (i) Eye / bottle thimbles shall be used for connection in switches / sockets and MCB's in DB's without any extra cost. (ii) Electric rewiring should be done in proper colour coding i.e Red for phase, Black for neutral and Green for Earth. (iii) Necessary cutting chasing including replacement of defective concealed conduit wherever required and making good the disturbed surface shall be part of job at no extra cost.

All as per Sl item No 118 here in before but for light / fan point controlled by two 2 way switch complete all as specified and as directed.

All as per Sl item No 118 here in before but for one 5Amp socket point on independet board complete all as specified and as directed.

All as per Sl item No 118 here in before but for one 5pin 5Amp socket point on same board but with other switches complete all as specified and as directed.

All as per Sl item No 118 here in before but for one bell / buzzer point controlled by one push button on independent board complete all as specified and as directed.

All as per Sl item No 118 here in before but for one 15 Amp Socket outlet independent with 2.50 Sqmm (Nominal cross sectional area) FRLSH PVC insulated and unsheathed 1100 volts grade multi stranded copper conductor single core cable for phase, neutral and earth complete all as specified and as directed.

S&F in replacement Sub Main Wiring with two run of 6.0 Sqmm (Nominal cross sectional area) FRLSH PVC insulated and unsheathed 1100 volts grade multistranded copper conductor single core cable drawn through existing conduit complete including one run of FRLSH PVC insulated and unsheathed single core multistranded copper conductor cable of size 6.0 Sqmm green in colour as earth continuity conductor connected to common earth dolly for main DB to Sub DB and for AC complete all as specified and as directed. Note : Two run of main cable and one run of earth wire shall be measured as one unit i.e 01 Running Metre for Payment Purpose.

Modular Switch 1 way 6A 1module type complete all as specified and as directed.

Modular Switch type, 6 Amp, 240 Volts, 2 way complete all as specified and as directed.

Modular switch type, 16 Amp, 240 Volts, 1 way complete all as specified and as directed.

Socket outlet modular type, 6 Amp complete complete all as specified and as directed.

Socket outlet modular type, 6 & 16 Amp complete all as specified and as directed.

Modular Bell switch 1 way , 6 amps , 1 module complete all as specified and as directed.

Fan regulator 120 W modular type 2 module complete all as specified and as directed.

Ceiling rose surface bakelite surface 65x50 mm 3 treminals all as specified and as directed.

S&F in replacement surface mounted decorative ultra slim LED tube light fitting, with extruded polycarbonate body environmental friendly, energy efficient, 4 ft long including 3 core flexible wire 0.5 sqmm copper cable connection with ceiling rose complete all as specified and as directed. Cat Part No LHEXACP7UN1W020 of Havells or equivalent in Makes as per Appendix B

S&F in replacement surface mounted decorative ultra slim LED tube light fitting, with extruded polycarbonate body environmental friendly, energy efficient, 2 ft long including 3 core flexible wire 0.5 sqmm copper cable connection with ceiling rose complete all as specified and as directed. Cat Part No LHEXACP7IN1W010 of Havells or equivalent in Makes as per Appendix B

S&F in replacement surface mounted decorative LED Bulk head back lit luminaire of cap 10 W with comprising ofhigh brighness LEDs and connection with flexible wire 0.5 sqmm copper cable complete all as specified and as directed. Cat Part No HEXAFT10WLED857SSYMBOPC of Havells or equivalent in Makes as per Appendix B

S&F in replacement decorative wall mounted LED light fitting suitable for 9 watt lamp B22 base (with and including LED lamp 9 to 12 watt) Cat Part No LHFOFTE1TZ1W012 of Havells or equivalent in Makes as per Appendix B complete all as specified and as directed.

S&F in replacement bell ding dong operating on AC 230 V single pahse complete all as specified and as directed.

Sheet metal enclosure for DB's when MCB/ MCCBs are to be used, double door, powder coated, with 200 Amps rated bus bar and commom netural link SPN 8 ways with IP54 protection, flush mounted with wall and making good to match with existing wall surface complete all as specified and as directed. NOTE: Connections of wire with MCB shalll be done with apppropriate size of eye/ bottle thimble of brass/ cooper.

All as per item 138 here-in-before but TPN 4 ways

S&F MCB TPN 63 Amp 415 Volt complete all as specified and as directed .

S&F MCB SPN 32 Amp 240 Volt, 'B' curve, 10 KA complete all as specified and as directed .

MCB, SP, 240 V, 6-32 Amp 'B' curve for fixing in DBs including proper thimble connection complete all as specified and as directed.

Taking down old meter board after removing all electric connection and S&F sheet metal enclosure (factory made) size 20x25x12.5cm deep box made out of 2 mm thick MS sheet with double door with locking arrangment, epoxy powder coated, holes drilled for cable entries and refixing existing electric energy meter including flushing the box in walll and making good disturbed portion of wall/ surface to match with existing finishes complete all as specified and as directed.

Supply, laying, Jointing and testing cable XLPE insulated, screened, PVC beded , galvanized steel wire armoured, electric, power cables (heavy duty) 1100 V grade with stranded aluminum conductor of size 25 sqmm 4 core laid in trenche / on poles/ walls/ in ducts/ passing through pipes with necessary cable lugs, bolts, nuts and washers including taking out old cable and cable covers complete all as specified and as directed. Note :- Earth work, cable covers, sand cushioning and GI Pipe shall be measured and paid separately under respective item.

Excavation in trenches n exc. 1.5 m wide and n. exc. 1.5 m in depth and getting out in soft / loose soil complete all as specified and as directed.

Returning filling in including spreading , levelling, and well ramming in layer n exc. 25 cm each layer of any kind of soil complete all as specified and as directed.

Removing surplus excavated material from site n. exc. 50 m from starting point and deposting where directed at level not exc. 1.5 m avobe the starting point complete all as specified and as directed.

Sand cushioning (dry sand) to underground cable for cable protection 23 cm thick in two layers (8 cm thick before laying of cables and 15 cm thick after laying the cable) and punning down the sand to 18 cm thickness complete all as specified and as directed. Note:- Only punned thickness ie 18 cm of sand shall be measured for payment purpos).

Supply and laying common burnt clay building bricks sub classs 'B' designation 75, old size bricks, laid in trenches for cable protection complete all as specified and as directed.

Material and labour in replacement of GI tubing light grade 40 mm bore for passing through cables under the foor , along the wall or along the pole complete all as specified and as directed.

M&L earthing with galvanised steel plate earth electrode 60cmx60cmx6mm thick, burried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of earth plate not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolt, nut check nuts and washer of galvanised iron or steel with15mm bore GI light grade protection pipe and 20mm bore GI medium grade watering pipe, charcoal & common salt in alternate layers all as per electrical plate No 5 of SSR Part-I including PCC 1:2:4 type B-1 using 40mm graded stone aggregate pit, CI cover and frame including all earth works and connecting to earting test point and testing on completion including taking out serviceable materials from existing earthings complete all as specified and as directed.

Supply and fix modular blank plates complete all as specified and as directed.

Supply and fix exhaust fan, steel body, AC single phase, 230V of size 300mm sweep with blades, frame and louvers including making suitable hole in the wall and fixing the exhaust fan with suitable size of anchor bolts, making good the disturbed surface of wall to match with the existing finishes complete all as specified and as directed.

M&L for effloresence treatment by applying two layers of fast flex Dr fixit (Pidilite) over brick surface after taking down plaster from brick work and applying 15mm thick cement plastering in CM 1:4 and mixing of (URP 301) over treated surface complete all as specified and as directed.

Providing mixing & applying two component Epoxy resin concrete bonding coat on prepared RCC surface as per manufacturer's instructions including preparation of surfaces by chipping and thoroughly cleaning of surfaces complete all as specified and as directed.

M&L for applying a ready to use non shrink, cementitious free flow micro-concrete (>100mm) complete all as specified and as directed. Product : Sika Rep Microcrete-4 + adequate coarse aggregate. Yield : approx. 17 ltr/bad (30kg) ( depending on the size and quantity of coarse aggregate added) Product requirements : compressive strength >60N/sq mm (28 days ) accroding to ASTMC 1107-99